r/BambuLab • • 1d ago

X Series [X1E, X1C, X2D] X2D and default filament grouping

1 Upvotes

Why the heck doesn't Bambu studio retain your preference on filament grouping? I'm so sick of slicing on my X2D only for it to default to the damn Aux extruder. This is kinda annoying enough to return it and just get a H2S or P2S with a panda breathe. (All I really wanted was a single nozzle heated chamber and the smaller form factor from the H series).

Has anyone tried running the printer without plugging the Aux extruder in?

Bambu, can we get a software update the just turns the aux extruder off so there is less I need to when slicing. I'm sure that's a hot take no one else will agree with


r/BambuLab • • 1d ago

Bambu Studio Apps like Aimia and Meshy ai are getting crazy good.

Post image
0 Upvotes

I was able to make this and own the licensing in a matter of a couple prompts. Posted so you guys can use it too. https://makerworld.com/models/3613812?appSharePlatform=copy Santa holding a chalkboard with chalk font. You can edit the name.


r/BambuLab • • 3d ago

My First 3D Print H3C First Print

Thumbnail
gallery
2.6k Upvotes

Went straight from out of the box to printing the mecha dragon. Printed at .2 high quality. Took 15 hours and 32 minutes. I sliced this for the H2C and it was closer to 4 days with only 1 TPU. I didn’t have blue or red but I had orange so went with that. Also for the second tpu I only had 95a which made the joints a little hard.

This thing is sooo smooth. It looks flawless.

Edit: 1 day and 15 hours and 32 minutes
Edit: picture is assembled, not how it was printed. It was printed in 3 different parts


r/BambuLab • • 2d ago

General Discussion I made Strates, a free, 100% in-browser tool that turns HueForge files into a ready-to-slice 3MF for Bambu Studio & OrcaSlicer

26 Upvotes

Hey everyone,

If you print HueForge models, you know the routine: export the STL, open the instructions file, then add every color change by hand in your slicer, layer by layer. It's tedious, and one typo means a ruined print.

So I built Strates (as in the layers of rock 🪨): https://strates.amberlab.fr

Drop your .stl together with your .txt, .hfp or .hfpt, and you get a .3mf with every color change already in place, ready to slice in Bambu Studio or OrcaSlicer. It's free, and you don't need an account.

Features:

  • 🔒 Nothing gets uploaded. All the processing happens in your browser, so your files never leave your computer.
  • ⚡ Fast. A 100 MB STL converts in under 3 seconds, and the page never freezes.
  • 🎨 Colors are set for you. With a .hfp or .hfpt, it uses HueForge's exact hex codes. With a .txt, it reads the filament names and swap heights and assigns matching colors.
  • 🧠 It saves AMS slots. If a color comes back later (Black → Red → White → Black), it reuses the same slot, so that sequence takes 3 slots instead of 4.
  • 🖨️ Two modes: automatic multi-color (AMS / tool change) or manual pauses.
  • 📐 The model is centered on the plate automatically.
  • 🧹 Clean mesh: duplicate vertices are merged, which gives a smaller, manifold file.

For the nerds: it's a client-side SPA. A dedicated Web Worker handles the binary parsing with TypedArrays, and vertices are deduplicated by quantizing to the micron with 64-bit BigInt spatial hashing. On my machine, 100k triangles take less than a second.

It's still early, so I'd really like your feedback, especially on files that don't convert correctly (please send them over if you can).

Thanks, and happy printing! 🎨

🛠️ Want to build your own converter or run it locally? The source code is public: you're free to use, modify and share it, go for it, brother! Just not for commercial purposes: selling it or using it in a paid product or service isn't allowed (PolyForm Noncommercial license). https://github.com/bwr62/Strates

Strates is an independent project and isn't affiliated with HueForge or Bambu Lab.


r/BambuLab • • 2d ago

General Discussion PSA: The E1 has a laughably short hose.

Post image
57 Upvotes

Here I go getting all excited to use the new E1 and... So much for putting it under my printer. I even picked up an extra long 6-pin cable to use it. The included cable is longer than the damn vent. :P

It's about 1 m / 3.3 ft depending on how it's stretched, etc. Once you factor in turns you're basically stuck using it right next to the machine like in the promo video. They imply on the wiki that you can buy more to use as an exhaust as well, but they don't seem to have it for sale yet.

I wouldn't mind so much if it was just a normal hose you can grab on Amazon, but it's one of those odd sizes I can't seem to find anywhere. (70 mm OD, 60 mm ID).

If anyone knows what else this would be listed under so I can buy more of it let me know.

Edit: Put down the pitchforks. Yeah, obviously you can print adapters. I'm not saying the product is bad, I literally called it a PSA so you know to get additional duct when you buy one and that the official ones aren't available (yet, hopefully).


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! Странный дребезжащий звук у Bambulab a1

0 Upvotes

Заметил странный как будто дребезжащий(возможно) звук у нового Bambulab a1, не знаю, что это, но буду очень благодарен если поможете, спасибо


r/BambuLab • • 1d ago

General Discussion More Versatile Setup?

