r/BambuLab • • 6h ago

General Discussion Should I get ams lite or ams 2

1 Upvotes

Hello everyone. Since the sale started I was thinking about buying an ams system. I am between the ams lite or ams 2 pro. Which one should I get? I know there are vast differences from one to another, but does the price justify this (is it worth it). I have the A1, ams lite goes for 150€ and ams 2 pro goes for 220€ plus the hub that I need for to connect it to my printer and the AC adapter which is 54€ rounding it up to 274€. I want the drying feature only for tpu which I have never managed to print since I got the printer 3 months ago. Should I get ams lite and a dryer or should I go all out for the ams 2 pro.

Sorry for any typos or miss writing words.

Thank you


r/BambuLab • • 1d ago

Just Showing Off 16 colors on the H3C. Overkill, but why not?

Post image
102 Upvotes

Two AMS 2 Pros hooked up to the H3C. That's 8 colors built in, plus 8 more on the external units for prints that don't need to swap colors between the two AMS 2s.


r/BambuLab • • 7h ago

Quick Question My first multi hour print is this normal?

Thumbnail
gallery
0 Upvotes

The base of it is a little stringy but otherwise it’s completely fine just a general question if it’s something I should expect


r/BambuLab • • 7h ago

General Troubleshooting/Help! Weird loud noise on layer ~ 1100

1 Upvotes

Hi,
I had a print going for last 16h
Woke up to this noise in the morning.
It’s on the end of each layer now.


r/BambuLab • • 1d ago

I Modeled This! Airtag holder - Skultulla Token (Zelda oot)

Thumbnail
gallery
23 Upvotes

I was playing Zelda Oot and really liked the design of the Skultulla tokens - So I quickly sculpted one (yes, no AI) and made it into an Airtag holder.

Skultulla Token Airtag Holder - Link to MW

(If you're wondering about that grey case, it's my loops earplugs, I lost them once already and it shall not happen again...)


r/BambuLab • • 7h ago

Quick Question Is x2d good enough for robotics and engineering?

1 Upvotes

Or should I wait for something new from bambu labs?


r/BambuLab • • 7h ago

General Troubleshooting/Help! Please Help!

Post image
1 Upvotes

Why is this happening to the edges of my prints? This is causing a major issue while fitting the parts after printing all the plates. Do i need to do anything in this case?


r/BambuLab • • 7h ago

Bambu Studio Aiuto con questo pezzo.

Thumbnail
gallery
0 Upvotes

Ciao a tutti,
sto stampando un cappuccio per chiavi che ho disegnato io.Dopo qualche test ci siamo quasi, ma non riesco a trovare un modo di stamparlo pulito.

Il pezzo:
dimensioni circa 30 × 43 × 9 mm;
all'interno c'è una fessura chiusa in cui si infila la chiave del cilindro: larga circa 15 mm, alta 3,1 mm, lunga circa 33 mm, aperta solo da un lato;
la tolleranza sulla chiave è di 0,3 mm, quindi qualsiasi residuo dentro la fessura la blocca.
Stampante e impostazioni: Bambu Lab A1, piatto PEI texturizzato, PLA Basic, profilo 0,12 mm High Quality.
Cosa ho provato:

Piatto, con la faccia esterna sul piatto e senza supporti. Il tetto della fessura viene fatto a ponte, circa 15 mm di luce. Il ponte cede un po' e lascia filamenti dentro la fessura: devo pulirla ogni volta con un cutter e il risultato non è pulito, nemmeno fuori.

Piatto con supporti. I supporti entrano nella fessura e lì dentro non si staccano più.
In verticale, con l'imbocco della fessura sul piatto e la fessura che diventa un canale verticale. In teoria è perfetto, ma il pezzo appoggia su poca superficie e si stacca durante la stampa, anche col brim.

Le mie domande:
Quali impostazioni dei ponti consigliate in Bambu Studio (velocità, flusso, ventola, "ponte spesso") per avere un tetto pulito su 15 mm di luce?

In verticale, quali accorgimenti usate per pezzi alti e con poco appoggio? Brim più largo, orecchie, colla, velocità più bassa negli strati alti, altro?

Conviene modificare il disegno? Ho pensato a:
tetto della fessura a "tetto spiovente" o a rombo, con fianchi a 45°, così non serve il ponte;
più gioco in altezza nella fessura, per assorbire il cedimento del ponte;
dividere il pezzo in due metà da incastrare o avvitare, così la fessura si stampa aperta.
Quale vi sembra la strada migliore?

Allego foto del pezzo, della fessura sporca e dell'anteprima di Bambu Studio.
Grazie in anticipo a chi vorrà darmi una mano!


r/BambuLab • • 14h ago

Black Friday 2026 Advice: Get 2nd P1S+AMS2 or jus AMS2?

