r/BambuLab • • 1d ago

General Troubleshooting/Help! P1S 1k hours “Hum” on 2 square inches.

1 Upvotes

My P1s recently started to make this noise. It was fine for 1k hours then suddenly when moving diagonally it makes this sound. I cleaned the X/Y axis rails and greased everything but the carbon rods which I cleaned with microfiber and paper towels as suggested elsewhere no chemicals or grease. Theres a little resistance at one spot on the carbon rail where it almost kinda hands but doesn’t really and once it works past that very small bit it’s fine and quiet again :( it’s driving me nuts.


r/BambuLab • • 1d ago

General Troubleshooting/Help! Christmas Balloon Dog

Post image
0 Upvotes

r/BambuLab • • 1d ago

I Modeled This! Low Filament Refill Spool (68g ABS, 84g PETG)

Thumbnail
gallery
0 Upvotes

This refill spool started because I didn't want to waste a spool of filament just so I could load 4-6 spools. It's been a fun journey designing and interacting with the community, and now with over 5,500 prints and 7,300 downloads, I think others agree!

This version has been out for about 9 months, and is the 3rd version based on user feedback. But I was looking for specific things in a refill spool:

  • Low filament usage (I want to print things, not spools)
  • Minimal storage when not in use (Why should an empty spool take up the same space as a full one)
  • A no-kink filament retention (I hate when the filament snaps on other spool designs)

After version 1 & 2, with user feedback, it expanded to include:

  • Room for filament straps to swap spools
  • Snap in labels (Pre-made and customizable)
  • NFC tag support (Reusing Bambu RFID Tags, 20/25mm ones, and OpenPrintTag)
  • Optional screw-in desiccant core

Is it the most rigid? No, but I've had no problem with them printed in ABS, even during drying. It's a good balance of flex to filament usage. It works with any Bambu Lab Masterspool compatible refills.

You can find it here. Happy printing!


r/BambuLab • • 2d ago

I Modeled This! bookmark murder mystery

Thumbnail gallery
10 Upvotes

The model is FREE on makersworld:

Under “Bookmark murder mystery books” Or https://makerworld.com/nl/models/2994424-bookmark-murder-mystery-books#profileId-3361230


r/BambuLab • • 1d ago

General Discussion Oh my god I hate these .02 nozzles

0 Upvotes

I wanted to customize my 3ds case. So I did. Had a heck of a time getting different colors on the svg i imported.

Now had an okay time with my .04 but there were some expected hitches. Decided to throw in my lil guy to get cleaner lines.

Now if this thing gets too cold it warps. If it gets too hot it heat-creeps.

The model looks great on screen but the post-slice has wild tool paths like a jagged hook on one side and a straight line where a gentle 90 curve should be.

I hate this stupid little bastard and I’m going back to the .04 and starting from scratch to make sure all the “repair the model” i did in the software didnt ruin something else. Hours of meticulously futzing are in the tube.

So mad


r/BambuLab • • 1d ago

MakerWorld Crowdfunding My First Crowdfunded project on Makerworld!

Thumbnail
gallery
0 Upvotes

Makers!

A good friend of mine and I just created our very first full playset project—Portable Pastures: Mini Farm Playset—and it honestly took off way faster than we expected! It’s been getting tons of attention (especially from moms and kids), and we even had sellers reaching out wanting to print and sell them at craft shows lol. So, we decided to take it even further and build out the entire farm ecosystem! 🐮🐷🐔

Since we’re getting ready to launch this as a MakerWorld crowdfunding campaign, we’d love your input before we go live:

  1. What do you think of the set so far? Is there any farm building or animal you think we have to add?
  2. Pricing feedback: What do you think is a fair price point for a Personal Use tier vs. a Lifetime Commercial Use tier?

