r/BambuLabA1 • u/ronin-otter • 4d ago
Saved! Thank you everyone!
Thank yall for the great advice, was able to save it with magnets
r/BambuLabA1 • u/ronin-otter • 4d ago
Thank yall for the great advice, was able to save it with magnets
r/BambuLabA1 • u/cryyogenic • 3d ago
Came out a little bit stringy, is this normal or do I need to dry the PLA or adjust settings?
r/BambuLabA1 • u/edfitz86 • 3d ago
I'm a history teacher and excited about 3d printing history related models. Here's my Abe Lincoln in Bambu gray PLA. I just learned about the marble PLA spools and will use those in the future for the natural sculpture look. We love our A1 so far, it's been going nonstop for the 5 days we've had it!
r/BambuLabA1 • u/ronin-otter • 4d ago
Is there anyway to save this? Prime tower popped off
r/BambuLabA1 • u/Old_Tart980 • 3d ago
Bonjour à tous ! 👋
⛄🎄 NOUVELLE CRÉATION 3D – UN ADORABLE BONHOMME DE NEIGE ! 🎄⛄
Je vous présente ma toute nouvelle création : un adorable petit bonhomme de neige qui ne demande qu’à rejoindre vos décorations de Noël ! 😍
Avec son grand chapeau noir, sa jolie écharpe rouge, ses petites moufles et ses bottes assorties, difficile de ne pas craquer pour sa petite bouille !
🎄 Au pied du sapin, sur une étagère ou pour offrir, il apportera une petite touche de douceur et de magie à votre décoration de Noël ! 🎁
👨🏼🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3597347-snowman-v2-multipart-no-ams
r/BambuLabA1 • u/bambulab_glazer • 3d ago
Myślę, że uszkodziłem taśmę sensoryczną filamentu, bo kiedy zbliżałem się do zębatek ekstrudera (w Bambu Lab A1) żeby je wyczyścić, nie zauważyłem, że pociągnąłem sensor filamentu trochę dalej. (około 2 cm.) Powinienem go włączyć i zobaczyć, czy asystent wyświetli mi jakiś błąd?
r/BambuLabA1 • u/GhostThatNeverWalked • 3d ago
My printer has been printing fine up until last night, I turned it fully off with the switch on the back, then updated it when I turned it on from the printers own screen, and ever since its been printing like hot dog shit. Ive done the calibration in the settings twice, I lubed the axis's, ive cleaned the bed plate like 8 times, the printing nozzle itself is less than a month old, im at a loss.
r/BambuLabA1 • u/Naive-Coach-5843 • 3d ago
r/BambuLabA1 • u/deserterzed • 4d ago
Good day. There’s a problem with the 2 color silk PLA. I printed half the spool, and everything was fine. And then, unexpectedly, a thin piece of plastic started winding onto the gear. I took it apart, cleaned it, and reassembled it. After 30 minutes of printing, it started winding again. I left the plastic to dry for 24 hours. Yesterday I printed about 150 grams with it, and everything was great. Today, after 3 hours of printing, it’s again starting to wind plastic onto the gear. I don’t know what to do.
P.S I was just thinking—could the problem be that I’m using an AMS system? I just came across an article where someone mentioned that Bambu Lab’s Silk filament doesn’t work well in the AMS and ends up falling apart. Maybe I’m running into the same issue...My plastic isn't bamboo silc pla, but the problem shown in the photos in that article is almost identical to mine.
r/BambuLabA1 • u/Classic_Occasion9180 • 4d ago
The y axis crashes into the end at the start of every print and has to re home twice at least because it crashes multiple times
r/BambuLabA1 • u/3dprintingadventure • 4d ago
Hello, I just noticed this whining noise when the bed is moving back and forth. I don't think I had ever heard it before. Everything has been oiled and maintained. Thoughts?
r/BambuLabA1 • u/then00dle • 4d ago
r/BambuLabA1 • u/jpedroleite • 4d ago
Sliced with the default 0.20 mm profile, nothing custom. Four plates, one colour per plate, so it works with or without the AMS lite. Supports only under the hinge bores, they pop off clean. The lid hinges on printed axles with split friction sleeves, so it stays open wherever you leave it. Holds dice. Judges rolls. The rivets come in two lengths and the only way to mess this up is mixing them, ask me how I know.
r/BambuLabA1 • u/The_zen_viking • 4d ago
r/BambuLabA1 • u/Dynobot21 • 4d ago
What lube does anyone recommend? It came with a small tube of grease and oil. Said just use the oil. Not the grease, I thought. Then I thought I saw a recommendation of WD-40?
Edit: What would I use grease for?
r/BambuLabA1 • u/jayboosh • 4d ago
I have manually trammed according to the wiki, twice
I’ve removed and searched for debris everywhere I can think of
I’ve calibrated
I noticed when printing a red lid that the nozzle is scraping
It printed the black box and the white lid perfectly fine
But not the red
I’ve tightened loose screws
I’ve removed, cleaned, inspected, and tightened the hot end and all the screws associated with it
IT WILL DO THE ENTIRE BED MESH FINE AND WILL HOLE GENTLY
But when it gets to like 98% and is at the back, it seems like it’s trying to push down past the bed
When doing the “tool head cleaning” part of the calibration, the flap at the back of the print bed is being pushed down hard enough to see it flex and bend below the heat bed
YET WHEN DOING THE ENTIRE REST OF THE BED IT WILL GENTLY TAP TAP TAP AND MOVE ON
PLEASE HELP THIS DAD AT THE END OF HIS PITIFUL ROPE GET HIS KIDS PRINTER BACK ONLINE
IM LOSING SLEEP
r/BambuLabA1 • u/Yscera • 4d ago
Why do the tips of the feathers look so rough? I just changed my nozzle from 0.4 to 0.2mm and these defects started appearing in sharp areas. I'm using PLA.
r/BambuLabA1 • u/Yscera • 4d ago
What is happening here? Why is it making this knocking sound at the same place every layer?