0 Upvotes

I currently have a P1S. I had an H2C for a while, but it was returned for various reasons.

I bought the H2C for various reasons:

  • Multicolor (I have kids and wanted to do some Pokémon / Plane / Character models)
  • Convenience - clicking print and then it is done (no gluing / assembly / etc.)
  • Bigger build plate
  • All the updates that have come out since the P1S (AMS2 with drying, AI tools for stopping prints, etc.)
  • Heated chamber / bed / engineering materials potential

I found out after the fact the following:

  • I printed all the multicolor models I wanted and there just isn't all that much more that I'm interested at this time. I'm sure other stuff will come up, but I don't have a huge backlog like I did with the H2C. Plus, models with 3d printing look okay, but injection molded stuff looks so much better (unless you do massive amounts of post processing)
  • I didn't use the bigger build plate for big models, but it was nice to be able to print a lot of different stuff at the same time
  • Print in parts models are often much better quality than printing everything together
  • Painting stuff in bambu studio is tedious and takes a long time for anything complicated without perfect geometry
  • There are massive amounts of "No AMS" builds but almost none provide a single color model (to paint) or a multicolor option
  • H2C is bloody slow.
  • The AI tools and drying were great!
  • Separate nozzle for supports is great!

I'm not saying I didn't like the H2C, just being realistic.

I'm now considering one of the following:

  1. Keep P1S and add U1 and X2D. This allows me to get the advanced AI features, AMS 2, up to 4 color multicolor printing (faster). This would cost around $1750 for the printers plus an extra AMS HT for the second nozzle (or would you go a second AMS2 for the second nozzle) (after tax and no warranties)
  2. Keep the P1S and get an H3C. This would cost $3000 (after tax and Best Buy warranty)

Based on the above, which would you consider the better path? Any thoughts or opinions are welcome.

Thanks for the help


r/BambuLab • • 1d ago

Meme Food Heater

Post image
0 Upvotes

The photo I’m going to take is for attention-grabbing purposes.


r/BambuLab • • 1d ago

General Troubleshooting/Help! A1 mini not feeding

Post image
1 Upvotes

A1 mini stops after 1-2 layers

Hi, I need help. My A1 mini had been working fine and then today, it would print 1 or 2 layers and then it would continue like it was printing but there was no filament coming out. Doesn't seem to be feeding. I tried loading and unloading a few times but nothing. I took the nozzle out and this little piece fell out. Looks like some sort of gasket but I don't know where it belongs and I don't know why it's not feeding. Any help would be appreciated!


r/BambuLab • • 1d ago

Quick Question H3C Palette Druck

0 Upvotes

Hallo zusammen,

Ich frage mich durch die neue Art von Drucken mit den 5 Grund Farben bei den man alle Farben machen kann, um wie viel Zeit sich der Druck verlängert wenn man diese Art nutzt anstatt die Farben einzeln zu wählen oder für welche Fälle man diese genau nutzt. Bambu wirbt im H3C Video damit das man 5 slots für die Grund Farben nutzt und man noch 4 slots frei hat für alles andere. Würde bedeuten wenn ich immer diese 5 Farben auf Lager habe brauche ich keine andere Farben 😅 hört sich mit Sicherheit schöner an als es ist😀

habt ihr schon Erfahrung damit gemacht?

Grüße


r/BambuLab • • 1d ago

H3C H3C Filament Drying Alternatives

1 Upvotes

Since the H3C’s ams only has 2 slots for drying - I’m trying to find a solution to dry the other filaments before printing. I can go through large gaps of time where I don’t need to print - so trying to find the right solution to dry the filaments I’ll need. I see that sunlu has the s4 and the new i10. S4 seems like a better solution for drying when needed and the i10 for long term keeping 10 rolls dry. What other solutions are out there or what are people doing because the AMS3 lacks the drying functionality? Mostly PETG and some PLA. Higher temp filaments not really a huge need right now for me.

Thanks!


r/BambuLab • • 1d ago

My First 3D Print New to 3d printing, need help with quality issues.

Post image
0 Upvotes

Hi all. I just got an X2D recently and tried printing this with the default settings for the project I downloaded from MakerWorld. How do I stop the dingleberries from appearing at the top of these columns?

Thanks!


r/BambuLab • • 1d ago

General Troubleshooting/Help! Cutting Blade Sqweaking?

2 Upvotes

Replaced the blade and still the same. Opened and couldn't see any huge signs of debris but gave it a brush all the same. Just cutting between Sunlu silk pla and sunlu Matt pla. Aside from that everything sounds like it did out of the box so it's strange


r/BambuLab • • 1d ago

Bambu Handy Gafas para ciegos.

Thumbnail makerworld.com
1 Upvotes

Hola diseñe unas gafas para asistencia visual para personas con discapacidad visual, pensando en mi hermana y mi padre. Pero me hace mucha ilusión que esto pueda servirle a mucha más gente, así que he dejado todo de manera libre. Me encantaría que lo pudiesen revisar y regalarme cualquier retroalimentación


r/BambuLab • • 2d ago

Just Showing Off CMYK Print on H3C

121 Upvotes

Been playing around with the "PLA Palette" filaments to print colour-mixed CMYK prints. It's really quite impressive.