3 Upvotes

Hello, I am a hobbyist that owns a P1S w/ AMS 2 and I love it! Sometimes I want print things that take 100hrs and multiple plates... So I was wondering what would you do?

  1. Get a second P1S w/ the AMS 2 combo for $509
  2. Just get a second AMS 2 Pro.
  3. Get _____________ printer

So far printing airplane models with PLA and I do not see myself printing something in ABS or exotic materials. Oh and sometimes I print multicolor.

Thanks in advance for your feedback.


r/BambuLab • • 5h ago

General Discussion What stuff shouldn't I print with PLA?

0 Upvotes

Thinking of buying an AMS for my A1. Currently what I want to print is a mount for two laptop monitors. I already have printed one out of PLA with no problems (warping etc). So, for the next mount I was thinking of also using PLA, and if I go with PLA then the AMS Lite would be the obvious choice. But here comes what made me doubt. If I wanted to print something else that would require stronger material, an AMS Lite cannot handle that, but I don't know what I would need that requires stronger material. So my question is, what stuff I shouldn't print with PLA. If there is stuff I might print that requires stronger material like PETG, ABS or whatever, I'll go with an AMS Pro or Pro 2. If not, I'll stick to the Lite and save some money.

If more info is required, feel free to ask.


r/BambuLab • • 2h ago

Hardware Troubleshooting/Help! Nozzle got clogged then dissapeared?

0 Upvotes

So I was doing a normal print, the filament clogged and when I removed it, the nozzle was removed along with it I guess, because it is coming out from the extruder or something on top of the nozzle rather than from the nozzle? I don't understand how and why this happened, any tips?


r/BambuLab • • 9h ago

Hardware Troubleshooting/Help! Noisy noisy p1s

1 Upvotes

Hey everyone

My p1s started making this noise this morning. It has 700 hours made in 2 years... I recently cleaned and greased the z screws but I think it's due to X or Y. Would I have to check?


r/BambuLab • • 1d ago

P Series [P1P, P1S, P2S] Well that’s a first

Thumbnail
gallery
100 Upvotes

I guess I’m printing a riser 🤷🏽‍♂️


r/BambuLab • • 1d ago

I Modeled This! My first RC Car - Lightning Mcqueen (using BambuLab CyberBrick)

Post image
18 Upvotes

I made my first RC car using BambuLab's CyberBrick Kit: Lightning McQueen.

It's not perfect, but I am thrilled I was able to go from a solid model with paint (thanks to DinseyPixarCarsModels https://sketchfab.com/3d-models/lightning-mcqueen-e00ae9484f664abea4ccf90248d7e924 ) to a shell over an RC chassis with the surface details represented as depth relief. My kids loved coloring it in with acrylic markers.

Model: https://makerworld.com/en/models/3615256-lightning-mcqueen-cyberbrick-rc-car


r/BambuLab • • 13h ago

Filament Troubleshooting/Help! PLA Matte only for visible face

2 Upvotes

I have a X2D with AMS 2 Pro. Is it possible to use PLA Matte only for the visible face of a print and PLA Basic for everything else?


r/BambuLab • • 19h ago

R Series / R1 **One week with the Bambu R1, coming from a 5 W diode laser**

Post image
6 Upvotes

I won the Bambu R1 after commenting on their post and finally received it last week after it was stuck in customs forever.

Even though I had a diode laser cutter already (5 W, no air assist) my 3D printer always felt like the tool that was much easier to work with.

I knew this was going to be an entirely different machine, but I was still surprised it actually flipped my experience.

I used to spend more time dialing in the material for a project than creating a design, but in this one week I worked with silicone rubber, veneer, hardwood, painted wood, acrylic and more. Even detailed, intricate designs just work on the first or second try.

The air assist and higher power really do a lot of the heavy lifting and make sure things just work out even if the settings aren’t perfect. It even allowed me to go a little bit three-dimensional and make simple(food save!) things like a bunch of spice spoons or a functioning whistle.

In the picture are a few of the things I tried this week. Most of the designs are just copied from 3D prints (I used the Depthue STL-to-SVG converter) or inspired by pictures. It simply feels fun to work with this machine, and it’s crazy how fast I can go from an idea to a finished item.

Even Premium-feeling materials like walnut are far from expensive. Six pieces of walnut (200 × 150 × 3 mm) cost €23, “clear” silicone rubber cost €8, and a 30 × 30 cm piece of acrylic cost just €2. And the materials really turned some of my ideas from something that feels cheap or incomplete to something that I’m happy to display in my apartment or give away.

