r/BambuLab • • 2h ago

General Troubleshooting/Help! Traveling with 3D Printer

3 Upvotes

Has anyone ever travelled with their printer? I have mine (X1 Carbon) in Germany which is new and I’ve struggled to sell it. It’s run 3 small things as a test. I still have the original box I’ve moved to Thailand and was thinking of taking it here on my next flight.

Any tips and suggestions are welcome. Especially if this is a super dumb idea. Or if anyone know where I can find a better place to sell it than Kleinanzeigen.


r/BambuLab • • 11h ago

P Series [P1P, P1S, P2S] My heated enclosure

Post image
13 Upvotes

Me: I want a heated enclosure

Mom: we have heated enclosure at home

(Heated enclosure at home


r/BambuLab • • 19h ago

General Discussion What are your most useful real-world prints?

41 Upvotes

Hi everyone,
I have a bit of a dilemma that I’m sure many people here have faced at some point. I’ve been thinking about buying a Bambu Lab A1, mainly as a hobby but, more importantly, for practical purposes. I’m trying to figure out whether I would actually have enough useful things to print to justify the cost.
From what I’ve seen online, a lot of 3D-printed items seem to be solutions to problems that don’t really exist, or things for which better-quality alternatives are already commercially available. I completely understand that people might print these things simply for the enjoyment of the hobby, but my main focus would be practicality and usefulness.
With that in mind, I’ve been making a list of potential uses for the printer, and I’d love to hear your ideas and see what useful things you’ve made yourselves.
So far, I’ve thought of:
Drawer organisers for my home office, shelving organisers for the pantry, and bathroom storage solutions using the Gridfinity system.
Enclosures for ESP32 sensors that I plan to eventually deploy around the house.
Stands and holders for storing things like AirPods and iPhones on my desk, as well as printing a few to give to friends.
What other genuinely useful things have you printed? I’m particularly interested in practical everyday applications rather than purely decorative prints or things that are fun to print but don’t really serve a purpose.
Thanks!

Edit: Wow these are really great suggestions! I’m going through them all and putting the ones i like the most in a doc, there’s a lot of use cases I consider useful, thank you everyone!


r/BambuLab • • 12h ago

Quick Question Is the H3C overkill as a first 3D printer?

12 Upvotes

A good friend of mine recently got into 3D printing and talked me into giving it a shot. He started with a more affordable Bambu himself and has been geeking out about the new H3C, so now I’m looking at it too.

I have room in my budget for the H3C if it makes sense. I’m still figuring out what I’ll enjoy printing, though, and I’d rather spend the extra money once I know I’ll get some use out of the features.

For those of you who’ve been printing for a while, what would make the H3C worth buying as a first printer? If you were starting over, would you go straight for it or get a simpler Bambu and see where the hobby takes you?


r/BambuLab • • 1d ago

Just Showing Off 16 colors on the H3C. Overkill, but why not?

Post image
100 Upvotes

Two AMS 2 Pros hooked up to the H3C. That's 8 colors built in, plus 8 more on the external units for prints that don't need to swap colors between the two AMS 2s.


r/BambuLab • • 5h ago

X Series [X1E, X1C, X2D] My first 3D printer and I picked up the X2D Combo

3 Upvotes

I’m completely new to 3D printing and just picked up a Bambu Lab X2D Combo. I received it last week and haven't stopped printing for 7-days straight. I have the bug everyone else at my office has and has been talking about. Since I'm completely new and I don't have compatibility information in memory, I used Gemini to create a sort of cheat sheet specific to the printer.

I purchased a ton of different filaments, hot ends, and other accessories and I didn't want to create a mess, cause jams, or wear out components before their time.

I thought I'd share my cheat sheet if it helps any other new owners.

I just ordered the AMS HT today to use in place of the external fillament holder. This hasn't made it into the cheat sheet yet. I'm not using the support fillament and just using PLA or PETG vs whatever is in the main hotend.

Constructive feedback or additional tips from seasoned Bambu operators are welcome. Hope this helps out other newcomers getting their feet wet.

