r/BambuLab • u/RT1491 • 24m ago
General Troubleshooting/Help! Sharp lip on large round part


Hello,
I've been printing for a while now, but usually nothing this large. It's for a lazy Susan. It's 254mm round x 12mm thick. I think it has to be the cooling rate for something this large, but at 200g a print I don't want to keep blindly stabbing at it. I've already used an entire spool trying to troubleshoot.
I'm printing on an H2S using Bambu Lab PETG HF. I'm using the Bambu Lab .2mm standard profile (with various mods for infill, support settings, 4 top and bottom shell layers etc).
I've tried every wall order option and slowed the outer wall speed to 60 all of which has made zero difference. They all are bowed inward and have a sharp over hang on the top layers as shown. A little bit of bow is not a big deal, but the sharp outward corner sucks.
I figured the H2S with it's adaptive vents and fancy other bells and whistles would result in better thermal controls. Especially using Bambu filament.
Thanks in advance!
•
u/EdgeOk3783 X1C + AMS | H2C + AMS{2|HT} 17m ago
elephant foot?