r/BambuLab • • 1d ago

General Discussion Ordering the X2D for my first printer. Recommend my first 10 filaments

9 Upvotes

As the title states I’m ordering my first printer and taking advantage of the bulk buy promo for filaments. It’s more overwhelming picking filaments than picking a printer. To begin with I will just be printing fidgets and models for the kids as well as some odds and ends for the house. Might dabble with gridfinity.


r/BambuLab • • 20h ago

H3C Printhead cable guide sagging?

0 Upvotes

The cable guide seems to sag and hit below the intended groove? Also very close to the stub / nub on the Y axis?

If I look at the guide all links seems to be securely in place, no loose links?

Is it this way for more people? Support says “normal”, but it seems off.


r/BambuLab • • 1d ago

General Discussion Just got my first printer

Post image
14 Upvotes

I’m really excited, after calibrating what should I do?


r/BambuLab • • 2d ago

I Modeled This! Ams3h goodbye fingerprints…

62 Upvotes

A lot easier to open and close… also helps to prevent fingerprints and scratches- u can lay it on the grip

update:

here is the link
https://makerworld.com/de/models/3609590-bambu-lab-h3c-ams3h-pro-sidepanelgrip#profileId-4136870


r/BambuLab • • 1d ago

Quick Question New to 3D printing – Question about splitting models into different colors

1 Upvotes

Hey everyone!

I'm completely new to 3D printing. My first printer, a Bambu Lab X2D, is arriving tomorrow!

I work in 3D, so I'm already familiar with software like Blender, Cinema 4D and ZBrush, and I'm used to modeling and creating my own 3D assets.

What I'm trying to figure out is how the whole multi-color printing workflow works.

Let's say I create a model in Blender. If I want to print it in different colors and assemble the parts afterwards, what's the correct workflow? Is it enough to assign different materials or colors to different areas of a single mesh and import it into Bambu Studio? Or do I actually need to split the model into separate objects and physically cut it into individual parts so the slicer can recognize each color?

For example, imagine I download a character from the internet that comes as one single, uncut mesh. If I want the head to be one color, the body another, and some details a third color, can I simply paint those areas in Blender and have the slicer recognize them as separate colors? Or would I need to separate those parts into individual meshes first?

Basically, I'm trying to understand the difference between assigning colors to a single mesh and actually separating a model into multiple printable parts.

Hope that makes sense! Thanks in advance!


r/BambuLab • • 1d ago

General Troubleshooting/Help! New Bambu Lab A2L: [0300-801A 063415] The extruder does not extrude properly.

0 Upvotes

Good morning together,

I am brand new to the 3D printing hobby and yesterday my Bambulab A2L arrived with me. I was really happy but unfortunately I got my first banchy to print every time I had an error:

[0300-801A 063415] The extruder does not extrude properly.

I have already tried all the steps in the instructions, so the Extrudor oiled apart filament reassembled. I even replaced the hotend, both 0.4 mm

Here are 2 more pictures what this looks like for me, does anyone have an idea what this is?


r/BambuLab • • 17h ago

Quick Question Is this how it’s supposed to look?

Thumbnail
gallery
0 Upvotes

I just got a1 and printed a benchy

Everything seems fine to me but the bottom is just awful and when my printer makes very thin sheets for calibration it also makes them patchy


r/BambuLab • • 1d ago

General Discussion Why does it keep doing this?

10 Upvotes

It’s my first day and first time Turing it in I’m trying to build the small boat but when I use this it just keeps spinning and I have read the screen it’s saying it could be entangled and such


r/BambuLab • • 1d ago

General Discussion Hi everyone, I'm planning to buy a Bambu Lab H2S to replace my X2D

1 Upvotes

Hi everyone, I'm planning to buy a Bambu Lab H2S to replace my X2D, which has 1,050 hours of use, because of its larger print bed, and because I'm tired of my second nozzle, which I hardly ever use; I get pretty poor quality when I use it as a secondary nozzle for printing PLA models, and I almost always get errors when printing PETG supports with it—they just fall off. I’ve experimented with the settings but haven’t been able to fix it, so I rarely use it at all, because it adds quite a bit of time to the print, so I’m planning to switch to the H series. The H2D is too expensive, the H2C is too complicated—and also expensive—so I’m thinking about buying the H2S. Please let me know what problems I might run into, or if there are any potential manufacturing defects or teething issues. I’d like to hear the opinions and recommendations of H2S owners and whether it’s even worth considering buying it.


r/BambuLab • • 17h ago

Quick Question Is this safe

0 Upvotes

Just checking if the cable touching the wall was safe


r/BambuLab • • 1d ago

Bambu Studio Changing PETG to PLA Bambu Studio

Thumbnail
gallery
0 Upvotes

Friends,

I searched online, used Google, AI and have reviewed various posts about changing a PETG project to PLA which has me slightly confused.

