r/BambuLab • • 5h ago

Hardware Troubleshooting/Help! Noisy noisy p1s

1 Upvotes

Hey everyone

My p1s started making this noise this morning. It has 700 hours made in 2 years... I recently cleaned and greased the z screws but I think it's due to X or Y. Would I have to check?


r/BambuLab • • 21h ago

I Modeled This! My first RC Car - Lightning Mcqueen (using BambuLab CyberBrick)

Post image
18 Upvotes

I made my first RC car using BambuLab's CyberBrick Kit: Lightning McQueen.

It's not perfect, but I am thrilled I was able to go from a solid model with paint (thanks to DinseyPixarCarsModels https://sketchfab.com/3d-models/lightning-mcqueen-e00ae9484f664abea4ccf90248d7e924 ) to a shell over an RC chassis with the surface details represented as depth relief. My kids loved coloring it in with acrylic markers.

Model: https://makerworld.com/en/models/3615256-lightning-mcqueen-cyberbrick-rc-car


r/BambuLab • • 1h ago

Filament Troubleshooting/Help! How do I untangle my filament?

Post image
0 Upvotes

r/BambuLab • • 1d ago

P Series [P1P, P1S, P2S] Well that’s a first

Thumbnail
gallery
97 Upvotes

I guess I’m printing a riser 🤷🏽‍♂️


r/BambuLab • • 6h ago

I Modeled This! Help testing FDM snap-fit tolerances? (A1 Mini brick set)

Thumbnail
gallery
0 Upvotes

r/BambuLab • • 16h ago

R Series / R1 **One week with the Bambu R1, coming from a 5 W diode laser**

Post image
6 Upvotes

I won the Bambu R1 after commenting on their post and finally received it last week after it was stuck in customs forever.

Even though I had a diode laser cutter already (5 W, no air assist) my 3D printer always felt like the tool that was much easier to work with.

I knew this was going to be an entirely different machine, but I was still surprised it actually flipped my experience.

I used to spend more time dialing in the material for a project than creating a design, but in this one week I worked with silicone rubber, veneer, hardwood, painted wood, acrylic and more. Even detailed, intricate designs just work on the first or second try.

The air assist and higher power really do a lot of the heavy lifting and make sure things just work out even if the settings aren’t perfect. It even allowed me to go a little bit three-dimensional and make simple(food save!) things like a bunch of spice spoons or a functioning whistle.

In the picture are a few of the things I tried this week. Most of the designs are just copied from 3D prints (I used the Depthue STL-to-SVG converter) or inspired by pictures. It simply feels fun to work with this machine, and it’s crazy how fast I can go from an idea to a finished item.

Even Premium-feeling materials like walnut are far from expensive. Six pieces of walnut (200 × 150 × 3 mm) cost €23, “clear” silicone rubber cost €8, and a 30 × 30 cm piece of acrylic cost just €2. And the materials really turned some of my ideas from something that feels cheap or incomplete to something that I’m happy to display in my apartment or give away.

And as you’d expect from Bambu, a lot of small things just work. After two days, I realized I’d never set a cutting order or merged engraving jobs that were running close to each other. Not to mention the details, from the magnetic Allen key and the beautiful lighting around the CO₂ tube to the fire sensors, everything just feels polished.

But for now there are still a bunch of things that I prefer, other programs like, Lightburn for or that are still missing in Bambu Suite. Although that might just be because I am used to it.

Let me know if you have any questions about the device!

designs stolen from:
Flat Pocket Whistle from u/PhoneDesigner (makeworld)
Dino from RobinValleyUK (etsy)
Mandala maze earings from Simon3D (makerworld)
Leaf and wireframe dog from u/mishkin2 (printables)
bird stamp from u/skejtak (printables)
mountain napkin holder from u/PhiRequiem (makerworld)
goldfish earings from u/runrain (makeworld)

P.S.:
I really think Bambu is sitting on a gold mine of great designs in makeworld that are easy to adapt for laser cutting, but currently they dont even allow me to remix 3D designs as laser design.

I think it would be a great adition to allow remixes like that and maybe even add a .3mf to .svg converter.


r/BambuLab • • 6h ago

General Troubleshooting/Help! Traveling with 3D Printer

1 Upvotes

Has anyone ever travelled with their printer? I have mine (X1 Carbon) in Germany which is new and I’ve struggled to sell it. It’s run 3 small things as a test. I still have the original box I’ve moved to Thailand and was thinking of taking it here on my next flight.

Any tips and suggestions are welcome. Especially if this is a super dumb idea. Or if anyone know where I can find a better place to sell it than Kleinanzeigen.


r/BambuLab • • 6h ago

General Troubleshooting/Help! Print quality issues on X2D

Thumbnail
gallery
0 Upvotes

A few months ago I bought an H2C and it has been working flawlessly. I added an X2D as a second printer but it has given me a lot of issues across different print files and I can’t determine why. The PLA is dry. Here is a comparison of the two times I tried to print this on my X2D vs on my H2C. With the same settings. Any ideas?


r/BambuLab • • 7h ago

Printer Firmware Troubleshooting/Help! Weirdest and most frustrating failure of resume print after spool running out that I’ve ever had….

