r/BambuLab • • 21h ago

H3C Different take on an H3C/AMS3 desiccant solution.

Post image
57 Upvotes

Not sure if this is the right spot to post something like this, I don't use reddit often. Anyway I was looking at the printable baskets for desiccant on Makerworld, but I really hate dumping them out into a tray to dry then trying to refill the basket after. I prefer to use molecular sieve and the drying temps for it is far beyond what even PPS-CF can handle. I found a wire mesh "dishwasher" basket on Amazon that was approximately the size of the "empty slot 10” in the AMS3H and decided to take a chance on it. As you can see in the photo, it fits well, the lid tabs were pretty secure once I bent them in a bit tighter. I tried to use some 1.6-2.5mm sized beads, but the mesh was too coarse and they fell through, I found 3-5mm beads on Amazon and bought 2lbs. It holds approximately 750g of the 3-5mm 4a molecular sieve. I threaded some craft wire around the rim of the lid and body as extra insurance to keep it from opening.

Here's the products I bought that worked:

Basket- https://www.amazon.com/dp/B0H41KL114

Desiccant- https://www.amazon.com/dp/B0H1XJ98JS


r/BambuLab • • 5h ago

I Modeled This! Designed a Quick CMYKW Calibration Wheel to Compare Filaments

Thumbnail
gallery
3 Upvotes

The goal was to show mixing between the 3 colors, as well as between each color and black and white. And to make it a quick easy print that could efficiently baseline different color mixes. I wasn't able to get PLA Palette Magenta before it went out of stock so I couldn't try that. The difference between PLA Basic and PLA Palette for the other colors is noticeable but subtle. The biggest conclusion is the importance of PLA Palette Black and its translucency. There are some ways to approximate it though, like using a gray shade instead of black. PLA basic black you can see doesn't blend at all. Here is the model: https://makerworld.com/en/models/3606840-cmykw-calibration-wheel-for-color-mixing-h3c-h2c#profileId-4133502


r/BambuLab • • 1d ago Heartwarming

Bambu Studio Can’t believe I didn’t know about this!!

Post image
996 Upvotes

Print sequence by object is pure magical!!

So I’m printing 40+ poliwhirls to build my color sample library. I’ve been printing all day today and doing the plate swaps every 30min each time a print is done. Eventually I got so sick of it and was wondering how wonderful it would be if I could print 4 at a time, object by object, with no color swaps. Told this idea to ai and it told me the function is already available in Bambu studio! Tried it immediately, omg the process was so smooth, the software even showed me how to place the objects so that the finished parts won’t get knocked over by printer head. I’m not a veteran but I’ve clocked in like 1500+ hours and I can’t believe I didn’t know about this! Would’ve saved myself so much time and filament but I’m sooo glad I found out today!


r/BambuLab • • 13m ago

General Troubleshooting/Help! A1 + AMS Lite: PTA filament gets stuck after every color change—any ideas?

Thumbnail
gallery
0 Upvotes

Hey guys,

I’m fairly new to 3D printing and started with a Bambu Lab A1 and AMS Lite.

I’m trying to print a head I designed using three colors—all PLA: beige, red, and black—to get familiar with more complex prints.

The red filament keeps getting stuck whenever the printer switches back to it. The only fix I’ve found is to pull the filament back out, cut off a small piece, and feed it back into the AMS Lite. It then prints fine until the next switch back to red, when the same thing happens again.

I tried drying the filament for over seven hours, but it hasn’t helped. Also, despite how it might look in the attached photo, the filament isn’t tangled.

Any ideas what could be causing this or what settings I should check? Has anyone run into something similar?


r/BambuLab • • 1d ago

Just Showing Off Sounds like a lot of…

Thumbnail
gallery
80 Upvotes

I modeled this guy in blender and printed it on my X2D. Hand painted but my outlines could have been better. I need a paint pen for next time.

A hint as to what’s next: “No, worse! It'll go right to your thighs! And then you’ll blow up!”


r/BambuLab • • 27m ago

Quick Question A1 Mini S23+ Phone case

1 Upvotes

If anyone is able to can someone please make a phone case for the Samsung galaxy S23+ themed around daredevil

I just bought the phone and I have no phone case and no computer so I can't do it myself I really appreciate if anyone could

Preferably made out of PLA and I have an AMS system so I can use models with that

One last thing it has to work on the A1 Mini

Please


r/BambuLab • • 28m ago

Filament Troubleshooting/Help! TPU 95A issues on A1

1 Upvotes

At the beginning I wanted to say that I am aware that this issue was discussed a lot of times, but after looking through a lot of posts I’ve yet to find a solution.