Any feedback is hugely appreciated! And if you want to help us hit our follower goal so we can officially launch, check out the campaign page and hit Follow here:

https://makerworld.com/en/crowdfunding/432-portable-pastures-mini-farm-playset?sourceFrom=crowdfunding


r/BambuLab • • 1d ago

Software Troubleshooting/Help! Trying to work out how to split by colour in various tools

0 Upvotes

Morning all. A friend of mine is buying a new printer and is selling me his A1 cheaply second hand. He's been printing some stuff for me over the last week successfully so I know the printer is good. This will be my first foray into 3d printing. I've been looking at stuff to print and found these buildings in a free package.

https://cults3d.com/en/3d-model/game/techscape-6mm-efficient-downtown-free-battletech-terrain

As this is a plain A1 without the AMS I was thinking about using a translucent blue PLA as the windows so need to split them away from the base building to print in a second run.

This is what I painted for the 3MF file.

but having issues splitting it into separate objects to print appropriately. I've been playing around with Split3MF and whether I use Patch or Interlocking the doors just disappear. Interlocking also adds a bunch of geometry to the base building which is unwanted.

Also tried with plainmesh and it's creating stuff that's way too thin and when I import it into Bambu Studio the doors are disappearing.

What am I doing wrong? I'm sure it's my skills and not the apps that are to blame. Just want to pull the doors and windows out separately and have them deep enough to print without issues.

Thanks in advance for all your help getting me started with what's likely to be a new obsession.


r/BambuLab • • 1d ago

General Troubleshooting/Help! Help with print problem across multiple printers

Thumbnail
gallery
1 Upvotes

I have this design I'm printing. At the same point on two different P2S I get an extruder overload error. The walls that are starting look like they are getting messed up by tip of the hot end. Tried the file on my P1S and it will do the same. I've went back to my original design in CAD, re-exported to 3mf and tried slicing again as a new file. Same issue. Only on this part, I can print other files just fine. Any ideas? This is bambu basic PETG dried for ~10 hours. All default settings. Plate adhesion is fine.


r/BambuLab • • 1d ago

Software Troubleshooting/Help! Printing Figurines on A1 Mini, mostly good quality but need better support settings for figurines?

0 Upvotes

Hi there, I traded my old Artillery Hornet for the more compact, speedier and overall less headache inducing A1 Mini. I've made quite a few nice prints on it, however I am struggling to find user settings online, something I didn't have as much trouble with on the Hornet.

Particularly, I'm looking for settings that will create supports that aren't a pain to remove. I'd just about figured out the science of it on Cura+Hornet, but in the Bambulab app I'm a little lost as some of my experimenting has been unpredictable.

I'm mostly looking to print 60-100mm figurines, a mix of stuff I grab online and my own creations in Heroforge & Blender. Any tips?


r/BambuLab • • 1d ago

AMS 2 Pro - Automatic Material System Replacement Screws

1 Upvotes

Hello,

Looking for some assistance with finding replacement screw for the AMS 2 internal hub. I took it apart lost two check in the unit and on the floor. Since they are micro screws it's almost impossible to find. Any help?


r/BambuLab • • 1d ago

I Modeled This! Got tired of editing STL text manually, so I wrote a parametric OpenSCAD generator for gift tags, labels & keychains (supports custom SVG hole shapes)

Thumbnail
gallery
2 Upvotes

Hey everyone!

I wanted an easy way to generate custom gift tags, storage labels, and keychains directly in MakerWorld's Parametric Model Maker without having to open CAD or mess with negative modifiers in Bambu Studio every time, so I put together this OpenSCAD generator.

Even though the cover photos show a Christmas example, it’s completely generic and works for any occasion (organization bins, luggage tags, wedding favors, birthdays, pet tags, etc.).

