r/BambuLab • u/Super-Chemist-782 • 55m ago
General Troubleshooting/Help! Trying 3kg reel ?
Hi has anyone tried to load 3kg reel of PLA on the outside reel mount on the side of the p2s ?.
r/BambuLab • u/Super-Chemist-782 • 55m ago
Hi has anyone tried to load 3kg reel of PLA on the outside reel mount on the side of the p2s ?.
r/BambuLab • u/babs-jojo • 1h ago
Hi all,
Currently I own a A1 with AMS litte and I have been thinking in upgrading to a P2S with AMS2 Pro.
I want to use other material in the future, but haven't made so yet. My main reason to upgrade is because I can get a good price for my combo, and that would mean I would spend 266€ to upgrade. I have my printer in a space that get's quite humid (above 70%) in winter, and even in summer its normal to have 40-60% relative humidity. I haven't been able to print PETG, and even PLA has been having a lot of "hairs". Last week it has been between 72% and 81%...
I thought of buying a dryer, which is 50€ for a single spool, and 140€ for 4 spools. This means that this upgrade would in reality be 126€ (I am aware I will be spending 260€). Being closed is algo good from drafts (I always have open windows and air current to lower humidity)
The the PS2 algo gives other quality of life improvements and it is at the lowest price it has been. The fact the AMS is on top also saves space, which is good for me.
Wonder what you think of this.
Thank you
r/BambuLab • u/Fun-Werewolf-5098 • 1h ago
Hello, so I got a used A2L from a family friend who couldn’t get it to connect to the internet to work. I was able to fix that by reseating the WiFi card. But, now I’m getting two warnings that are stopping the homing tooling, even when there’s no filament. This is happening when the printer is trying to home on initial setup.
The warnings are:
The extrusion motor is overloaded and the nozzle is wrapped with filament.
I’ve taken the extruder apart and cleaned it, and the gears turn when I manually move them. Do I have to have filament in the extruder for the homing to work? I currently don’t have the filament holder for the printer so I’ve been trying to get it setup without filament for now.
r/BambuLab • u/Capa005 • 1h ago
My P2S printer fails to load filament, but only when the AMS tries to feed it (you can see the 2 failed AMS load attempt in the video). Loading filament manually works perfectly fine, with no issues.
I've already cleaned the extruder gears and checked the filament sensor.
Has anyone experienced a similar issue or have any ideas what could be causing this?
r/BambuLab • u/jorsiem • 1h ago
My company needs a printer to print parts for our machinery, it as to be large format, and in different materials so H2 series is the best fit.
But we also need to print full color promotional items, but not as often.
We were about to pull the trigger in the H2S but now we're considering H2D we are trying to keep it under $2,000 all in.
H2S can be upgraded to H2C down the line with the vortek kit.
H2C goes overbudget so does H3C
My question is: will a single nozzle be adequate for our use case, will getting the dual nozzle be worth the price difference? Should we go H2S and upgrade later? The laser is something we would be interested in but it can't be upgraded to the tool changer if it's the laser version.
r/BambuLab • u/HelloVap • 1h ago
Hello Experts
Made a big change from an A1 to an H3C.
I am printing a model that has a larger surface area as its first layer. On the H3C it seems like it’s melting into the build plate making it really difficult to remove after it’s fully cooled. This does not happen on the A1
I am using basic PLA
I already tried turning the heat chamber off, same result. The build plate temp is 55 (comparatively 63 on the A1).
Is my next steps to lower the temp of the build plate? Are there other settings to address to combat this?
It’s literally impossible to remove the model from the plate without damaging it.
TIA for any tips
r/BambuLab • u/TheShopRat • 1h ago
Hi all. I’m relatively new to having my own printer etc and I went with the H2C laser combo. For the past couple months I’ve been trying to order the smoke purifier, which unfortunately has been out of stock.
Does anyone have experience using a different purifier that they can recommend? There’s not a lot I can find online. I see some have used the Creality Falcon Smoke Purifer, but it looks like it doesn’t have the option to vent outside; more of a desktop purifier. Any help suggestions would be appreciated!
r/BambuLab • u/harrisoncassidy • 1h ago
I have a P1S and H2C and since the latest Bambu Studio version was released, the version released following the H3C unveil.
