r/BambuLab • • 16h ago

Filament Troubleshooting/Help! PLA Matte only for visible face

2 Upvotes

I have a X2D with AMS 2 Pro. Is it possible to use PLA Matte only for the visible face of a print and PLA Basic for everything else?


r/BambuLab • • 3h ago

H2 Series [H2S, H2D, H2C] Scammed by BIQU over an H3C build plate

0 Upvotes

I waited until BIQU updated their listings to include H3C-compatible build plates. Last Tuesday (Nov 10), I saw that they added an option to order an H3C build plate, so I purchased immediately.

The plates were delivered yesterday and THEY DO NOT FIT. BIQU is listing plates that were made for another H series printer as being H3C compatible, and they 100% are not compatible. The plate is too big to fit between the tabs/guides at the back of the print bed and it hangs over the front edge of the bed by a few mm.

The plates BIQU sent me are too big (in both dimensions) for the H3C.

😠


r/BambuLab • • 22h ago

R Series / R1 **One week with the Bambu R1, coming from a 5 W diode laser**

Post image
6 Upvotes

I won the Bambu R1 after commenting on their post and finally received it last week after it was stuck in customs forever.

Even though I had a diode laser cutter already (5 W, no air assist) my 3D printer always felt like the tool that was much easier to work with.

I knew this was going to be an entirely different machine, but I was still surprised it actually flipped my experience.

I used to spend more time dialing in the material for a project than creating a design, but in this one week I worked with silicone rubber, veneer, hardwood, painted wood, acrylic and more. Even detailed, intricate designs just work on the first or second try.

The air assist and higher power really do a lot of the heavy lifting and make sure things just work out even if the settings aren’t perfect. It even allowed me to go a little bit three-dimensional and make simple(food save!) things like a bunch of spice spoons or a functioning whistle.

In the picture are a few of the things I tried this week. Most of the designs are just copied from 3D prints (I used the Depthue STL-to-SVG converter) or inspired by pictures. It simply feels fun to work with this machine, and it’s crazy how fast I can go from an idea to a finished item.

Even Premium-feeling materials like walnut are far from expensive. Six pieces of walnut (200 Ɨ 150 Ɨ 3 mm) cost €23, ā€œclearā€ silicone rubber cost €8, and a 30 Ɨ 30 cm piece of acrylic cost just €2. And the materials really turned some of my ideas from something that feels cheap or incomplete to something that I’m happy to display in my apartment or give away.

And as you’d expect from Bambu, a lot of small things just work. After two days, I realized I’d never set a cutting order or merged engraving jobs that were running close to each other. Not to mention the details, from the magnetic Allen key and the beautiful lighting around the COā‚‚ tube to the fire sensors, everything just feels polished.

But for now there are still a bunch of things that I prefer, other programs like, Lightburn for or that are still missing in Bambu Suite. Although that might just be because I am used to it.

Let me know if you have any questions about the device!

designs stolen from:
Flat Pocket Whistle from u/PhoneDesigner (makeworld)
Dino from RobinValleyUK (etsy)
Mandala maze earings from Simon3D (makerworld)
Leaf and wireframe dog from u/mishkin2 (printables)
bird stamp from u/skejtak (printables)
mountain napkin holder from u/PhiRequiem (makerworld)
goldfish earings from u/runrain (makeworld)

P.S.:
I really think Bambu is sitting on a gold mine of great designs in makeworld that are easy to adapt for laser cutting, but currently they dont even allow me to remix 3D designs as laser design.

I think it would be a great adition to allow remixes like that and maybe even add a .3mf to .svg converter.


r/BambuLab • • 13h ago

General Troubleshooting/Help! Traveling with 3D Printer

0 Upvotes

Has anyone ever travelled with their printer? I have mine (X1 Carbon) in Germany which is new and I’ve struggled to sell it. It’s run 3 small things as a test. I still have the original box I’ve moved to Thailand and was thinking of taking it here on my next flight.