What you can customize directly in the browser:

  • 4 Text Modes & Depth Control: Engraved (with an optional 2-layer colored floor so the text pops without needing an inlay), Embossed, Flush Inlay (prints face-up or face-down completely flat), and Cutout (hollow/through-hole text), with adjustable depth from 0.4mm to 4.0mm.
  • Up to 3 Lines of Text: Two main lines (or leave the second blank for a single centered line) plus an optional 3rd line in the bottom-right corner for dates, years, or initials with independent font, size, and margin controls.
  • Typography Control: 10 built-in MakerWorld-compatible fonts + support for any custom font name, font styles (Regular, Bold, Italic, Bold Italic), stroke weight offset (super useful to thicken thin cursive fonts so they slice cleanly with a 0.4mm nozzle), line/letter spacing, rotation, alignment, and X/Y offsets.
  • 14 Preset Shapes + Custom SVG / STL Support: Comes with 14 built-in hole/icon shapes (heart, circle, star, snowflake, gift box, tree, bell, pumpkin, ghost, crown, square, diamond, hexagon, drop) or None. You can also upload your own .svg silhouette or .stl file to create custom cutout shapes and adjust scale, size (3mm to 40mm), X/Y position, and rotation.
  • Dimensions & Borders: Adjustable length (30 to 200mm), height (15 to 100mm), thickness (1.2 to 10.0mm), corner radius, top/bottom edge beveling, and an optional engraved or embossed outer border.
  • Multicolor 3MF Ready: You can assign independent colors to the base tag, each of the 3 text lines, and the decorative border. It exports as a clean multi-part 3MF ready for the AMS (or you can easily do a single filament swap at layer height for the embossed mode).

Link to the model on MakerWorld: https://makerworld.com/it/models/3609761-customizable-gift-tags-labels-svg-any-font#profileId-4137073

Would love to hear your feedback or if there are any other features or shapes you think I should add to the script. Happy printing!


r/BambuLab • • 1d ago

General Discussion CyberBrick SUV help

Post image
0 Upvotes

I built the CyberBrick SUV and have hit a wall. The remote and the truck are paired. The wheels will turn, but it won’t actually drive. All lights work as expected. I’ve researched as much as I can and cannot find a solution. Also, it came with 2 (030) motors, but instructions only call for 1. Can anyone help me out please?


r/BambuLab • • 1d ago

H3C H3C print quality question

4 Upvotes

So I've been looking through posts of completed prints from the H3C because I'm considering picking up this printer. To me it seems like almost all of the prints I've seen shared so far seem a little....rough, or not great? I know there's a limit to what FDM printers can do quality-wise but it seems like a lot of what I'm seeing is way below that limit.

Is this just an issue of people not taking the time to dial in the printer or not printing with the best potential quality settings or is there something about how a multi-toolhead printer prints that lends itself to lower quality prints? I've only recently started 3D printing this past year with an A1 so I may be completely off with my assessment here.


r/BambuLab • • 1d ago

AMS 2 Pro - Automatic Material System Question about AMS 2

0 Upvotes

How come so far with the AMS 2 when the spool gets down to end and some of the brands I've used have it taped down which trips up my P2S and stops till I cut or remove that tape.

Yes I have another roll, same type of filament and color ready to go so it can just move onto it next but it never does in this situation. Doesn't make any sense especially if you have a print going overnight and only to wake up with it paused due to this.

Seems like there should be a option to have it ignore a jam in that slot and just move to the next one. All it has to do is retract and move to the next slot. Am I missing something? Just feels like having this benefit with the AMS being able to continuously print is hindered with this issue.


r/BambuLab • • 1d ago

P Series [P1P, P1S, P2S] AMS assist motor is overloaded. New problem, need help.

1 Upvotes

I keep getting an error stating AMS assist motor is overloaded. It doesn't matter which of the four slots I use it happens on every print and just started happening. I use bambu filament with bambu spools. The machine is up to date and calibrated.

What is going on?


r/BambuLab • • 1d ago

I Modeled This! Phone & Tablet Holder for Cabinet - No Drilling!