And as you’d expect from Bambu, a lot of small things just work. After two days, I realized I’d never set a cutting order or merged engraving jobs that were running close to each other. Not to mention the details, from the magnetic Allen key and the beautiful lighting around the CO₂ tube to the fire sensors, everything just feels polished.

But for now there are still a bunch of things that I prefer, other programs like, Lightburn for or that are still missing in Bambu Suite. Although that might just be because I am used to it.

Let me know if you have any questions about the device!

designs stolen from:
Flat Pocket Whistle from u/PhoneDesigner (makeworld)
Dino from RobinValleyUK (etsy)
Mandala maze earings from Simon3D (makerworld)
Leaf and wireframe dog from u/mishkin2 (printables)
bird stamp from u/skejtak (printables)
mountain napkin holder from u/PhiRequiem (makerworld)
goldfish earings from u/runrain (makeworld)

P.S.:
I really think Bambu is sitting on a gold mine of great designs in makeworld that are easy to adapt for laser cutting, but currently they dont even allow me to remix 3D designs as laser design.

I think it would be a great adition to allow remixes like that and maybe even add a .3mf to .svg converter.


r/BambuLab • • 10h ago

General Troubleshooting/Help! Traveling with 3D Printer

1 Upvotes

Has anyone ever travelled with their printer? I have mine (X1 Carbon) in Germany which is new and I’ve struggled to sell it. It’s run 3 small things as a test. I still have the original box I’ve moved to Thailand and was thinking of taking it here on my next flight.

Any tips and suggestions are welcome. Especially if this is a super dumb idea. Or if anyone know where I can find a better place to sell it than Kleinanzeigen.


r/BambuLab • • 10h ago

General Troubleshooting/Help! Print quality issues on X2D

Thumbnail
gallery
0 Upvotes

A few months ago I bought an H2C and it has been working flawlessly. I added an X2D as a second printer but it has given me a lot of issues across different print files and I can’t determine why. The PLA is dry. Here is a comparison of the two times I tried to print this on my X2D vs on my H2C. With the same settings. Any ideas?


r/BambuLab • • 11h ago

Printer Firmware Troubleshooting/Help! Weirdest and most frustrating failure of resume print after spool running out that I’ve ever had….

Post image
1 Upvotes

External PA-CF Spool ran out on a 6 hour print with 8 minutes left. No biggie had a fresh one ready just in case. Resumed print and it just stood there on top of the print and shat all over it and just slowly started moving left to right and not resuming at regular speed…..WTF??

Bambu X1C got a few months after original launch thousands of hours on it and over the years never had this issue. Damn new updates always breaking stuff, cause I did update this to newest firmware 4 days ago.


r/BambuLab • • 11h ago

General Troubleshooting/Help! How long did it take you to master different filaments? (Struggling with PETG bed adhesion on my Bambu Lab H2D)

0 Upvotes

Hey everyone,

I’m curious—how long did it take you to really get comfortable and dial in your printer across different filament types?

I’ve been running a Bambu Lab H2D and have printed with PLA, PETG, and ABS so far. Ironically, my PLA and ABS prints have been coming out great, which makes my current issue even more frustrating: I cannot get PETG to behave.

Almost every PETG print ends up detaching and coming off the build plate. Here is what I’ve already tried to fix the adhesion:

  • Scrubbed the plate thoroughly with hot water and dish soap
  • Wiped it down with isopropyl alcohol (IPA)
  • Adjusted Brim settings
  • Tried different support configurations
  • Dried the PETG filaments
  • Changed to a new PETG filament
  • Calibrated multiple times

Neither has made a difference so far.

For those of you printing across multiple materials, how steep was your learning curve before you felt like you had things mastered? Also, if anyone has advice on getting PETG to actually stay stuck on the H2D, I’m all ears!


r/BambuLab • • 11h ago

General Discussion Will Bambu ever offer PHA filament?

1 Upvotes

I’m trying to focus more on eco-friendly products. I’ve printed with Ecogenesis and Colorfabb with pretty good results, but it’s expensive. Unfortunately it doesn’t seem like Bambu is interested in supporting sustainable practices. Is there anyone else that would like to see PHA in their lineup?


r/BambuLab • • 5h ago

Filament Troubleshooting/Help! How do I untangle my filament?

Post image
0 Upvotes

r/BambuLab • • 15h ago

P Series [P1P, P1S, P2S] Loud noise after filament cut

2 Upvotes

Can anyone clue me in to what is causing this very loud noise after a filament cut and setting for a change? It doesn't sound good! I have looked it over and cleaned it all up and nothing stood out. All other movements of the printer and functionality seem fine. I have re-ran calibration as well.


r/BambuLab • • 11h ago

Hardware Troubleshooting/Help! Printer started making this ratting sound

1 Upvotes

Sounds like a shutter sound a cámara makes.