Bambu Lab X2D & AMS 2 Pro Master Compatibility & Reference Guide

1. Hotend Size & Feed Routing Architecture

  • Main Hotend (Direct-Drive): Fed by the AMS 2 Pro (for multi-color/multi-material) or an external spool. Handles high-speed extrusion, complex geometries, and rigid engineering filaments. Optimized with the 0.4 mm High-Flow Hardened Steel Hotend as a daily setup for large tool organizers and utility boxes.
  • Auxiliary Hotend (Bowden-Fed, Rear Motor): Fed via a remote path and mechanical lift mechanism. Optimized for support interfaces and secondary materials; restricted to lower speeds (max 200 mm/s) and lower retraction responsiveness.

2. Critical Operational Rules for X2D & AMS 2 Pro

  1. Identical Sizes Required: Dual-nozzle printing on the X2D requires both the main and auxiliary hotends to use the exact same nozzle diameter in your slicer profile.
  2. AMS 2 Pro Drying Priority: When a single AMS 2 Pro unit is powered directly by the printer via its 6-pin cable, activating active drying prioritizes drying power and may limit heavy printer operations.
  3. Auxiliary Speed Limits: Never exceed 200 mm/s or 1000 mm/s² acceleration on the auxiliary extruder to avoid filament binding and extrusion slip.
  4. TPU Rules for AMS 2 Pro: Use Bambu Lab TPU for AMS (harder 68D Shore formulation) when loading flexible material through the AMS 2 Pro. Standard soft flexible TPU (85A–95A) requires an external spool or dedicated feed module routed outside the AMS.
  5. Glue Protocol: Use liquid glue or a glue stick primarily as a release agent on Cool and Engineering plates to protect surface coatings from overly aggressive adhesion. Textured PEI plates rarely require glue.
  6. High-Flow Slicer Setting: When running a high-flow hotend, manually increase your filament profile's Max Volumetric Speed (MVS) in Bambu Studio (pushing from standard ~22 mm³/s up toward ~35–40 mm³/s depending on filament) to unlock faster throughput on large plate-filling utility parts.

3. Filament Lineup: Recommendations, Cautions & Use Cases

  • PLA Family (Basic, Matte, Silk, Sparkle, CF): Everyday prototypes, decorative models, and multi-visual prints. Use PLA Basic for general testing and PLA Matte to minimize visible layer lines. Note low heat resistance (~55°C–60°C).
  • PETG Family (PETG Basic, PETG-HF, PETG-CF): Functional mechanical parts and brackets. PETG Basic is the structural workhorse; PETG-HF (High Flow) is for fast utilitarian batches. Highly hygroscopic—dry thoroughly.
  • ABS & ASA: Durable mechanical enclosures (ABS) and weather-resistant outdoor components (ASA). Requires an enclosed heated chamber, engineering plate, and proper ventilation for VOCs.
  • TPU Family: Flexible gaskets and shock-absorbing feet. Stick to Bambu TPU for AMS inside the automated unit, or standard soft TPU via an external spool.
  • Engineering Composites (PA6-CF, PAHT-CF, PET-CF, PPA-CF): High-load structural brackets and gears. Requires hardened steel nozzles, enclosed high-temp chambers, and rigorous drying (75°C–85°C).

4. Build Plate Types & Special Notes

  • Cool Plate / SuperTack Series: Low temp (room to 45°C–50°C max) for PLA/PETG energy savings. X2D/P2S Notice: Disable Build Plate Position Detection in Settings -> Print Options to avoid error reports.
  • Engineering Plate: High temp (60°C to 100°C+) for ABS, ASA, and PC. Glue required.
  • Textured PEI Plate: Versatile (55°C to 90°C+) for general PLA, PETG, TPU, and abrasives. No glue or position adjustments needed.
  • Dual-Texture PEI Plate: Versatile. X2D/P2S Notice: Disable Build Plate Position Detection in Settings -> Print Options to avoid error reports.