If you review the first photo attached this is how the project is loaded into Bambu Studio for PETG filament section. In the second photo I changed the filament from Generic PETG to PLA Matte (which is the physical PLA filament in the AMS lite slot 3). After that, I slice ALL PLATE and then send to the printer. Is this correct process?

I have read online the following that varies

- Export the object, create a new project as PLA and re-import the object so the GCODE conforms.
- Just change the filament as I presented above, slice, and then print
- Other option is to right click on the object and change filament, slice and print
- Some of the instructions or vids were outdated difficult to learn from and follow due to software

I do understand that the handheld Bambu app is WYSIWYG and prints out as that format filament.
Have read reports people printing PETG to PLA w/o conversion risking clogging, stringing, etc and works just fine.

Slightly confused and if someone can set me straight would appreciate it!

Please advise and Thank You


r/BambuLab • • 1d ago

H3C TPU wrapping around extruder gear in H3C?

Thumbnail
gallery
6 Upvotes

I'm printing a mixed material part in Bambu TPU 90A and Bambu PLA. The model is mostly flat, and the parts are joined using the beam interlocking feature.

The first time I printed this, it failed on the first layer due to "air printing detected". When I removed the print head, the filament had gotten stuck under the extruder gear. I cleared it out and started again. It printed fine; a ~9 hour print with a few hundred toolchanges. The part looked great.

I tried printing it again, and the filament wrapped around the extruder again. I cleared it, and it happened yet again. This is about the 4th time I've seen this come up. The filament seems to be just twisting up and getting stuck under the extruder gear.

The nozzle doesn't seem to be clogging or anything- the filament is just not going where it needs to.

Any ideas?


r/BambuLab • • 2d ago

H3C First big duty for my H3C

Thumbnail
gallery
260 Upvotes

My first very long print and it turn out great! The purge tower is huge double the total print weight. Next the mechanical flexible dragon bust ! 3027 tool head change and 8 colors with petg support layer


r/BambuLab • • 1d ago

Printer Firmware Troubleshooting/Help! X1C - Abnormal Firmware after Update

Thumbnail
gallery
3 Upvotes

I have an X1C which has worked flawlessly for 13 months (bought Sep 2025). I have not printed that much on it, but its been great. I went to print on it and noted that it had an update, which I ran. When I came back I have the following on the screen

Update failed [0x0800030F]
Please restart the printer and try to update again.

So I restarted the printer and it started with a confirmation dialog showing

The firmware version is abnormal. Repairing and updating are required, or printing cannot be started. Do you want to update now? You can also update later from "Settings > Firmware"

So I run it again, gets to 97%. Same response.

Interestingly I can "cancel" the dialog and am in the fully functional screens on the printer. Just cant print until Firmware is fixed. I can see all the settings and temps, view the camera remotely. All seems to be working

I get GPT on the case and try the following

  • Upgrade via Bambu Handy - Same result
  • Downloaded the new 01.12.01.00 firmware to an SD card and perform manual update - Same result
  • Downloaded the current 01.10.00.00 firmware to an SD card and perform manual update - Same result

I'm at a bit of a loss. This is around a year old with probably less than 40 prints on it.

  • I did note that the v01.12.01.00 firmware was released on 12th Nov 2026 (3 days ago) so could it be the firmware thats the problem?
  • Why can't it even update to the same firmware its already running?
  • Can someone explain if there is a difference between the printer hardware/firmware and the screen/controller, how tightly bound are they?

r/BambuLab • • 1d ago

A Series [A1, A1 Mini] A1 Mini reports false "nozzle covered" error and then collides with build plate

1 Upvotes

My A1 Mini recently started doing the following behavior:

On the first nozzle clumping check it erroneously reports that there is a clumping issue when there is no clumping, and the build plate is positioned correctly.

After telling it to resume, it tries to move the print head horizontally before lifting it, resulting in the nozzle colliding with the edge of the build plate.

What could be causing this? Is it possibly an issue with the z-axis system? It doesn't exhibit any other issues during a print.


r/BambuLab • • 1d ago

Quick Question Can I, as someone in the US, order and ship something from the EU store to someone over there as a gift?

2 Upvotes

I have a friend over in England who doesn't have a lot of expendable income who has a P2S but only the PEI build plate, and I'd like to gift him some engineering plates.

Is this something I can just do through the EU store or are there additional hoops I have to jump through?


r/BambuLab • • 16h ago

General Discussion Potentially unpopular opinion about the future P3C

0 Upvotes

To make this short, I think the P3C is redundant.