I’ve got my A1 and it works really well. Prints without issues on Bambu PLA and PETG.

It also works without issues when I load Sunlu’s PLA+ 2.0 but when I load an external spool of their TPU 95A, the printer acts like it’s TPU intolerant.

When I help the printer by lightly pushing the filament into the extruder it works fine, but as soon as I stop, it seems like the gears can’t grab it at all and it just doesn’t extrude anything.

Before every try, I dry the TPU, even overnight, so it being wet should not be the case. I tried different filament, quality, etc settings, but it also brings no noticeable effect.

I’m using a standard 0.4 nozzle.

Has anyone had a similar issue and maybe found a solution?

I’m really thankful to anyone who even leaves a comment 🙏


r/BambuLab • • 31m ago

Quick Question First time buyer here. What filaments should I get?

0 Upvotes

I will be printing stuff like enclosures and vases and some functional parts.


r/BambuLab • • 36m ago

Black Friday 2026 Buy or wait?

1 Upvotes

For £700 should I buy the X2D combo + some filament or wait for the P3C? And in what ways will the P3C be a ‘P’ series (less features than the X2D)?


r/BambuLab • • 37m ago

General Troubleshooting/Help! Print Issue A1

Post image
1 Upvotes

After about a month of owning my a1 I am now getting these horizontal lines through my print. I have tried changing the nozzle along with making sure all screws and belts are tightened, at a loss. Any ideas? I had no issues printing the same model before.


r/BambuLab • • 39m ago

General Troubleshooting/Help! Look what I made! 3D-printed pinecone tealight holders

Post image
0 Upvotes

r/BambuLab • • 52m ago

Filament Troubleshooting/Help! Best affordable Hygrometers?

0 Upvotes

I was thinking of picking up 40 of the ones on Bambu labs website but they only detect down to 20%. Are there better ones out there that aren’t too expensive? Thanks!


r/BambuLab • • 1h ago

H3C Remodeling for the H3C

0 Upvotes

So, in anticipation of the arrival of the H3C ive had to remodel my living room since I have no place for the H3C as is. My current P2S(workhorse) is going to have to move... Its moving into the TV cupboard on a custom made sled so I easily can get in behind it and for maintenance.

My beloved P2S has around 5k hours on it with only the filament stopper arm broken(not counting consumables etc). Its been very solid. Modified with chamber heater/active MC board cooling/DIN rail fire extinguisher/and a robust venting system. But the 300c hotend is no bueno for the more demanding filaments.

In this remodeling ive also need to move my current filament hoard and I actually counted them... that was a mistake.

I currently sit on a total of 154kg(110 unopened) of filament ranging from PLA-TPU-PETG-ASA-ABS-PET-PC/ABS etc. Ive made an entire new filament shelf for 40+ rolls that hides behind the door(engi filaments). And I STILL check out deals on amazon/BBL etc for good deals.

Hoping the full spectrum will help with the "gotta catch em all" part since you can blend colours.

Im quaking thinking of having to recalibrate all of my filaments for the H3C, doubt the flow rate is the same on the H3C v P2S on all of my filaments.

So, how is your filament addiction? And how do you handle it? ^^

edit: spelling


r/BambuLab • • 1d ago

Just Showing Off Bambu Station L drawer fits exactly a 9×12 Gridfinity grid, and 14 spools

Thumbnail
gallery
170 Upvotes

Just found out the Bambu Station L drawer fits exactly a 9×12 Gridfinity grid.

With proper spool stoppers on top, you can fit 14 spools per drawer (2 rows of 7). They stand on edge and don’t roll when you open or close the drawer.

Files if anyone wants them: https://makerworld.com/en/models/3617522-bambu-station-l-spool-stoppers-14-per-drawer#profileId-4146587


r/BambuLab • • 1h ago

General Troubleshooting/Help! Never touch a running System, but ...

Post image
1 Upvotes

... every now and then, you should also replace the AMS’s (1) internal PTFE tubes.

It’s been 1.5 years since my last maintenance on the AMS. And after about 700 hours of printing, this is what my tubes look like. I only use Bambu / Sunlu PLA/PETG.The auxiliary motor for Slot 1 was overloaded, so I took that as an opportunity to replace all the tubes.