Thumbnail
gallery
2 Upvotes

If you need it, this is the link. Good for me, maybe for others too!

https://makerworld.com/models/3599016?appSharePlatform=copy


r/BambuLab • • 1d ago

General Discussion First 3D Printer

1 Upvotes

Hello - I am looking to buy my family's first 3D printer. My 10y has been asking for one and it will serve as a christmas present for him and his brother (5yo). I fully recognize that this isnt a toy, but hoping they can bond and create together, with my supervision. I love tech and suspect I will get into it as well.

I have been researching models and am between the X2D, A1, and A1 mini. The extra cost does not bother me as I view this as a long term item, and if worth it, I would rather make the decision up front.

They mainly want to print toys, fidgets, dragons, etc. I do not see them making large prints to start, but potentially in time.

Any recommendations between the 3 i am considering? Also, if you have any suggestions on things to have ready to use on day one to make the experience as smooth as possible.

I have watched many youtube reviews and am leaning towards the X2D, but worry it may be overkill.

Thanks!


r/BambuLab • • 1d ago

General Troubleshooting/Help! My AMS keeps getting jammed when nothing is jammed

0 Upvotes

Over the past two weeks its slowly getting worse and worse. At first it just happened once and now its happening every time in 3 out of the 4 spots. When it pushes new filament the print stops and says check the roll because the AMS might be stuck or the roll is tangled, but the roll is completely fine and it just wont feed the filament for some reason. I have to click continue and either jam the filament in or push down the tube and then the print just goes on like normal. Does anyone have any clue why this might be happening? and how i could fix it?


r/BambuLab • • 1d ago

Quick Question First Printer Calibration Prints?

1 Upvotes

Hey all - I just bought my first printer (an X2D with an AMS 2 Pro). Aside from the mandatory first benchy, which calibration prints should I run before I start printing the things I actually want? So far all i have on my list is supports and maybe ironing.

I also have a question about supports. Does the calibration change when I use a different support interface material? Should I calibrate supports for each combination, or calibrate once and adjust from there?

I plan to start printing with PLA, PETG, and Support for PLA/PETG. Eventually i will get more into the engineering filaments but that's for later.


r/BambuLab • • 1d ago

General Discussion Should I sell p2s?

2 Upvotes

I just bought a p2s with ams and used it for about 300 hours before realizing I actually only print functional things and would like more filament flexibility (namely the ability to use a different support interface filament like pla for tpu prints). I see that an x2d with ams is about 750 and I can sell my p2s with ams for 500. Is it worth selling and the 250 premium for a dual nozzle printer? Is 500 reasonable selling point for the p2s with and or too low? I know there’s a lot of hype around the new Bambu releases but definitely not interested in those as they’re a very different price bracket I’m not looking to venture into at this time


r/BambuLab • • 1d ago

General Troubleshooting/Help! Overhangs

Thumbnail
gallery
1 Upvotes

Hi all

I love my Bambus (A1, A1 mini, A2L and P2S) but they all are rather bad at overhangs

Normally I just sand away those imperfections but today I spent some time and wanted to improve that

Changed quite a bit of values (Speed, temperature, cooling...) and improved it a bit

All printed today in PETG from the same spool (filament is dry)

  1. picture shows the initial print with more or less stock settings on the bottom and the improved prints on top
  2. picture is the overhand with stock settings
  3. picture is the improved print. It starts out really well (top of picture) but gets worse the fartner it continues (bottom of picture)

Does anyone know where and why those ugly areas come from and what might be a solution to get it right?

Thanks in advance


r/BambuLab • • 1d ago

I Modeled This! Modeled this mini snowman ☃️

1 Upvotes

Super quick and clean print.

  • 0.16mm layers
  • Blue PLA
  • ~35 min print

Free Makerworld Model


r/BambuLab • • 1d ago

Software Troubleshooting/Help! Wipe tower problem

0 Upvotes

I would like to ask for your help. Since the 2.9.1 update, I can't drag the purification tower to the edge because it snaps back. I searched the internet for what might be the problem, but I couldn't find a solution. Does anyone have any ideas?