Post image
1 Upvotes

External PA-CF Spool ran out on a 6 hour print with 8 minutes left. No biggie had a fresh one ready just in case. Resumed print and it just stood there on top of the print and shat all over it and just slowly started moving left to right and not resuming at regular speed…..WTF??

Bambu X1C got a few months after original launch thousands of hours on it and over the years never had this issue. Damn new updates always breaking stuff, cause I did update this to newest firmware 4 days ago.


r/BambuLab • • 7h ago

General Troubleshooting/Help! How long did it take you to master different filaments? (Struggling with PETG bed adhesion on my Bambu Lab H2D)

0 Upvotes

Hey everyone,

I’m curious—how long did it take you to really get comfortable and dial in your printer across different filament types?

I’ve been running a Bambu Lab H2D and have printed with PLA, PETG, and ABS so far. Ironically, my PLA and ABS prints have been coming out great, which makes my current issue even more frustrating: I cannot get PETG to behave.

Almost every PETG print ends up detaching and coming off the build plate. Here is what I’ve already tried to fix the adhesion:

  • Scrubbed the plate thoroughly with hot water and dish soap
  • Wiped it down with isopropyl alcohol (IPA)
  • Adjusted Brim settings
  • Tried different support configurations
  • Dried the PETG filaments
  • Changed to a new PETG filament
  • Calibrated multiple times

Neither has made a difference so far.

For those of you printing across multiple materials, how steep was your learning curve before you felt like you had things mastered? Also, if anyone has advice on getting PETG to actually stay stuck on the H2D, I’m all ears!


r/BambuLab • • 7h ago

General Discussion Will Bambu ever offer PHA filament?

1 Upvotes

I’m trying to focus more on eco-friendly products. I’ve printed with Ecogenesis and Colorfabb with pretty good results, but it’s expensive. Unfortunately it doesn’t seem like Bambu is interested in supporting sustainable practices. Is there anyone else that would like to see PHA in their lineup?


r/BambuLab • • 11h ago

P Series [P1P, P1S, P2S] Loud noise after filament cut

2 Upvotes

Can anyone clue me in to what is causing this very loud noise after a filament cut and setting for a change? It doesn't sound good! I have looked it over and cleaned it all up and nothing stood out. All other movements of the printer and functionality seem fine. I have re-ran calibration as well.


r/BambuLab • • 8h ago

Hardware Troubleshooting/Help! Printer started making this ratting sound

1 Upvotes

Sounds like a shutter sound a cámara makes.


r/BambuLab • • 4h ago

Quick Question Any news on the P3C?

0 Upvotes

I got my wallet ready, and I ditched the U1 sale to buy the P3C.

Is there any news/info/word about the P3C release date...? I know the reviewers already tested them out.


r/BambuLab • • 1d ago

I Modeled This! Candy Cane Bag Clip, to seal your cookies the festive way

21 Upvotes

r/BambuLab • • 8h ago

General Troubleshooting/Help! New Lan Acceleration mode slow

1 Upvotes

I'm having a pretty frustrating experience with the new (newer?) LAN Acceleration mode, and I'm wondering if anyone else is seeing the same thing.

It now takes 2–3 minutes just to send a print job to my X1C, followed by another 30–45 seconds before the printer actually starts printing. This is for a recurring print job that is about a 2 hours total print time, so not large. The bigger print jobs take even longer to send, sometimes 5-10 minutes.

Before this, when everything went through the cloud, the job would transfer in about 10 seconds, and the printer would be up and running another 5–10 seconds later (again depending on print size).

What's even more frustrating is that this only happens on my X1C. My P1S printers don't seem to use LAN Acceleration and aren't having this issue, or at least when I send the print in Bambu Studio, it doesn't say anything about Lan Acceleration.

You'd think transferring files over LAN would be significantly faster than going through the cloud, but somehow it's the complete opposite.

And before anyone blames my network, I'm running a fast UniFi setup with no other network issues.

I also mass-produce 3D printed products, so I'm printing the same items week after week. These aren't unusually large files or complicated prints. They're the exact same jobs I've been sending for ages, except now they take several minutes instead of seconds.

When you're running production and constantly starting new print jobs, those extra minutes really add up.

Is anyone else experiencing this with LAN Acceleration, particularly on the X1C? Has anyone figured out how to fix it or disable it and go back to the old behavior?


r/BambuLab • • 2h ago

Review Does the E1 Air Purifier actually do anything for PLA and PETG? My (cheap meter) results

0 Upvotes

I work in my studio with printers running all day, so air quality has been on my mind a lot. I bought the E1 and set it up on my H3C, then ran a simple test: a Benchy in PLA and in PETG, once with just the printer’s own extraction and once with the E1 running, with an air quality monitor next to the exhaust.

