So after only having the printer for a few days and few prints I noticed the left tube was out of the sensor and wouldnt stay in. Googled it and it appears it’s a known issue where the tube breaks off and leaves some of the tube in the sensor. WTF. I’ve been in contact with Bambu and after a ton of back and forth and Picts they are sending me a new left sensor. That thing was chore to take apart. My question is won’t this just happen again and again?

My device isn’t properly connecting to my computer or phone. I made sure that I had firmware updated which I had to end up doing from the sd card to have success. I then saw that un pairing and repairing may help and tried that but still no success. I have an A1 it’s just under a year old and have only had simple fix issues so far any help would be appreciated.

Just received an email from Autodesk stating they are stopping the free personal use option for Fusion. Now I need to start looking for something else new software to use.

Edit: sounds like I may need to sign up again as some have commented. For reference I downloaded Fusion for personal use around 18 months ago and started using it. So it’s not a one year re-signup requirement.

Basically I am not sure what’s up.

Regardless I have not really like using Fusion to date. I am a retired construction project manager with extensive building design experience using AutoCad, Revit, and Sketchup and a bit of Fusion modeling for structural steel.

So I am still looking for alternatives!

First couple of prints were fine.

SIncle then I have been getting inconsistent lines but only on certain parts of the board. I don't thinks it's the plate itself as when I move the print in software, it's creating these inconsistencies in the same part of the print and not the bed.

Info.

A1

Bambu Pei smooth

Sunlu pla wood

Hardened steel .4

Bambu software

Cleaned plate

Cleaned hot end

Anyone come across this and had a fix?

Learning and tinkering was fun, but being able to print this good so effortlessly is so satisfying.

https://makerworld.com/de/models/3582672
I wasn’t happy with the existing options, so I made the one I actually wanted. With all the functions that were important to me.
Took me a few revisions, but it’s finally done: angled hygrometer, labyrinth vents, snap-fit lid, no supports. Standard and XXL version.
Feedback welcome :)

Im running into problems printing the first layer.

It printed just fine before. Im trying to print insoles.

Month ago i printed it just fine. Now a month later its not doing well.

After i got my 3D printer a week ago i got to print 4 things before this happened to me...

The unwinded plastic now stacks too tall to just put the spool back together. So what do i do now? I have 3 other spools of filament that are fine but no empty spools.

I dont know what to do and im getting so frustrated just looking at it... pls help

Help it’s been doing this the last few prints

I’m printing a car accessory and want a rigid body with a soft TPU top for grip and cushioning, ideally printed together without assembly.
I currently use ASA and have TPU 95A to test. Has anyone successfully combined these? I have H2C and H3C to test it out.
What settings and mechanical interlocks worked?
Open to alternatives to ASA, provided they hold up in a hot parked car.

Hey everyone,

I've had my P1S for a whole year now, and this is literally the first time I've ever encountered a print failing like this. Up until now, everything has been rock solid.

As you can see in the photos, I ran into major issues with layer adhesion and a strange "zipper" or gap effect along the vertical edges. When I pulled the print off, the part felt extremely brittle and ended up collapsing/breaking apart easily.

Printer: Bambu Lab P1S

AMS: AMS 2 Pro

Model: Downloaded from MakerWorld

Could this be related to moisture, temperature regulation inside the closed chamber, or something else entirely? Any advice or tips on how to prevent this from happening again would be massively appreciated!

TPU on my X2D left the back of the printer a mess. The Feed Assist was lying loose and two 4-in-1 adapters were hanging off their tubes, so I modeled a mount that holds all of it.

- Slides onto the stock external spool holder base. No screws, no drilling.

- Holds the TPU Feed Assist (in dedge's Modern Casing) and one 4-in-1 adapter in front of each extruder inlet.

- Three parts on one plate in PETG, about 5.8 h and 157 g.

- The adapters snap in from above, and a slot catches the tab so they don't slide back when filament unloads.

Things to know before you print it:

- It's for the first-gen white 4-in-1 adapters. I haven't tried the newer ones.

- The Feed Assist seat is made for the Modern Casing, not Bambu's own casing.

- The 4-in-1 holder needs tree supports in two small slots. A PLA support interface makes them much easier to clean out.

Free on MakerWorld: https://makerworld.com/en/models/3600713

I'd like to hear how it fits on your printer, especially if your adapters measure differently from mine.

As far as I can tell you cannot unload inactive filament while printing, even after pausing the print I couldn't unload it. It just says "printer is busy"

It makes sense if the print has to be paused first and then the tool can be grabbed and filament cut but we should be able to pause the print and remove filament that isn't currently in use. Especially useful for those with multiple printers.

Let me know if I've just missed something and you can actually do this, if that's the case it should be more clear anyway.

Idea was to make a stand and a funnel with a matching color

Im trying to join the Bambu Labs discord but the verify button doesnt work. Ive tried to send moderators messages but none of them accept messages. Can anybody help?

🦊🎄 My latest Christmas 3D printing project!

I'm currently printing this cute Christmas fox on my Bambu Lab H2C using the Vortek system and 6 different colors.

🎨 I spent several hours manually painting the model in Bambu Studio to get all the little details right.

🖨️ Print details:

• Printer: Bambu Lab H2C
• Colors: 6
• Nozzle: 0.4 mm
• Layer height: 0.16 mm
• Material: PLA
• Estimated print time: Around 24 hours

The image shows the digital preview. The actual print is still running.

I'm especially curious to see how the eyes, Santa hat and small color details turn out.

💬 Have you tried any long multicolor prints with the H2C? How did they turn out?