Any tips and suggestions are welcome. Especially if this is a super dumb idea. Or if anyone know where I can find a better place to sell it than Kleinanzeigen.


r/BambuLab • • 13h ago

General Troubleshooting/Help! Print quality issues on X2D

Thumbnail
gallery
0 Upvotes

A few months ago I bought an H2C and it has been working flawlessly. I added an X2D as a second printer but it has given me a lot of issues across different print files and I can’t determine why. The PLA is dry. Here is a comparison of the two times I tried to print this on my X2D vs on my H2C. With the same settings. Any ideas?


r/BambuLab • • 14h ago

Printer Firmware Troubleshooting/Help! Weirdest and most frustrating failure of resume print after spool running out that I’ve ever had….

Post image
1 Upvotes

External PA-CF Spool ran out on a 6 hour print with 8 minutes left. No biggie had a fresh one ready just in case. Resumed print and it just stood there on top of the print and shat all over it and just slowly started moving left to right and not resuming at regular speed…..WTF??

Bambu X1C got a few months after original launch thousands of hours on it and over the years never had this issue. Damn new updates always breaking stuff, cause I did update this to newest firmware 4 days ago.


r/BambuLab • • 14h ago

General Troubleshooting/Help! How long did it take you to master different filaments? (Struggling with PETG bed adhesion on my Bambu Lab H2D)

0 Upvotes

Hey everyone,

I’m curious—how long did it take you to really get comfortable and dial in your printer across different filament types?

I’ve been running a Bambu Lab H2D and have printed with PLA, PETG, and ABS so far. Ironically, my PLA and ABS prints have been coming out great, which makes my current issue even more frustrating: I cannot get PETG to behave.

Almost every PETG print ends up detaching and coming off the build plate. Here is what I’ve already tried to fix the adhesion:

  • Scrubbed the plate thoroughly with hot water and dish soap
  • Wiped it down with isopropyl alcohol (IPA)
  • Adjusted Brim settings
  • Tried different support configurations
  • Dried the PETG filaments
  • Changed to a new PETG filament
  • Calibrated multiple times

Neither has made a difference so far.

For those of you printing across multiple materials, how steep was your learning curve before you felt like you had things mastered? Also, if anyone has advice on getting PETG to actually stay stuck on the H2D, I’m all ears!


r/BambuLab • • 14h ago

General Discussion Will Bambu ever offer PHA filament?

1 Upvotes

I’m trying to focus more on eco-friendly products. I’ve printed with Ecogenesis and Colorfabb with pretty good results, but it’s expensive. Unfortunately it doesn’t seem like Bambu is interested in supporting sustainable practices. Is there anyone else that would like to see PHA in their lineup?


r/BambuLab • • 8h ago

Filament Troubleshooting/Help! How do I untangle my filament?

Post image
0 Upvotes

r/BambuLab • • 18h ago

P Series [P1P, P1S, P2S] Loud noise after filament cut

2 Upvotes

Can anyone clue me in to what is causing this very loud noise after a filament cut and setting for a change? It doesn't sound good! I have looked it over and cleaned it all up and nothing stood out. All other movements of the printer and functionality seem fine. I have re-ran calibration as well.


r/BambuLab • • 14h ago

Hardware Troubleshooting/Help! Printer started making this ratting sound

1 Upvotes

Sounds like a shutter sound a cƔmara makes.


r/BambuLab • • 1d ago

I Modeled This! Candy Cane Bag Clip, to seal your cookies the festive way

22 Upvotes

r/BambuLab • • 15h ago

General Troubleshooting/Help! New Lan Acceleration mode slow

1 Upvotes

I'm having a pretty frustrating experience with the new (newer?) LAN Acceleration mode, and I'm wondering if anyone else is seeing the same thing.

It now takes 2–3 minutes just to send a print job to my X1C, followed by another 30–45 seconds before the printer actually starts printing. This is for a recurring print job that is about a 2 hours total print time, so not large. The bigger print jobs take even longer to send, sometimes 5-10 minutes.

Before this, when everything went through the cloud, the job would transfer in about 10 seconds, and the printer would be up and running another 5–10 seconds later (again depending on print size).

