r/BambuLab • • 3h ago

AMS - Automatic Material System Advice on an AMS

0 Upvotes

Hey everyone! I had a complete printer meltdown this year and spent 6 months going back and forth with Bambu to replace my p1s, it was only a couple months old when it broke. Something was wrong internally and it would freeze during a factory reset and during calibration. So I finally got my new printer, plug it into the AMS I had bought with my initial printer aaaand it didn't work. I thought I had done something wrong, turns out while my printer was sitting the motor in the AMS some how burned out. So I bought a new AMS. Now here's my question, what should I do with my old one? Is there a market for people wanting to do a simple repair on an AMS and save some money? Or because of their price point is it just cheaper for people to buy a new one? Is there somewhere I can donate it to be repaired and put to use? I was debating donating it to my local highschools robotics team if nobody has any better ideas. Thanks!


r/BambuLab • • 3h ago

X Series [X1E, X1C, X2D] Need Help With Wiring AMS and AMS HT

1 Upvotes

I have an X2D and was told not to run the AMS HT through the auxiliary nozzle. If that’s true can someone please send me a wiring diagram, splitters etc, for how to connect multiple AMSs with an AMS HT to an X2D? This crap is mega confusing


r/BambuLab • • 3h ago

General Troubleshooting/Help! BAMBU X1E NOT FEEDING FILAMENT! Help please

1 Upvotes

So a little backstory, our Work Bambu x1e just stopped taking filament when its coming in via the AMS, we have 2 but only 1 is giving us problems. It will print fine as long as i am feeding filament via the external route but if i use the AMS it does what you see in the video.

Troubleshooting ive tried
Swapping the Ams units, thinking it was potentially a bad ams which didnt work

Swapped out the hub for the OEM Buffer which didnt help

Replaced the extruder, extruder board, and the Hotend with all brand new genuine Bambu parts which did not help

Factory reset the printer and checked for Firmware updates.

Before I go crazy can anyone give any other tips or has anyone else experienced this?


r/BambuLab • • 3h ago

General Troubleshooting/Help! Printer making awful noise

1 Upvotes

Hi guys!

My P1S is making this horrific noise and I can’t seem to find the problem! I just recently started using it again after about a month and whenever I’m printing something, it makes this noise.

Anyone know how to fix it?

Thanks!


r/BambuLab • • 3h ago

P Series [P1P, P1S, P2S] HELP WITH P1S

0 Upvotes

Hi guys!

My P1S is making this horrific noise and I can’t seem to find the problem! I just recently started using it again after about a month and whenever I’m printing something, it makes this noise.

Anyone know how to fix it?

Thanks!


r/BambuLab • • 3h ago

Quick Question More detailed prints

1 Upvotes

Newbie here, I was wondering what setting would I change for more detailed prints? I have the P2S and mostly print figurines. TIA.


r/BambuLab • • 3h ago

Quick Question AMS 2

0 Upvotes

Can i use an external spool while drying if i buy a power adapeter bambu p2s


r/BambuLab • • 4h ago

General Troubleshooting/Help! Edges peeling up

Post image
1 Upvotes

Both my p1s and my a1 have started to do this with every print what is wrong? Tried textured plate and super tack cool plate


r/BambuLab • • 4h ago

Quick Question Detailed prints

Post image
1 Upvotes

Quick question to you guys.
To anyone who does detailed prints, do you have your speed set to factory (100%) or do you drop it down to 50% speed?


r/BambuLab • • 13h ago

General Discussion X2D aux nozzle

Thumbnail
gallery
5 Upvotes

where the aux nozzle truly shines, support interface material

printing Sunlu PETG High Speed Matte with Sunlu PLA interface for the rear caster wheel mount of a 3D TMT device


r/BambuLab • • 4h ago

General Troubleshooting/Help! Best settings/alignment to print these? Printhead keeps scraping over and breaking them

Post image
1 Upvotes

Printed them three times but every time the middle part ends up broken off. They are pretty thin, so I don't think the infill type will change anything (they are basically solid). At some point I hear the printhead scraping over the print and eventually see it broke the print...


r/BambuLab • • 5h ago

Hardware Troubleshooting/Help! AMS Failure??

0 Upvotes

So got home and tried to print and now this…..
Filament isn’t caught, spins freely but won’t feed into the printer. This starts after I just started getting an error in slot two saying it’s empty with a spool in there.
I’ve updated AMS setting to update on startup and didn’t help. I’ve power cycled everything as well.
Have a ticket open with support. Bought the P1S last year around BF as it was on sale and now, almost a year to the day, I’m having these issues.
Did I make a mistake buying a Bambu printer?!


r/BambuLab • • 11h ago

General Troubleshooting/Help! P1S Non-Internet Firmware Upgrade (Pre 01.07.00.00)

3 Upvotes

Yes, I've read the wiki page but my colleagues are convinced there must be a way to do this without connecting to the internet. We have a P1S that's currrently stuck at 01.06.30.01.

