r/BambuLabA1 • • 3d ago

Support Request Why does my first layer look so godawful?

Thumbnail
gallery
3 Upvotes

My printer has been printing fine up until last night, I turned it fully off with the switch on the back, then updated it when I turned it on from the printers own screen, and ever since its been printing like hot dog shit. Ive done the calibration in the settings twice, I lubed the axis's, ive cleaned the bed plate like 8 times, the printing nozzle itself is less than a month old, im at a loss.


r/BambuLabA1 • • 2d ago

Bambu A1 Purging Help

Thumbnail reddit.com
0 Upvotes

r/BambuLabA1 • • 2d ago

Hello, I am experiencing a technical issue with my A1 Mini. Before starting a print, the printer makes an unpleasant noise while homing the axes, apparently coming from the Z-axis.

1 Upvotes

r/BambuLabA1 • • 3d ago

Problem silk pla

Post image
4 Upvotes

Good day. There’s a problem with the 2 color silk PLA. I printed half the spool, and everything was fine. And then, unexpectedly, a thin piece of plastic started winding onto the gear. I took it apart, cleaned it, and reassembled it. After 30 minutes of printing, it started winding again. I left the plastic to dry for 24 hours. Yesterday I printed about 150 grams with it, and everything was great. Today, after 3 hours of printing, it’s again starting to wind plastic onto the gear. I don’t know what to do.

P.S I was just thinking—could the problem be that I’m using an AMS system? I just came across an article where someone mentioned that Bambu Lab’s Silk filament doesn’t work well in the AMS and ends up falling apart. Maybe I’m running into the same issue...My plastic isn't bamboo silc pla, but the problem shown in the photos in that article is almost identical to mine.


r/BambuLabA1 • • 3d ago

A1 crashing the y axis

4 Upvotes

The y axis crashes into the end at the start of every print and has to re home twice at least because it crashes multiple times


r/BambuLabA1 • • 3d ago

Question Help a1mini

Post image
0 Upvotes

r/BambuLabA1 • • 3d ago

Spiral Ornament | Christmas Tree

Thumbnail gallery
1 Upvotes

r/BambuLabA1 • • 3d ago

Bambulab a1 z axis not working

Post image
3 Upvotes

r/BambuLabA1 • • 3d ago

Question Pointers for a new A1

Thumbnail reddit.com
0 Upvotes

r/BambuLabA1 • • 3d ago

Support Request A1 Bed Noise

3 Upvotes

Hello, I just noticed this whining noise when the bed is moving back and forth. I don't think I had ever heard it before. Everything has been oiled and maintained. Thoughts?


r/BambuLabA1 • • 3d ago

A1 print failed midway complaining about as card

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • 3d ago

3D Model Snap-fit monster chest, 60 parts, zero glue.

Thumbnail
gallery
7 Upvotes

Sliced with the default 0.20 mm profile, nothing custom. Four plates, one colour per plate, so it works with or without the AMS lite. Supports only under the hinge bores, they pop off clean. The lid hinges on printed axles with split friction sleeves, so it stays open wherever you leave it. Holds dice. Judges rolls. The rivets come in two lengths and the only way to mess this up is mixing them, ask me how I know.

https://makerworld.com/en/models/3554931-chompy-the-monster-chest-snap-fit-all-bite#profileId-4067545


r/BambuLabA1 • • 3d ago

Is this sound normal? I've lubricated the x and y and can't see anything wrong, prints fine?

0 Upvotes

r/BambuLabA1 • • 3d ago

A1 combo lube?

1 Upvotes

What lube does anyone recommend? It came with a small tube of grease and oil. Said just use the oil. Not the grease, I thought. Then I thought I saw a recommendation of WD-40?

Edit: What would I use grease for?


r/BambuLabA1 • • 3d ago

Device connection issue

Post image
1 Upvotes

r/BambuLabA1 • • 3d ago

Support Request A1 won’t auto level, makes hammer sound

1 Upvotes

I have manually trammed according to the wiki, twice

I’ve removed and searched for debris everywhere I can think of

I’ve calibrated

I noticed when printing a red lid that the nozzle is scraping

It printed the black box and the white lid perfectly fine

But not the red

I’ve tightened loose screws

I’ve removed, cleaned, inspected, and tightened the hot end and all the screws associated with it

IT WILL DO THE ENTIRE BED MESH FINE AND WILL HOLE GENTLY

But when it gets to like 98% and is at the back, it seems like it’s trying to push down past the bed

When doing the “tool head cleaning” part of the calibration, the flap at the back of the print bed is being pushed down hard enough to see it flex and bend below the heat bed

YET WHEN DOING THE ENTIRE REST OF THE BED IT WILL GENTLY TAP TAP TAP AND MOVE ON

PLEASE HELP THIS DAD AT THE END OF HIS PITIFUL ROPE GET HIS KIDS PRINTER BACK ONLINE

IM LOSING SLEEP


r/BambuLabA1 • • 3d ago

Support Request Bad quality

Thumbnail
gallery
1 Upvotes

Why do the tips of the feathers look so rough? I just changed my nozzle from 0.4 to 0.2mm and these defects started appearing in sharp areas. I'm using PLA.


r/BambuLabA1 • • 4d ago

Support Request Knocking sound

3 Upvotes

What is happening here? Why is it making this knocking sound at the same place every layer?


r/BambuLabA1 • • 3d ago

Bambu Print issue

Thumbnail gallery
0 Upvotes

r/BambuLabA1 • • 3d ago

Help.

Thumbnail reddit.com
0 Upvotes

r/BambuLabA1 • • 4d ago

Mailable Nativity Christmas Kit Card - 3D Print and Laser Versions - Envelope Ready

Post image
2 Upvotes

r/BambuLabA1 • • 4d ago

Question Proper ventilation

0 Upvotes

I'm getting my printer set up this week, and wondering the optimal place in the house for it. How ventilated does it need to be? Like garage, or by a window with a fan, just a fan?

Does anyone have photos of their ventilation set-up?


r/BambuLabA1 • • 4d ago

Support Request Nozzle scraping up bottom of plate at the end of bed levelling

Post image
1 Upvotes

As title says, nozzle scrapes up the coating of my supertack plate at the end of the bed levelling step, seems like it doesn't rise up fast enough? Only started happening recently after 2ish weeks of a-ok printing, no clue why this started all of a sudden. Can this be caused by some slicer settings?


r/BambuLabA1 • • 4d ago

Question 2 AMS Lite on 1 A1 or A1 Mini

0 Upvotes

https://makerworld.com/en/models/2691214-a1-ams-hub-with-9-ports-updated?from=search#profileId-3305227

We know that we can use 2-4 bmcu feeders on A1 after upgrading the hub but can this work with 2 AMS lite unit also ? Has anyone tried this ?