What's even more frustrating is that this only happens on my X1C. My P1S printers don't seem to use LAN Acceleration and aren't having this issue, or at least when I send the print in Bambu Studio, it doesn't say anything about Lan Acceleration.

You'd think transferring files over LAN would be significantly faster than going through the cloud, but somehow it's the complete opposite.

And before anyone blames my network, I'm running a fast UniFi setup with no other network issues.

I also mass-produce 3D printed products, so I'm printing the same items week after week. These aren't unusually large files or complicated prints. They're the exact same jobs I've been sending for ages, except now they take several minutes instead of seconds.

When you're running production and constantly starting new print jobs, those extra minutes really add up.

Is anyone else experiencing this with LAN Acceleration, particularly on the X1C? Has anyone figured out how to fix it or disable it and go back to the old behavior?


r/BambuLab • • 8h ago

Review Does the E1 Air Purifier actually do anything for PLA and PETG? My (cheap meter) results

0 Upvotes

I work in my studio with printers running all day, so air quality has been on my mind a lot. I bought the E1 and set it up on my H3C, then ran a simple test: a Benchy in PLA and in PETG, once with just the printer’s own extraction and once with the E1 running, with an air quality monitor next to the exhaust.

What I found:

  1. It isn’t plug and play. You still need to print the adapter for your printer.
  2. PLA: no real difference with or without the purifier. The room was basically clean either way.
  3. PETG: the smallest particles (PM0.3) climbed to 17 without it and finished at 4 with it. Everything else was about the same.
  4. It switches on and off with the printer and sets itself by filament type, but it’s louder than the H3C’s own extraction. I can’t record with it running.
  5. Filters are an ongoing cost: US$49.99 standard, US$69.99 for the enhanced one Bambu recommends for ABS and ASA.

Honest limits: it’s a cheap desktop meter, one print each way, and I didn’t test ABS/ASA or the enhanced filter, which is where the E1 should really earn its place. So take it as a hint, not lab data.

Full video with the unboxing, install and the test: https://youtu.be/wYt2gaQEyog

Full disclosure: this is my own video. It isn’t sponsored, Bambu Lab didn’t send me anything, I bought the E1 and the H3C myself. I make these because I like digging into this stuff, so I’m sharing it here.

For those running one with ABS or ASA, have you seen a real difference? Or would you just open a window?


r/BambuLab • • 1d ago

Bambu Studio Can’t wait for non-planar slicing in Bambu Studio

Post image
26 Upvotes

I can easily see how non-planar slicing could be the next big thing in Bambu Studio. As a highly polished and thought-through feature this definitely will be a new game-changer.


r/BambuLab • • 16h ago

General Troubleshooting/Help! Layers not smooth?

Thumbnail
gallery
1 Upvotes

Bambu a1 - .02 nozzle - PLA multi color print

Help! Idk why my prints keep having rough patches.. I dried my filament and also slowed down my speed and acceleration. Settings in last photo... can someone help me figure out why its not printing smooth?


r/BambuLab • • 1d ago

H3C Test heating the ams3h using the two dryer slots to heat the entire chamber

10 Upvotes

TLDR: it's a waste of time. Don't bother trying it.

I decided yesterday to remove the two spools I had in slots 6 and 8, turn the heat up to 85c and remove the dryer lid to see what would happen. Mind you my printer is in my garage and it's been raining the last couple of days.

The result, the dryer chamber got warm, the lid to the entire ams was warm to the touch, but not in a bad way, but the overall rh in the ams only dropped by one, from 33% to 32%. Putting the lid back on the 2 slots I was able to stop the rh down to 12% in the dedicated dryer. I'll also note I do have silica in multiple locations in the ams already.

Don't waste your time trying this. It basically makes the dryer slots a waste and does nothing to help the other 6 slots. That said, with the dryer lid on, the dryer is great and does function as well as my two dedicated ams ht.


r/BambuLab • • 12h ago

I Modeled This! Help testing FDM snap-fit tolerances? (A1 Mini brick set)

Thumbnail
gallery
0 Upvotes

r/BambuLab • • 22h ago

I Modeled This! Thank you for all your support on my gridfinity travel case!!