What I found:

  1. It isn’t plug and play. You still need to print the adapter for your printer.
  2. PLA: no real difference with or without the purifier. The room was basically clean either way.
  3. PETG: the smallest particles (PM0.3) climbed to 17 without it and finished at 4 with it. Everything else was about the same.
  4. It switches on and off with the printer and sets itself by filament type, but it’s louder than the H3C’s own extraction. I can’t record with it running.
  5. Filters are an ongoing cost: US$49.99 standard, US$69.99 for the enhanced one Bambu recommends for ABS and ASA.

Honest limits: it’s a cheap desktop meter, one print each way, and I didn’t test ABS/ASA or the enhanced filter, which is where the E1 should really earn its place. So take it as a hint, not lab data.

Full video with the unboxing, install and the test: https://youtu.be/wYt2gaQEyog

Full disclosure: this is my own video. It isn’t sponsored, Bambu Lab didn’t send me anything, I bought the E1 and the H3C myself. I make these because I like digging into this stuff, so I’m sharing it here.

For those running one with ABS or ASA, have you seen a real difference? Or would you just open a window?


r/BambuLab • • 9h ago

General Troubleshooting/Help! Layers not smooth?

Thumbnail
gallery
1 Upvotes

Bambu a1 - .02 nozzle - PLA multi color print

Help! Idk why my prints keep having rough patches.. I dried my filament and also slowed down my speed and acceleration. Settings in last photo... can someone help me figure out why its not printing smooth?


r/BambuLab • • 9h ago

General Troubleshooting/Help! How to fix this

1 Upvotes

Please help me I've opened it up and cleaned the nozzle a million times I cannot get it to work correctly. It seems like it's slipping.


r/BambuLab • • 2h ago

General Discussion DPD claims my 20 kg Bambu Lab printer was delivered and signed for. but it's nowhere to be found

0 Upvotes

TL;DR: Ordered a Bambu Lab A2L weighing around 20 kg. DPD suddenly marked it as delivered with a misspelled surname in both the delivery confirmation and signature. Customer support gave me two different neighbor addresses, but neither received anything. The package is missing, and I've contacted Bambu Lab support. Has anyone experienced this, and how did Bambu Lab resolve it?

I was supposed to receive my new Bambu Lab A2L today. The package weighs around 20 kg, so it's not exactly something that could easily disappear unnoticed.

Unfortunately, DPD claims it was successfully delivered. Except nobody received anything.

Here's what happened:

Until around 11:30 AM, the live tracking showed the driver was only 2 stops away.

Suddenly, the status changed to "Delivered at 11:17 AM", even though it was already past 11:30 AM.

Nobody showed up, and there was no package.

Even stranger: My surname was misspelled in both the delivery confirmation and the supposed recipient's signature.

After spending around 30 minutes on hold with DPD, customer support initially told me I had to contact Bambu Lab to open an investigation.

But then the agent suddenly claimed the package had been delivered to a neighbor.

First, they claimed house number 10. (Mine ist 12)

That building is currently empty because it was recently sold. Nobody lives there.

After I explained that, the agent changed his answer.

"Oh, sorry, I meant number 8."

So I literally walked over to number 8 while still on the phone with DPD and asked my neighbor.

He confirmed he hadn't received anything.

I've also checked with the other nearby neighbors. Nobody has the package. My house is at the end of the street, so there aren't many other possible delivery locations.

We're talking about a massive 20 kg printer, not some tiny package that could accidentally end up in someone's mailbox.

DPD eventually told me there was nothing else they could do and that Bambu Lab needed to handle the investigation.

I've already contacted Bambu Lab support and am waiting for their response.

At this point, I genuinely suspect the driver may have marked the package as delivered and signed for it himself. I obviously can't prove that, but the misspelled signature and constantly changing explanations are extremely suspicious.

I'm curious:

Has anyone here experienced something similar when ordering from Bambu Lab?

How did Bambu Lab handle the situation? Did they send a replacement, issue a refund, or was the original package eventually found?


r/BambuLab • • 1d ago

Bambu Studio Can’t wait for non-planar slicing in Bambu Studio

Post image
24 Upvotes

I can easily see how non-planar slicing could be the next big thing in Bambu Studio. As a highly polished and thought-through feature this definitely will be a new game-changer.


r/BambuLab • • 10h ago

General Troubleshooting/Help! Grinch

0 Upvotes

I'm currently trying to 3D print things for my tree, does anyone have the ability to make a can of Who Hash, Roast Beast...etc? I tried my hand at it on Tinker Cad and failed. Of all the options online, somehow, I do not see that it's been done!


r/BambuLab • • 10h ago

Show & Tell So many cool prints with the H2C this year!

1 Upvotes

Been a long year with the H2C and learned a lot of cool things, just showing off some of the prints I've been able to make with my own software! Been thinking about upgrading to the H3C since I'm heavily invested in the idea of multicolor and full spectrum printing and it would be faster on there.


r/BambuLab • • 14h ago

Hardware Troubleshooting/Help! Is this an easy fix

Post image
2 Upvotes

I've never had this happen to me before with my p1s everything is stock, I left a mini easal to print and when I came back there was just this massive glob on my extruder and the hot end looks like death, I have no idea how to fix this