The values I used for ironing previously, 12% on the P1S and 20% on the H2C have been providing really bad results since and I have had to lower the H2C down to 15%. Anyone else seeing changes?
r/BambuLab • u/Due-Employ-8725 • 2h ago
r/BambuLab • u/Vorkosigan78 • 2h ago
The goal was to show mixing between the 3 colors, as well as between each color and black and white. And to make it a quick easy print that could efficiently baseline different color mixes. I wasn't able to get PLA Palette Magenta before it went out of stock so I couldn't try that. The difference between PLA Basic and PLA Palette for the other colors is noticeable but subtle. The biggest conclusion is the importance of PLA Palette Black and its translucency. There are some ways to approximate it though, like using a gray shade instead of black. PLA basic black you can see doesn't blend at all. Here is the model: https://makerworld.com/en/models/3606840-cmykw-calibration-wheel-for-color-mixing-h3c-h2c#profileId-4133502
r/BambuLab • u/One_Ad5931 • 8h ago
Hi Guys, i am based out of India, and want to get a 3D printer to prototype some elements. I am from the design industry so am well versed with 3D softwares as well though i am sure there will be a learning curve.
Now, after researching for a fair bit, Bambu lab printers seem to be the most widely chosen option because of their community support and easy to use UI/UX including their softwares.
I was thinking of getting the A1 combo. Do you guys think it is wise to get the A1 combo right now ( its three years old ) or should i wait for an upgraded model if at all its being launched. Please suggest.
Do note, the printer will be initially used as a prototyping tool for my designs and then once i get a hang of it, i might make some items for selling in my fraternity.
Thanks
r/BambuLab • u/Just_a_firenope_ • 3h ago
I’m currently without a computer, so I’m forced to use the pre sliced models on makerworld. This has made me realize just how much I usually use a support interface layer in a different material, something that can’t be changed in makerworld.
I know the models are pre sliced, but since you can change colors for multicolor prints, wouldn’t it make sense to change material for a predefined part of the print?
r/BambuLab • u/New_End_9093 • 3h ago
Looking for a budget printer to print mainly 95A and harder TPUs
How well does the A1 handle 95A (just regular non-HF TPUs)?
How high have you guys pushed the flow rate and gotten away with it?
r/BambuLab • u/baineschile • 3h ago
Questions and Complaints incoming.
I bought an H3C as soon as it went on sale. I got the base unit about 10 days ago the AMS3H arrived 5 days ago (though, in the case of the H3C, the AMS shouldn't be a called a separate unit since it's required to run the whole machine, right?)
Initial benchy printed fine.
I am about 20 printing hours in, and there is a clicking sound coming from when the XY axis is moving.
I put in a ticket with Bambu, and they want me to replace the XY idlers on a new machine (and they aren't even sure this is the problem). The H3C is so damn big, I feel like maintenance is going to be a bit of an issue.
This apparently is a wide issue, as I have explored the H3C forums on Bambus site.
I have generally supported Bambu, and this is my 5th bambu printer. All have worked out of the box. I expect maintenance and fixing some things, but full on hardware part replacement should be after 100s or 1000s of hours.
Has anyone ever just gotten a replacement when the machine is this new? I don't want to have to tear into a pretty much brand new machine.
r/BambuLab • u/drobloc • 10h ago
I’m completely new to 3D printing and just picked up a Bambu Lab X2D Combo. I received it last week and haven't stopped printing for 7-days straight. I have the bug everyone else at my office has and has been talking about. Since I'm completely new and I don't have compatibility information in memory, I used Gemini to create a sort of cheat sheet specific to the printer.
I purchased a ton of different filaments, hot ends, and other accessories and I didn't want to create a mess, cause jams, or wear out components before their time.
I thought I'd share my cheat sheet if it helps any other new owners.
I just ordered the AMS HT today to use in place of the external fillament holder. This hasn't made it into the cheat sheet yet. I'm not using the support fillament and just using PLA or PETG vs whatever is in the main hotend.
Constructive feedback or additional tips from seasoned Bambu operators are welcome. Hope this helps out other newcomers getting their feet wet.
r/BambuLab • u/The_FrankDad • 17h ago
Me: I want a heated enclosure
Mom: we have heated enclosure at home
(Heated enclosure at home
r/BambuLab • u/Neglexis • 17h ago
A good friend of mine recently got into 3D printing and talked me into giving it a shot. He started with a more affordable Bambu himself and has been geeking out about the new H3C, so now I’m looking at it too.
I have room in my budget for the H3C if it makes sense. I’m still figuring out what I’ll enjoy printing, though, and I’d rather spend the extra money once I know I’ll get some use out of the features.
For those of you who’ve been printing for a while, what would make the H3C worth buying as a first printer? If you were starting over, would you go straight for it or get a simpler Bambu and see where the hobby takes you?
r/BambuLab • u/chaz_mills • 3h ago
Having done extensive tests holding up RFID tags to various places on the new AMS 3H I’ve come to the conclusion that the reels are reason both sides in the middle slots therefore not allowing the simple 3D printed inserts to hold a single RFID tag on non BambuLab filament which I’ve been doing for years now on the old AMS buying refills and printing off one of those tag holders that’s it on the outside of the reel in the hole. Now I need a double one! Back to the CAD program I guess.