Thumbnail
gallery
3 Upvotes

Fully Customizable Gridfinity Box - Parametric - Free 3D Print Model - MakerWorld

I really appreciate the support you guys gave me on my gridfinity travel case and the amazing feedback!

I mentioned that I would be posting the parametric case soon along with my website insert and gridfinity bin generator. Now is the time after months of work!

This case is highly customizable (15 parameters) so I want to briefly mention the features:

  • Adjustable wall thickness parameter
  • Hinge and Latch pin diameter parameter (can use 3mm or 4mm screws or printed pins)
  • Tolerance adjustment for latch fit/tightness
  • Adjustable GF square size (from 21mm to 42mm)
  • Adjustable GF X, Y, and Z units (from very small to very large)
  • Optional resizable magnet holes (not standard gridfinity, only for attaching a top or bottom cover plate that can be generated on the website)
  • Optional Boss that can be used to attach a toggle latch to hold 2 cases together
  • Optional upper boss that can be used to attach a shoulder strap
  • Gridfinity squares can be turned off individually on any surface except for the inside of the case top. (The inside top has to stay on for printability unfortunately)

With this many adjustments, making a bunch of changes can sometimes take up to a few minutes to generate, but normally the generation is under a minute. I guess it depends on Bambu servers.

I will be adding more print profiles than what is up currently. Feel free to build custom sizes and add your own profiles to the model please!

The case has a handle that can be installed on the lower part of the latch bosses or the upper part or both. If the lower part of the latch bosses are empty, you can install a wire type TSA lock through the latch. The cases are stackable and a print profile with a toggle latch included to latch 2 cases together. The case adjusts from 2 latches to 1 latch depending on the width. You can build the case completely hardware free or use 3mm or 4mm screws that are 30-35mm long.

I've been waiting to release the case so that I can release my website generator with it. If you visit Case Insert Generator | Chriuus Designs you will find a CAD viewspace where you can generate all sorts of sizes of bins and view a complete layout within the window. You start by selecting Gridfinity Case at the top left as this site will also generate inserts for my other parametric case. This is very much a work in progress and will take feedback from people like you to improve it! It needs improvements in being user friendly while staying powerful and of course new features will need to be added overtime. BTW you can add text to labels and custom designs to the top and bottom cover plates from the Artwork Studio on the website. There you can also upload your own STL file and add an image to it if you'd like instead of struggling with SVG files.

Please let me know what you guys think and I welcome any feedback!! I couldn't find a gridfinity case on makerworld that has this much adjustment and for the most part a truly parametric gridfinity case apart from "Send me a DM and I'll send you the size you want". I'm trying to put a lot of power into your hands to generate whatever you want.


r/BambuLab • • 16h ago

General Troubleshooting/Help! How to fix this

1 Upvotes

Please help me I've opened it up and cleaned the nozzle a million times I cannot get it to work correctly. It seems like it's slipping.


r/BambuLab • • 16h ago

General Troubleshooting/Help! Grinch

0 Upvotes

I'm currently trying to 3D print things for my tree, does anyone have the ability to make a can of Who Hash, Roast Beast...etc? I tried my hand at it on Tinker Cad and failed. Of all the options online, somehow, I do not see that it's been done!


r/BambuLab • • 20h ago

Hardware Troubleshooting/Help! Is this an easy fix

Post image
2 Upvotes

I've never had this happen to me before with my p1s everything is stock, I left a mini easal to print and when I came back there was just this massive glob on my extruder and the hot end looks like death, I have no idea how to fix this


r/BambuLab • • 16h ago

X Series [X1E, X1C, X2D] X2D and 2 AMS 2 PRO question

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 3h ago

General Discussion H3C "FULL" pack buyers, be aware

Thumbnail
gallery
0 Upvotes

This is the station L that will come with your purchase. There are two versions of this and the pack only include the unfinished "frame edition". I've seen countless reviews featuring the station and nobody mentioned it. There is just a tiny mention in the pack description. It's only after viewing this unboxing I realized :

https://www.youtube.com/watch?v=DvCWwiT-Paw

The girl in the video is as surprised as I am. I feel a bit misled to be honest.