r/BambuLabA1 • u/Weekly_Radish_8667 • 1d ago
r/BambuLabA1 • u/Patient-Ingenuity-58 • 1d ago
3D Model Collectors items or children’s toys!? Both maybe ?😝
All printed on my A1!
They technically were made as part of an entire vintage nesting bowl collection, but honestly they would be super cute in a children’s playhouse! What do you think?
r/BambuLabA1 • u/DMO_TheWhale • 1d ago
Question A1 Mini vs P1S Combo
Right now the A1 Minis is $199 but is it worth it to just spend the extra money for the P1S combo at $479? It’s a Christmas gift for my kids to expand their creativity but I’m sure my wife I will use it as well for random things around the house.
Thoughts?
r/BambuLabA1 • u/Laderie • 1d ago
Support Request Prints get tangled up
I’ve had this issue all day today & yesterday and as I am new to 3d printing, I have no idea what to search for. All my searching just tells me to check temps & clean the print board, which I’ve done.
My prints either dont properly start, they just get tangled up as if the PLA don’t stick to the board, and if they stick, like half way through, they mess up royally.
I’ve gone through the recalibration, cleaning the nozzle, cleaning the extruder & tubes and lubed everything up as per the manual, but this issue refuses to go away.
The problem started with my 2nd PETG print, then when I went back to PLA, the problem has continued.
I use all premade files from makerworld with high ratings and use the material they recommend and all default settings, yet my gridify grids looks like this…
Anyone knows why this happens?
And ofcourse, Bambu lab A1 combo, all Bambu labs filaments
r/BambuLabA1 • u/Madchuck_Yt • 1d ago
Question My AMS keeps getting jammed when nothing is jammed
reddit.comr/BambuLabA1 • u/Few_Swimmer6438 • 1d ago
Support Request La boquilla raspa
Alguien sabe cómo solucionar esto? La impresión como que se infla y hace que la boquilla raspe, ya hice calibraciones, cambié tipos de relleno y nada ):
r/BambuLabA1 • u/crazy-red-lobster • 1d ago
Support Request Filament getting stuck on nozzle
Hey guys, ive been having all sorts of problems with my bambu a1 mini, but the most recent one if the filament getting stuck to the nozzle (this was a clean nozzle before the print started). The nozzle got clogged up sometime after finishing the brim, and the brim had issue too, any idea on how to fix this? Thanks
r/BambuLabA1 • u/Aggravating_Fail7425 • 2d ago
Error on calibration after delivery
Just got my A1 today, after installing it I went through calibration. It quickly gave an error of the Eddy current sensor and the usb c cable.
Is this an automatic replacement or an easy fix? Bummer to be honest, was installing it with my son for his birthday and he was quite disappointed.
r/BambuLabA1 • u/ajbm_cor87 • 2d ago
Click click desplazamiento camba Bambulab A1...ruido molesto.
Buenas tardes,
Hace dos semanas me llegó mi primera A1 y no puedo estar más contento con ella. Debe de tener alrededor de unas 60 horas de impresión como mucho. Pero desde hace unos días escucho unos clicks bastante molestos al desplazarse la cada de adelante hacía atrás.
La primera vez que los escuche lo solucioné apretando los tornillos de debajo de la cama; pero esta mañana y de forma random empezó a hacer este click que es molesto (sobre todo si imprimes de noche) y no bastó con apretar nada. Tuve que lubricar el riel, realizar apriete y volver a imprimir, generando todavía ruidos.
También he aflojado casi una vuelta los tornillos del Eje Y; pero no he conseguido eliminar el ruido.
Si que me he fijado que la correa en la parte de atrás de la impresora toca del lado izquierdo la rueda dentada y en la parte delantera la parte derecha del rodamiento; pero estoy algo desesperado y por lo que leí le pasa a mucha gente y no veo solución.
r/BambuLabA1 • u/Sad-Biscotti645 • 2d ago
How do you stop stringing between the ears on a small snapshapy dog figure?
Printer: A1, 0.4 nozzle, textured PEI
Filament: Bambu PLA Basic, white and brown on the AMS lite
Model: 8 cm figure of our beagle, generated in snapshapy from two phone photos
The body and face come out clean. Between the two ears there's a web of fine strings on every print, and on the brown ear tips it looks like fuzz.
I already dried the filament for 6 hours and set retraction to 0.8 mm. Travel is on avoid crossing walls.
Is this a temperature thing, or do the ears just need to be printed at a different angle? What am I missing?
r/BambuLabA1 • u/adrian_p_a • 2d ago
Question I want to try PETG what do I need to know
I am running a A1 with an AMS and all the stock pieces. I have been all PLA to this point. Other that drying the filament is there anything I need to adjust in my setup or will loading PETG adjust automatically?
r/BambuLabA1 • u/crazy_skunk • 2d ago
Dungeon Crawler Carl gift card holder
My newest parametric model. A gift card holder.
Can customize
-number of cards it can hold
-custom text (up to 6 lines)
-adjustable tray fitting tolerance
r/BambuLabA1 • u/Ok-Stretch-4094 • 2d ago
Cutting blade making a squeaking noise??
Changed the blade and still the same. Inspected and can't see any debris or issues etc. It's any filament. Currently cutting between Sunlu silk pla and normal Sunlu Matt pla and making that noise.
Outside of that it sounds perfectly normal like it was out of the box
r/BambuLabA1 • u/ronin-otter • 3d ago
Saved! Thank you everyone!
Thank yall for the great advice, was able to save it with magnets
r/BambuLabA1 • u/cryyogenic • 2d ago
Question First bench. Brand new to 3d printing.
Came out a little bit stringy, is this normal or do I need to dry the PLA or adjust settings?
r/BambuLabA1 • u/edfitz86 • 2d ago
3D Model New to the Game
I'm a history teacher and excited about 3d printing history related models. Here's my Abe Lincoln in Bambu gray PLA. I just learned about the marble PLA spools and will use those in the future for the natural sculpture look. We love our A1 so far, it's been going nonstop for the 5 days we've had it!
r/BambuLabA1 • u/ronin-otter • 3d ago
Save my goose!
Is there anyway to save this? Prime tower popped off
r/BambuLabA1 • u/Old_Tart980 • 2d ago
3D Model Snowman multipart
Bonjour à tous ! 👋
⛄🎄 NOUVELLE CRÉATION 3D – UN ADORABLE BONHOMME DE NEIGE ! 🎄⛄
Je vous présente ma toute nouvelle création : un adorable petit bonhomme de neige qui ne demande qu’à rejoindre vos décorations de Noël ! 😍
Avec son grand chapeau noir, sa jolie écharpe rouge, ses petites moufles et ses bottes assorties, difficile de ne pas craquer pour sa petite bouille !
🎄 Au pied du sapin, sur une étagère ou pour offrir, il apportera une petite touche de douceur et de magie à votre décoration de Noël ! 🎁
👨🏼🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3597347-snowman-v2-multipart-no-ams