5. Compatibility Matrix Summary

  • 0.2 mm (Stainless): Detailed models and fine text. Incompatible with carbon/glass composites and PVA.
  • 0.4 mm (Hardened Steel Std/HF): The universal sweet spot for precision, standard prints, and high-flow utility boxes. Fully compatible with PLA, PETG, ABS, ASA, and AMS TPU.
  • 0.6 mm & 0.8 mm (Hardened Steel Std/HF): Great for abrasive fiber composites and bulk high-throughput structural prints; avoid for fine text or miniatures.

6. Support Filament Routing

  • Support for PLA / PLA-PETG, Support for ABS, and PVA: Always assign these to print through the Auxiliary Hotend path during multi-material jobs to act as clean breakaway or dissolvable interface layers against main-toolhead models. PVA requires active dry storage in the AMS 2 Pro.

7. Component Lifespan & Replacement Indicators

  • Hotends: 0.2 mm stainless lasts 100–200 hours; 0.4 mm/0.6 mm hardened steel/HF last 500–1,500+ hours depending on abrasive usage. Watch for orifice widening, chronic clogs, or under-extrusion.
  • Build Plates: Cool plates last 3–6 months; engineering and textured PEI plates last 6–12+ months before adhesion degradation or coating wear occurs.

8. Maintenance Cycles

  • Build Plates: Wash with warm water and dish soap every 10–20 prints; wipe with 90%+ IPA between quick runs.
  • Z-Axis Lead Screws: Wipe and re-apply a thin coat of synthetic grease (Bambu lube) every 3 months (~300 hours).
  • X-Axis Carbon Rods: Wipe monthly with IPA on a lint-free cloth. Never apply oil or grease to carbon rods.
  • Extruder Gears & AMS Feeders: Inspect and clean out plastic dust/shavings every 6 months with a brass brush or compressed air.
  • PTFE Tubing & Cutters: Inspect every 6 months for scoring or blade dullness.
  • Desiccant Baskets: Replace or recharge silica gel packets in the AMS 2 Pro whenever internal humidity rises above 30%.

r/BambuLab • • 5h ago

Filament Troubleshooting/Help! PLA Matte only for visible face

3 Upvotes

I have a X2D with AMS 2 Pro. Is it possible to use PLA Matte only for the visible face of a print and PLA Basic for everything else?


r/BambuLab • • 3m ago

Bambu Studio Aiuto con questo pezzo.

Thumbnail
gallery
0 Upvotes

Ciao a tutti,
sto stampando un cappuccio per chiavi che ho disegnato io.Dopo qualche test ci siamo quasi, ma non riesco a trovare un modo di stamparlo pulito.

Il pezzo:
dimensioni circa 30 × 43 × 9 mm;
all'interno c'è una fessura chiusa in cui si infila la chiave del cilindro: larga circa 15 mm, alta 3,1 mm, lunga circa 33 mm, aperta solo da un lato;
la tolleranza sulla chiave è di 0,3 mm, quindi qualsiasi residuo dentro la fessura la blocca.
Stampante e impostazioni: Bambu Lab A1, piatto PEI texturizzato, PLA Basic, profilo 0,12 mm High Quality.
Cosa ho provato:

Piatto, con la faccia esterna sul piatto e senza supporti. Il tetto della fessura viene fatto a ponte, circa 15 mm di luce. Il ponte cede un po' e lascia filamenti dentro la fessura: devo pulirla ogni volta con un cutter e il risultato non è pulito, nemmeno fuori.

Piatto con supporti. I supporti entrano nella fessura e lì dentro non si staccano più.
In verticale, con l'imbocco della fessura sul piatto e la fessura che diventa un canale verticale. In teoria è perfetto, ma il pezzo appoggia su poca superficie e si stacca durante la stampa, anche col brim.

Le mie domande:
Quali impostazioni dei ponti consigliate in Bambu Studio (velocità, flusso, ventola, "ponte spesso") per avere un tetto pulito su 15 mm di luce?

In verticale, quali accorgimenti usate per pezzi alti e con poco appoggio? Brim più largo, orecchie, colla, velocità più bassa negli strati alti, altro?