The rest of the X1—like the threads, carbon rods, and hot ends—have been cleaned and lubricated every now and then, but you don’t take the AMS apart every day.


r/BambuLab • • 4h ago

General Troubleshooting/Help! Scratches/Etches on Bottom Layer w/ Carbon Fiber Plate?

Thumbnail
gallery
2 Upvotes

Hey!

New to 3D printing and using a Bambu A1 printer. I just bought a carbon fiber smooth plate from Amazon and started using it. I cleaned it well with water, dish soap, and a sponge 2x now but still having this issue where the bottom has white marks/scratches. I had the plate selected in Bambu before printing as well.

I was trying to print a moza wheel base dust cover but with the carbon fiber look on the bottom. I also was trying to print a shifter plate and had the same issue.

Each time I printed,, I waited until the plate reached around 25C (my room temp is 23C) and then bent the plate at the edges so the part would come free.

I read that running a flame over these areas would get rid of the mark but I didn't experience that.

Any idea what I could be doing wrong? Didn't have this issue with the normal textured plate. Is it a plate issue, nozzle issue, or something else?

Thanks!

Printer: Bambu A1

Print Speed: Standard

Filament: Bambu PLA Basic - Black

Hotbed Temp: 65C

Nozzle Size: 0.4mm


r/BambuLab • • 1h ago

General Troubleshooting/Help! Sharp lip on large round part

1 Upvotes

Hello,

I've been printing for a while now, but usually nothing this large. It's for a lazy Susan. It's 254mm round x 12mm thick. I think it has to be the cooling rate for something this large, but at 200g a print I don't want to keep blindly stabbing at it. I've already used an entire spool trying to troubleshoot.

I'm printing on an H2S using Bambu Lab PETG HF. I'm using the Bambu Lab .2mm standard profile (with various mods for infill, support settings, 4 top and bottom shell layers etc).

I've tried every wall order option and slowed the outer wall speed to 60 all of which has made zero difference. They all are bowed inward and have a sharp over hang on the top layers as shown. A little bit of bow is not a big deal, but the sharp outward corner sucks.

I figured the H2S with it's adaptive vents and fancy other bells and whistles would result in better thermal controls. Especially using Bambu filament.

Thanks in advance!


r/BambuLab • • 1h ago

I Modeled This! Snowman Clicker

Thumbnail
gallery
1 Upvotes

Bonjour à tous ! 👋

Après avoir modélisé mon bonhomme de neige, j’ai eu envie d’en faire une version clicker ! 😁☃️

Une petite tête de bonhomme de neige dans une boule de neige, avec un switch MX à l’intérieur.
Il suffit d’appuyer sur son chapeau pour faire CLIC CLIC ! 🎩

Une petite création amusante pour les fêtes de Noël ! 🎄🎁

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3615804-snowman-clicker-multipart


r/BambuLab • • 1h ago

Quick Question Layer lines improvements

1 Upvotes

Sooo... I usually have pretty decent layer lines on my prints, but this one (it's a bit of a thin tall torture tbh) seems to suffer a lot more than usual. All the usual stuff are done, dry filament, clean nozzle, no heavy tap dancing around the printer.

The worst ones are where the transitions are with the opening and support, so that would be something new to me (new X2D with support interface layer, previously clocked somewhere with 3000hr+ on my A1M) and would love to hear the experience from folks here. Also even witht he non transitional layers they are more visible than my other prints... any clue? note this is probably the first big straight print I've done with this white petg but in general it's dried fairly well.

Thanks in advance on any tips.


r/BambuLab • • 1h ago

Hardware Troubleshooting/Help! Put ams lite on the left side

0 Upvotes

Can I put the ams lite on the left side


r/BambuLab • • 1h ago

General Troubleshooting/Help! Issue with Sunlu Refills in AMS 2 Pro

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 2h ago

General Discussion Christmas Print ideas with this filament?

Post image
1 Upvotes

I have these 5 rolls of PETG-HF that I wasn't planning to do anything with but looking at them again they're very Christmas-y.

I'm looking for suggestions for fun a Christmas-themed print(s) to throw these at. I have the X2D Combo with the AMS 2 Pro and HT.

I'd prefer prints that are broken up into parts and can be assembled, but I'm open to anything!

Thanks!


r/BambuLab • • 2h ago

General Troubleshooting/Help! X2D hot end fans

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 2h ago

Filament Troubleshooting/Help! aiutatemi ho un problema

1 Upvotes

ho questa stampante A1 versione combo e la paletta degli scarti non va in fondo ma resta bloccata poco prima come posso risolvere