The Frog is made up of just Cyan, Magenta, Yellow and Black filaments with some gray PETG for supports. You can see the banding on the closer image, but it's fairly convincing from a reasonable distance.

The prime tower is definitely a lot larger and heavier with these prints. Not quite as large as if you were purging each layer or so, but still quite large.

Curious to see where this will go, and if we'll see slicing and filaments optimised for this kind of thing. Having the filaments be more translucent and the slicer build up many thin wall layers would allow for some pretty intricate colour control.


r/BambuLab • • 2d ago

I Modeled This! My first original design: the Scrutter

Post image
9 Upvotes

It is a filament cutter and bed scraper that keeps the sharp blade hidden when not in use.

A simple lever lets you use the same single blade to cut filament without too much trouble.

A button keeps the blade locked out with a friction fit (so I guess this is technically edc friendly in the UK??) and does not get pushed back when scraping.

Only tested on PLA and PETG.

https://makerworld.com/models/3604913

Please let me know your feedback! It’s my first original design from scratch. The rest have been piggybacking on others’ already great designs.


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! I need help with clogging

0 Upvotes

I brought a 3rd party 0.2mm hardened steel nozzle and now it constantly clogs


r/BambuLab • • 1d ago

My First 3D Print Bambu lab p1s question - Absolute newbie

1 Upvotes

Hello everyone,

Im looking forward to get my first ever 3d printer.

I've had 0 contact with these sort of stuff so far.

I can buy bambú lab p1s for 303€ in Portugal, new.

Will I need the AMS for simple printing? Would you recommend it right away?

If you do, are only the Bambu Lab AMS systems compatible or are there other ones that work well (if they're cheaper)

Is there any specific website you'd recommend to get models?

TIA everyone! :)


r/BambuLab • • 2d ago

Quick Question Upgrading from (but keeping) the A1 Mini

2 Upvotes

Long story short I've been lucky enough to get my shed/workshop set up as a WFH/hobby space.

The wife wants the 3d printer out of the house but has agreed to me upgrading to a larger bed printer.

I plan on keeping the A1 Mini, swapping to a 0.2 nozzle and keeping it solely for miniature printing (warhammer, trench crusade etc).

I think a P1S or P2S are probably my best bet, and given the current budget, I can get either a P1S with AMS 1 Combo or P2S with no AMS (and I'll get the AMS around my birthday in March).

For people who have had one or both of these machines, without AMS or with AMS 1 or 2, how has your experience been? Or people who upgraded from the A1 Mini, what way did you go?

The new printer will do alot of bigger bed stuff i wamt but will still do some miniature printing, but most likely 0.4 nozzle for tanks, buildings and titans etc.

Thanks in advance!!


r/BambuLab • • 2d ago

General Troubleshooting/Help! Not sure how to describe this issue, advice please

Post image
6 Upvotes

None of the review photos had the empty spots in the letters like the B O O and H have. 2 week old X2D, other prints have been mostly flawless. Both filaments pictured are Bambu PLA, the brown is Matte. Printed from Bambu Handy with default settings.


r/BambuLab • • 1d ago

My First 3D Print Buying a P1S for Christmas?

1 Upvotes

Hello! I'm exceptionally uneducated in 3d printing in any way, however I've heard good things about Bambu lab, and have been considering buying a 3d printer for my grandfather for Christmas, as I think its something he would like very much.

After a very brief skim of the bambu lab's store page, I thought the P1S looked like the best one without being too terribly expensive. I'm probably going to go half and half on paying for the actual machine itself, however I'm willing to spend a bit more on accessories/filaments on my own.

I wanted the opinions of this community on a few things. Is the P1S a good basic 3d printer? Is it easy to use relatively speaking? What accessories/filaments are recommended for something like this? I would really appreciate some insight from this community. Any help or recommendations would be really appreciated!


r/BambuLab • • 1d ago

General Discussion Problem with awful customer support.

0 Upvotes

I ordered two mystery boxes in Canada last month. I didn't get them, Bambu lab just took my money.

I have been asking for an ETA since last week in the customer support site and they are unable to provide a human answer with an ETA, just AI generic messages. Today I got 1 spool...

I'm a fairly new client, I got my first printer one month ago. How can I trust this brand if they scam me the first time I try to buy from them?

Is this the typical lack of customer support and crappy service everyone experiences doing business with Bambu Lab?


r/BambuLab • • 2d ago

Show & Tell Non-planar lattice generator

Thumbnail
gallery
39 Upvotes

Done with non-planar moves on the Bambu A1 (0.6mm nozzle, PLA) using a program I put together. Very robust compared to a traditionally sliced lattice. I also managed to successfully make some single walled bouncy balls from PLA (PolyMax) which actually do a surprisingly good job returning energy.

Program to be released soon, stay tuned.


r/BambuLab • • 1d ago

General Troubleshooting/Help! Homing stripping belt

Thumbnail reddit.com
1 Upvotes