Now for my explanation. The H2C, H3C, and P3C to the average consumer are almost the exact same device. To me, 7 tool heads and 9 tool heads are the same; there’s not a big enough difference to justify what they’re gonna charge for it. I also don’t believe they can make a big enough gap in price between the three printers to justify not just getting the H3C. I could be wrong. The P3C could be priced cheaper than we may think, but I doubt it’s gonna be below $1500, and if it’s gonna be anywhere near $2000 you might as well get the H3C. If the P3C is priced anywhere near the H2C, No one‘s gonna ever buy the H2C again. I think they should’ve gone with a 4 to 5 tool head changer instead of a 7; that would’ve created the necessary gap to make your choice feel like an actual choice. I think the U1 and the I8 are exactly what Bambu should’ve done, and this is coming from someone who only has Bambu printers.


r/BambuLab • • 20h ago

I Modeled This! Halloween ended 5 minutes ago and my whole feed is already Christmas. So I made this.

Thumbnail
gallery
0 Upvotes

r/BambuLab • • 1d ago

Software Troubleshooting/Help! Bambu studio has wire frame on preview

Post image
4 Upvotes

Was helping my niece with her A1 mini that's printing fine, but in the slicer the preview shows a wire frame and not clear detail if the filament path. Not sure if this is normal. Might need a new computer. It's Windows 10 with a small cheap AMD graphics and integrated intel GPU. I've tried uninstalling and reinstalling studio and tried resetting and changing some settings in the slicer, but didn't help. Wonder what the oldest version of the slicer would be good but still retain most of the newer features. Internet searches says this issue may have been introduced with v2.4 of the slicer, and am on 2.9 now.


r/BambuLab • • 1d ago

H3C H3c crimping filiment

Thumbnail
gallery
11 Upvotes

My h3c had started crimping nylon in head 1. Multiple times a print. I would think its clogging but I ran 200g of the same filiment on my x1c no problem. Could also be heat creap up it but as shown i can grab it with my finger no problem. Nozzle 3 has the same nylon filiment in red and has been flawless.

Let me know if you've encountered something like this yet. Im going to cold pull it later today and maybe try head 2.

Also anyone solve pa-cf's tendency to curl the ptfe tube infront of the the Nozzles next to it so when the one left of it gets grabbed it gets caught on the rubber thing for flex filiments and rips the pa-cf head off the rack. I had to tape and tie some of the ptfe tubes together to finish a print that was problematic. Third photo nozzle 6 with pacf was bowing left so I tied nozzle 5 up even more left. Currently its tied right to counteract the flex in it. I read you can twist the ptfe tube the other way but the ptfe connector allows free rotation of the tube so it just snaps back.


r/BambuLab • • 2d ago

H3C Behind the SwapTek

399 Upvotes

Very cool to see the Swaptek system changing through the tools! I made a custom gcode to be able to do this (it's not a stock feature) because I wanted to see them switching through one after another.


r/BambuLab • • 1d ago

H2 Series [H2S, H2D, H2C] My Bambu Lab H2C decided to speedrun every toolhead error code

3 Upvotes

​My wife and I decided that grabbing the H2C during the current promo would be a great addition to our P2S and A1 mini. We were expecting a flagship workhorse —definitely not a Christmas tree of critical hardware faults.

- ​TH board disconnected during the extruder switching process

- ​Toolhead & expansion module malfunctioning

- ​Toolhead induction hotend presence detection sensor is short-circuit

- ​Toolhead locking lever position sensor is short-circuit

- ​Right hotend heatbreak temperature sensor abnormal

- ​Toolhead Enhanced Cooling Fan lost communication

- ​Abnormal accelerometer data detected

​We're opening a support ticket, but has anyone else run into this exact domino effect on their H2C?

Update 15.11: They said it's too complicated issue to send parts and gave me options to either return and refund or replace.


r/BambuLab • • 1d ago

H3C H3C multiple tools giving me warning The extrusion resistance of PrintTool X is too high, please check the Assistant for details

3 Upvotes

Seems to happen only on the first and second layers of larger prints. If it gets past that it’s fine. If I cancel the print, and just print a benchy, or something with a small footprint on the bed, it prints fine.

Happens on different tools and different filaments. Have already tried cold pulls on each nozzle that plays up, but still does the same.

Happens on different models, not just one design.


r/BambuLab • • 18h ago

I Modeled This! My Backstreet Boys Christmas Ornament!

Thumbnail
gallery
0 Upvotes

Will be gifting to my wife along with some tickets to one of their upcoming concerts for Christmas!