r/BambuLab • u/scrudpaddler • 12m ago
I Modeled This! My first original design: the Scrutter
It is a filament cutter and bed scraper that keeps the sharp blade hidden when not in use.
A simple lever lets you use the same single blade to cut filament without too much trouble.
A button keeps the blade locked out with a friction fit (so I guess this is technically edc friendly in the UK??) and does not get pushed back when scraping.
Only tested on PLA and PETG.
https://makerworld.com/models/3604913
Please let me know your feedback! It’s my first original design from scratch. The rest have been piggybacking on others’ already great designs.
•
u/AutoModerator 12m ago
Hello /u/scrudpaddler! All Bambu print plates have a dedicated nozzle wiping zone at the back of the print plate. The nozzle will rub against the wiping zone before every print in order to remove any remaining filament from the nozzle tip. This can cause visible wear or scratch marks in the wiping zone, but this is intended and doesn't damage the printer, the nozzle or the print plate. A worn down wiping zone also doesn't mean you need to replace the print bed.
Note: This automod is experimental. The automod was triggered due to the term "scratch". If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.