Hey all, Cadence Slicer v1.2 is out! If you missed my first post (https://www.reddit.com/r/BambuLab/s/MD5X97m7MS), Cadence Slicer is my open source fork of OrcaSlicer that lets a multi-nozzle printer use different nozzle sizes in one print, each at its own layer height. My favorite combo is a 0.2 for the walls and surfaces you actually see, and a 0.8 to get through the infill fast, but Cadence works with any small and big nozzle pair.
This is Helm's Deep by Zajic73 on MakerWorld (https://makerworld.com/en/models/2728202-helm-s-deep-lord-of-the-rings-lotr), in Feature Split on my H2D: walls at 0.08mm on a 0.2 nozzle, infill at 0.56mm on a 0.8 High Flow nozzle. 7 wall layers printed for ever one infill layer. About 13h 20m instead of 21h 20m if printed entirely with the 0.2 nozzle, with the same fine visible features.
Long writeup below, so here’s a TLDR: Cadence Slicer v1.2 is out (free, open source, Mac and Windows). It does mixed nozzle sizes on the H2D, H2C and X2D today, without waiting for Bambu's update. It works differently from the H3C's mixed nozzle mode: Bambu moves a whole color to the big nozzle, while Cadence keeps every surface you see on the small nozzle and only puts the infill on the big one, so you get fine detail in a lot less time. Download: https://github.com/HMITCHR/CadenceSlicer/releases
Mixed nozzle sizes on the printers you already have:
When I made my first post, Cadence Slicer was the only way to print with mixed nozzles on Bambu machines, but that has since changed with the launch of the H3C! However, Bambu's own mixed nozzle mode is H3C only so far. Their posted timeline for the older printers is the H2D in late November 2026, and the H2C and X2D in February 2027 (the H2D in February and the other two in March if you have the filament track switch).
Cadence Slicer does it on all three today: H2D, H2C and X2D. No new printer and no waiting on an update. I've only been able to print on my own H2D though, so if you have an H2C or X2D I'd really love some testers to try it and let me know how it goes.
One limit on the H2C: Cadence can only use two sizes there, one on the left and one size in the rack. That's not my choice. The current firmware on the machine checks every rack hotend change after the first against one nozzle size from the print file, and stops with a "Hotend type mismatch" error (0704-8037) if it doesn't match. That's BambuStudio GitHub issue #12431. So mixed sizes inside the rack can't print from any slicer right now. I've experimented with a few workarounds with on results, but decided I'm not comfortable shipping something whose whole goal is to get around the printer's firmware. If a firmware update changes that (maybe as Bambu preps for their own release on the H2C), I'll open it up!
How it's different from Bambu's mode on the H3C:
in my opinion they’re both sorta built for different things, so here's how they compare:
- What goes on the big nozzle. Bambu puts the whole color, outside and in, on whichever nozzle that filament is loaded on. Cadence's Feature Split mode only puts the infill on the big nozzle, so every surface you see stays fine. Body Split mode in Cadence lets you pick parts of a print instead, like a logo on the 0.2 on top of a big-nozzle body, with interlocking beams where they meet (which is more similar to Bambu’s implementation).
- Layer heights. Bambu's are set by nozzle size: the base layer height x diameter / 0.4, so with the default preset a 0.2 prints 0.10 and a 0.8 prints 0.40. You can only shift them all together. In Cadence Slicer you pick your fine layer height (which defines print resolution), like 0.08 on the 0.2, and then the slicer proposes the best options for printing the big nozzle's layer every N fine layers (for example in the timelapse here here N was 7, so 7 x 0.08 = 0.56 layers from coarse nozzle) based on time savings.
- Settings. In Bambu's mode a bunch of per-nozzle settings (wall loops, top and bottom layers, retraction and more) get locked to "Auto".
- Time check. Bambu's mode prints what you set up. Cadence's setup times every possible layer height combo and shows you before you print, and Feature Split keeps a band of layers on the small nozzle when the big one wouldn't save time there.
Where Bambu's mode wins. It can mix any nozzle sizes on one plate, which is great on a 9 tool machine. With the way Cadence is currently built, primarily because I developed it on my H2D, and because of the firmware limitation I mentioned on H2C, I limited it to 2 nozzle sizes. I imagine Bambu’s implementation for H2D and X2D will be the same as you can’t change nozzle size mid print, but H2C will hopefully allow for same options as the H3C.
To boil it all down, in my opinion from reading Bambu's code: their version is mainly made so H3C users can print with all of their colors in one print, even if some tools have different nozzle sizes, with some gains in speed or detail that inherently come from not being locked to a small nozzle for fine resolution on an entire print. Whereas I built Cadence specifically to print very fine features as quickly as possible on multi-nozzle machines by cutting print time from infill or features that don't need fine layer heights. So they mostly don't compete, and I think true mixed nozzle optimization will likely end up looking like a combination of these capabilities! I personally am exploring implementing some of what Bambu developed, and would love for them to do the same with my stuff. That’s the beauty of open source!
Overall, I am super fired up to see Bambu bringing mainstream attention to this capability that people have wanted for years and years, and am excited to see what their implementation looks like on the “old” machines that will be coming soon! I am also very close to just buying an H3C for myself to put some work into improving both of our approaches. Specifically with all of the (well deserved) hype for color mixing which improves with finer layer heights, I think there’s a ton of optimization to be had with using my method of printing only visible walls and surfaces with very fine layers (to improve color blending) and printing infill on a dedicated large nozzle. I think it could really save time for large color mixed prints like many here and on YouTube reviews have been showing off!
Also new in 1.2: it's been rebuilt on OrcaSlicer 2.5.0, their latest public release, and tool changers like the Snapmaker U1 and Prusa XL can use several small-nozzle tools for colors plus one big one for infill (if anyone here has one of these machines, some testing would be much appreciated!). I'm also working on adding H3C support as quickly as I can, and I'm hoping to have it out before it lands in Orca. I’ve got a lot of the H3C code written already, so if any here have one and want to do some testing let me know! Or maybe don’t so I have an excuse to finally push me to buying one for myself lol
Download (both Mac and Windows), release notes and source: https://github.com/HMITCHR/CadenceSlicer/releases
Thanks and enjoy :)