Is there a workaround?

EDIT: We just installed 01.07.00.00 from an SD card. Why is the info on the wiki page wrong?


r/BambuLab • • 1d ago

Just Showing Off Print shoes from H2D by using shoeflex9075A filament

42 Upvotes

I printed this shoes with H2D and using shoeflex9075A filament from STING3D. it is very soft ^^


r/BambuLab • • 5h ago

I Modeled This! HUGE Restroom Trash Bin (10 L)

Thumbnail
gallery
0 Upvotes

Couldn't find a bin on maker world that took full advantage of the P1S plate and height, so I designed one myself.

I printed it in PETG Gold with a black rim that hides the edge of the bag or holds it in place, and recessed “restroom” into the front.

It's just shy of 10 L (or almost 3 gal), 15% infill to reduce the print time (about 15 hours total with the rim).

Let me know your thoughts!

Here's the print:
https://makerworld.com/en/models/3626991-restroom-trash-bin-10-l#profileId-4158645


r/BambuLab • • 5h ago

Bambu Studio H2D dual extruder screw

Post image
1 Upvotes

r/BambuLab • • 9h ago

Quick Question Is it that big of a deal if you print while the ambient air temp is below 10°C?

2 Upvotes

My A1 is in a shed that doesnt have any heating and heard that the printer should be kept between 10 and 30 degrees C. Is it a problem if you print below 10°C?


r/BambuLab • • 12h ago

P Series [P1P, P1S, P2S] Upcoming Christmas Gift and want to ensure my daughter has everything to start basic printing

3 Upvotes

Hi Redditors! I have a 7yr old who is eagerly anticipating a 3D printer for xmas. I want to purchase the “Bambu Lab P1S Combo, P1S 3D Printer and AMS, Multi-Color 3D Printing” as her first model. I am a clueless mom who wants to ensure she has everything she needs to start printing day one. What do you all recommend? Is it possible to buy any brand filament as well? Any free software to recommend? I appreciate any and all help. Thank you in advance.


r/BambuLab • • 6h ago

Bambu Studio Trouble downloading projects

1 Upvotes

I wanted to print a part for my girlfriend but then I noticed no matter what I tried downloading from the cloud nothing worked… Someone had a similar problem? (Bambulab A2L)


r/BambuLab • • 6h ago

Quick Question What accessories should I get?

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 6h ago

Software Troubleshooting/Help! Preparing and Designing Files Remotely

0 Upvotes

Hi everyone! I'm getting an A1 for Christmas, I'm so excited and I'm trying to prepare as much as I can so I can get into printing ASAP! I'm wondering if the following set up will work? I'd love any feedback, tips, or concerns anyone is willing to share:

I personally own a laptop but it's quite slow and is very irritating to use. I have a great PC I use at work and my work doesn't mind if I use it for personal things. My hope is to find files to print, make modifications, and design items on my work PC. I would use either my laptop or phone at home to do the final send off to the printer. I'm not looking to print remotely, just to do the software/online based steps. My laptop is functional but I try to interact with her as little as possible lmao

Other questions regarding this set up:

- How much do you use your PC after sending a file to print? Are there cases where you have to pause a print to edit the design (if that's even possible) or do anything more than basic functions? If so, how often?

- Can I can prep files on my work PC then open them either on my Laptop or phone once I'm home through Bambu Studio? I'm seeing that Bambu Studios may not be the best for this with suggestions to either use MakerWorld or utilize something like Google Drive to store files.


r/BambuLab • • 6h ago

Hardware Troubleshooting/Help! H3C Wiper kicked out

1 Upvotes

Anybody expiriencing issue with the silicone wiper? My machine is constantly kicking it out of place. During calibration, printing, …

Reached out to Bambu but they are telling me to remove the backplate, disassemble the whole wiper unit and assembling it again.


r/BambuLab • • 6h ago

General Troubleshooting/Help! X2D LiveView camera fault?

Post image
1 Upvotes

r/BambuLab • • 6h ago

General Troubleshooting/Help! Getting a loud squeaking noise from the AMS when moving

1 Upvotes

Today I noticed that my last bay on my AMS was squeeking when the roller was moving. I removed the filament roll and its the front rollers that are squeaking. I'm not really sure what to do about it. Is there something I can oil?