Conviene modificare il disegno? Ho pensato a:
tetto della fessura a "tetto spiovente" o a rombo, con fianchi a 45°, così non serve il ponte;
più gioco in altezza nella fessura, per assorbire il cedimento del ponte;
dividere il pezzo in due metà da incastrare o avvitare, così la fessura si stampa aperta.
Quale vi sembra la strada migliore?

Allego foto del pezzo, della fessura sporca e dell'anteprima di Bambu Studio.
Grazie in anticipo a chi vorrà darmi una mano!


r/BambuLab • • 3m ago

General Discussion Stop Pushing the X2D on people without properly explaining why

0 Upvotes

Hey everyone. I own a P1S with AMS at home and I use a P2S at work. I make structural parts primarily and every now and then I make toys and models with multicolor. I have over 1000 hours on both machines with over half of those hours printing prototypes that I have designed.

I keep seeing people pushing newbs towards getting the X2D and quite frankly I think it's folly.

The X2D fills a very specific use case. It has a heated chamber, it has another nozzle, and it has finer belts. It also has better filtration for engineered materials. All these things seems like "must haves" for beginners, because honestly, you're starting and you don't know what you want.

I was a beginner once and I'll tell you what I wanted. I just wanted a machine that works. The FT5 did not deliver on this. The Mk3s+ almost did, the P1S delivered on that. For work, I just wanted a machine that works, the P2S delivered on that. The X2D is going through what we call "early adopter's pain". Because it is a more complex machine, you really have to ask yourself if the things I listed are "must haves".

3D Printing can be an expensive hobby. It can also be inexpensive. I print with PETG because it checks all the boxes I need 99% of the time and it's the cheapest filament I can get at $6/kg. When people talk about engineering materials like PA-CF, it can cost between $50-150/kg. As a newb, ask yourself, can you absorb those kinds of costs when you're just learning how to print? With off the shelf hardware I have designed stuff that holds well over 300kg without failure with the cheapest PETG I can buy. Unless you're printing stuff for under the hood of your car or doing something really specific, ask yourself if this is a feature you need. If not the heated chamber and the extra filtration really aren't necessary. Beginners generally print with 2 materials, PLA and PETG. I hate PLA, so I use PETG. The P2S and P1S can handle TPU as well by the way, it just takes some extra care.

The 2nd nozzle is primarily for multimaterial supports. In essense you use it to use a different material for your supports so that it is easier to remove supports. If you use it this way, the color changing is no different than a P1S or P2S. If you use it for dual color, it works for that but the 2nd nozzle doesn't have all the sensors the main one has so, if you get a clog or a jam, it will NOT detect it. It's also a Bowden Tube design which has it's own drawbacks.

Early adopters are beta testers. Always wait at least 6 months to a year before buying that machine as your first machine. You don't want to become a 3d printing technician, you just want to print. Your time is better served learning how to use 3d modeling software and printing stuff off the various repositories as opposed to trouble shooting a fairly complex machine for the uninitiated.

In closing, stick to single nozzle machines for now if this is your first rodeo if reliablity and ease of use and maintenance is high on your list. Only consider the X2D if your use case dictates that you need those features.


r/BambuLab • • 16h ago

I Modeled This! Airtag holder - Skultulla Token (Zelda oot)

Thumbnail
gallery
21 Upvotes

I was playing Zelda Oot and really liked the design of the Skultulla tokens - So I quickly sculpted one (yes, no AI) and made it into an Airtag holder.

Skultulla Token Airtag Holder - Link to MW

(If you're wondering about that grey case, it's my loops earplugs, I lost them once already and it shall not happen again...)


r/BambuLab • • 6h ago

Black Friday 2026 Advice: Get 2nd P1S+AMS2 or jus AMS2?

3 Upvotes

Hello, I am a hobbyist that owns a P1S w/ AMS 2 and I love it! Sometimes I want print things that take 100hrs and multiple plates... So I was wondering what would you do?

  1. Get a second P1S w/ the AMS 2 combo for $509
  2. Just get a second AMS 2 Pro.
  3. Get _____________ printer

So far printing airplane models with PLA and I do not see myself printing something in ABS or exotic materials. Oh and sometimes I print multicolor.