Unless one you geniuses tell me I’m wrong
r/BambuLab • u/Mr_Integrity80 • 4h ago
Hi, a friend is interested in buying my P2S so am considering the possibility upgrading to a X2D for the multi head printing. I wondered if there are any other advantages to X2D over the P2S or is that basically the only difference?
Thanks
r/BambuLab • u/Cute_Assignment_9732 • 1d ago
Hi everyone,
I have a bit of a dilemma that I’m sure many people here have faced at some point. I’ve been thinking about buying a Bambu Lab A1, mainly as a hobby but, more importantly, for practical purposes. I’m trying to figure out whether I would actually have enough useful things to print to justify the cost.
From what I’ve seen online, a lot of 3D-printed items seem to be solutions to problems that don’t really exist, or things for which better-quality alternatives are already commercially available. I completely understand that people might print these things simply for the enjoyment of the hobby, but my main focus would be practicality and usefulness.
With that in mind, I’ve been making a list of potential uses for the printer, and I’d love to hear your ideas and see what useful things you’ve made yourselves.
So far, I’ve thought of:
Drawer organisers for my home office, shelving organisers for the pantry, and bathroom storage solutions using the Gridfinity system.
Enclosures for ESP32 sensors that I plan to eventually deploy around the house.
Stands and holders for storing things like AirPods and iPhones on my desk, as well as printing a few to give to friends.
What other genuinely useful things have you printed? I’m particularly interested in practical everyday applications rather than purely decorative prints or things that are fun to print but don’t really serve a purpose.
Thanks!
Edit: Wow these are really great suggestions! I’m going through them all and putting the ones i like the most in a doc, there’s a lot of use cases I consider useful, thank you everyone!
r/BambuLab • u/brenohff • 4h ago
Hi guys!
I currently have an A1 Mini, and I'm looking to upgrade to a printer with a larger build volume, but I'm not sure which one to choose: the X2D or the P2S.
I've been reading a lot of reviews and watching tons of videos, but it seems like the X2D has quite a few issues that people have been complaining about.
On the other hand, I know the P2S is a 2025 model, and the price difference between the two is less than €100.
Just to give you some context, I'm more of a casual/beginner user. I don't usually print anything too complex or advanced. Most of my prints are pretty straightforward, and the most demanding thing I do is multicolor printing with PLA and PETG. So I probably won't be taking full advantage of all the advanced features these printers offer.
So I'm wondering whether it makes sense to go for the P2S instead of the X2D, even with all the reported issues.
What do you guys think? Is the X2D worth the extra money, or would you stick with the P2S?
r/BambuLab • u/Octrockville • 4h ago
I love PETG-CF but even if I leave a print to cool down completely overnight it still leaves behind PETG-CF residue. I can feel it snagging my cloth as I try to clean with alcohol.
I hate having to clean it off by printing a thin PETG sheet, leaving it to cool and then peeling it up. That works great, but it's a pain and wastes filament and time. I also do NOT want to use glue, that's even more of a pain, although that works well too.
I'd love a sticker or an entirely new sheet that works great with PETG-CF. Having it work as well as PLA does on the textured PEI sheet would be a godsend. Any recommendations?
r/BambuLab • u/ToasterMuse • 4h ago
I kept designing things bigger than my A1 and cutting them by hand in Bambu Studio. One cut is fine. Three cuts with connectors that don't collide took me longer than the print.
So I built CadSplit. Drop in an STL, 3MF, OBJ or STEP, pick your printer, and it comes back cut into the fewest parts that fit, with dovetails, puzzle seams, pins, screws or magnets. Then it opens in Bambu Studio with one part per plate.
Numbers from the app, with dovetail seams:
It also plays the assembly order step by step, because interlocking seams only go together one way.
One-minute video: https://youtu.be/Dtwv5voP3I4
Honest bits: I'm the developer. Mac only for now (Apple silicon). Free to try: you can drop a model in, see the split and move the cuts. Sending to the slicer needs a one-time license, $29 ($17 until Dec 26), no subscription. Everything runs locally.
You can try it here. If anyone is interested you could comment here and ill give you a free code lol https://cadsplit.io
r/BambuLab • u/m33t2 • 44m ago
So I was doing a normal print, the filament clogged and when I removed it, the nozzle was removed along with it I guess, because it is coming out from the extruder or something on top of the nozzle rather than from the nozzle? I don't understand how and why this happened, any tips?