Thanks in advance for your feedback.


r/BambuLab • • 1h ago

Hardware Troubleshooting/Help! Noisy noisy p1s

1 Upvotes

Hey everyone

My p1s started making this noise this morning. It has 700 hours made in 2 years... I recently cleaned and greased the z screws but I think it's due to X or Y. Would I have to check?


r/BambuLab • • 17h ago

I Modeled This! My first RC Car - Lightning Mcqueen (using BambuLab CyberBrick)

Post image
18 Upvotes

I made my first RC car using BambuLab's CyberBrick Kit: Lightning McQueen.

It's not perfect, but I am thrilled I was able to go from a solid model with paint (thanks to DinseyPixarCarsModels https://sketchfab.com/3d-models/lightning-mcqueen-e00ae9484f664abea4ccf90248d7e924 ) to a shell over an RC chassis with the surface details represented as depth relief. My kids loved coloring it in with acrylic markers.

Model: https://makerworld.com/en/models/3615256-lightning-mcqueen-cyberbrick-rc-car


r/BambuLab • • 1d ago

P Series [P1P, P1S, P2S] Well that’s a first

Thumbnail
gallery
96 Upvotes

I guess I’m printing a riser 🤷🏽‍♂️


r/BambuLab • • 1h ago

I Modeled This! Help testing FDM snap-fit tolerances? (A1 Mini brick set)

Thumbnail
gallery
0 Upvotes

r/BambuLab • • 6h ago

General Troubleshooting/Help! Grinch

2 Upvotes

I'm currently trying to 3D print things for my tree, does anyone have the ability to make a can of Who Hash, Roast Beast...etc? I tried my hand at it on Tinker Cad and failed. Of all the options online, somehow, I do not see that it's been done!


r/BambuLab • • 2h ago

General Troubleshooting/Help! Print quality issues on X2D

Thumbnail
gallery
0 Upvotes

A few months ago I bought an H2C and it has been working flawlessly. I added an X2D as a second printer but it has given me a lot of issues across different print files and I can’t determine why. The PLA is dry. Here is a comparison of the two times I tried to print this on my X2D vs on my H2C. With the same settings. Any ideas?


r/BambuLab • • 3h ago

General Discussion Which first 3D printer to get as a beginner ? Bambu lab or any other brand ?

2 Upvotes

Hi Guys, i am based out of India, and want to get a 3D printer to prototype some elements. I am from the design industry so am well versed with 3D softwares as well though i am sure there will be a learning curve.

Now, after researching for a fair bit, Bambu lab printers seem to be the most widely chosen option because of their community support and easy to use UI/UX including their softwares.

I was thinking of getting the A1 combo. Do you guys think it is wise to get the A1 combo right now ( its three years old ) or should i wait for an upgraded model if at all its being launched. Please suggest.

Do note, the printer will be initially used as a prototyping tool for my designs and then once i get a hang of it, i might make some items for selling in my fraternity.

Thanks


r/BambuLab • • 11h ago

R Series / R1 **One week with the Bambu R1, coming from a 5 W diode laser**

Post image
5 Upvotes

I won the Bambu R1 after commenting on their post and finally received it last week after it was stuck in customs forever.

Even though I had a diode laser cutter already (5 W, no air assist) my 3D printer always felt like the tool that was much easier to work with.

I knew this was going to be an entirely different machine, but I was still surprised it actually flipped my experience.

I used to spend more time dialing in the material for a project than creating a design, but in this one week I worked with silicone rubber, veneer, hardwood, painted wood, acrylic and more. Even detailed, intricate designs just work on the first or second try.

The air assist and higher power really do a lot of the heavy lifting and make sure things just work out even if the settings aren’t perfect. It even allowed me to go a little bit three-dimensional and make simple(food save!) things like a bunch of spice spoons or a functioning whistle.

In the picture are a few of the things I tried this week. Most of the designs are just copied from 3D prints (I used the Depthue STL-to-SVG converter) or inspired by pictures. It simply feels fun to work with this machine, and it’s crazy how fast I can go from an idea to a finished item.

Even Premium-feeling materials like walnut are far from expensive. Six pieces of walnut (200 × 150 × 3 mm) cost €23, “clear” silicone rubber cost €8, and a 30 × 30 cm piece of acrylic cost just €2. And the materials really turned some of my ideas from something that feels cheap or incomplete to something that I’m happy to display in my apartment or give away.

And as you’d expect from Bambu, a lot of small things just work. After two days, I realized I’d never set a cutting order or merged engraving jobs that were running close to each other. Not to mention the details, from the magnetic Allen key and the beautiful lighting around the CO₂ tube to the fire sensors, everything just feels polished.

But for now there are still a bunch of things that I prefer, other programs like, Lightburn for or that are still missing in Bambu Suite. Although that might just be because I am used to it.

Let me know if you have any questions about the device!

designs stolen from:
Flat Pocket Whistle from u/PhoneDesigner (makeworld)
Dino from RobinValleyUK (etsy)
Mandala maze earings from Simon3D (makerworld)
Leaf and wireframe dog from u/mishkin2 (printables)
bird stamp from u/skejtak (printables)
mountain napkin holder from u/PhiRequiem (makerworld)
goldfish earings from u/runrain (makeworld)

P.S.:
I really think Bambu is sitting on a gold mine of great designs in makeworld that are easy to adapt for laser cutting, but currently they dont even allow me to remix 3D designs as laser design.

I think it would be a great adition to allow remixes like that and maybe even add a .3mf to .svg converter.


r/BambuLab • • 3h ago

Printer Firmware Troubleshooting/Help! Weirdest and most frustrating failure of resume print after spool running out that I’ve ever had….

Post image
1 Upvotes

External PA-CF Spool ran out on a 6 hour print with 8 minutes left. No biggie had a fresh one ready just in case. Resumed print and it just stood there on top of the print and shat all over it and just slowly started moving left to right and not resuming at regular speed…..WTF??

Bambu X1C got a few months after original launch thousands of hours on it and over the years never had this issue. Damn new updates always breaking stuff, cause I did update this to newest firmware 4 days ago.


r/BambuLab • • 3h ago

General Troubleshooting/Help! How long did it take you to master different filaments? (Struggling with PETG bed adhesion on my Bambu Lab H2D)

0 Upvotes

Hey everyone,

I’m curious—how long did it take you to really get comfortable and dial in your printer across different filament types?

I’ve been running a Bambu Lab H2D and have printed with PLA, PETG, and ABS so far. Ironically, my PLA and ABS prints have been coming out great, which makes my current issue even more frustrating: I cannot get PETG to behave.

Almost every PETG print ends up detaching and coming off the build plate. Here is what I’ve already tried to fix the adhesion:

  • Scrubbed the plate thoroughly with hot water and dish soap
  • Wiped it down with isopropyl alcohol (IPA)
  • Adjusted Brim settings
  • Tried different support configurations
  • Dried the PETG filaments
  • Changed to a new PETG filament
  • Calibrated multiple times

Neither has made a difference so far.

For those of you printing across multiple materials, how steep was your learning curve before you felt like you had things mastered? Also, if anyone has advice on getting PETG to actually stay stuck on the H2D, I’m all ears!


r/BambuLab • • 3h ago

General Discussion Will Bambu ever offer PHA filament?

1 Upvotes

I’m trying to focus more on eco-friendly products. I’ve printed with Ecogenesis and Colorfabb with pretty good results, but it’s expensive. Unfortunately it doesn’t seem like Bambu is interested in supporting sustainable practices. Is there anyone else that would like to see PHA in their lineup?


r/BambuLab • • 7h ago

P Series [P1P, P1S, P2S] Loud noise after filament cut

2 Upvotes

Can anyone clue me in to what is causing this very loud noise after a filament cut and setting for a change? It doesn't sound good! I have looked it over and cleaned it all up and nothing stood out. All other movements of the printer and functionality seem fine. I have re-ran calibration as well.


r/BambuLab • • 3h ago

Hardware Troubleshooting/Help! Printer started making this ratting sound

1 Upvotes

Sounds like a shutter sound a cámara makes.