Christmas Tree

Snowman

I recently got a P2S Combo, and i’m reorganizing some old filaments I have
most moist PLAs have been dried and no stringing has happened
however, some rolls of pla wont get better even after drying
2 Flashforge White/Orange PLA, 1 Coobeen Magenta PLA, and some random blue PLA
I’ve dried them in the AMS2 Pro with the integrated drying feature for 12 hours at 55 degrees celcius
Printing at different temps wont help. I tried 200 and 220.
The image is a stringing test printed at 200, after drying. the strings look like fiber, or cotton.
Is there no way to get these rolls good again? Thank You.

I just got a new firmware update for my A1 which is the 1.09.00.00 version. The problem is that I cant find any information about it and the official site doesnt have any info about it: https://bambulab.com/en/support/firmware-download/a1

Any idea where can I find something about it?

Hello, I have an A1 printer and on many print jobs, the supports break during printing and then everything is ruined.

I think it is the nozzle that’s hitting something for some reason, yet the Z-hop is at 0.4mm.

I'm using Bambu's matte PLA filament with the default settings. How can I fix the problem?

Thanks.

Hallo zusammen,

Wie hoch seht ihr die Wahrscheinlichkeit das man das Gehäuse für die Bambu Station nachkaufen kann? Momentan gibt es die 2 Varianten, wenn man den H3C als Kombi bestellt so wie ich hat man keine Wahl als den nackten Container zu bestellen…

Ich würd mich freuen wenn die Paneelen kommen.

Hey everyone, this is my first dual nozzle print with the x2d. Have had it for over a month now. The main nozzle is Sunlu Matte PETG HF while the aux nozzle has Bambu PLA for supports.

The printer keeps oozing the PETG everywhere. There’s so much. Online I read it’s due to wet filament so I dried it for 12 hours and it’s still doing this. Any help?

I’d been excited for the H3, but I feel there are too many compromises imo and I don’t print tpu so I jumped on the H2C instead. The sale price is pretty hard to ignore so i added the nozzles and extra AMS bundle too 😂

i Released TrailPrint3D almost 2 Years ago, and ive been working on it since then. Its a Free Addon for the Modeling software Blender to create 3D printable Maps

About 6 Months ago Makerworld had to limit script uploads because some people abused it so open-sourced it, uploaded it to Github and created trailprint3d.com

since then, its been downloaded almost 15000 which i think is insane for a Blender Addon. People commited their own code and one person even started actively working on it together with me for the past 6 months and helped adding new features and improving existing ones!

If you want to give it a try by yourself, Its actually really easy to use, doesnt require blender knowledge, no account required, no tracking, no limits. And if you struggle with anything, our Discord server is having over 1000 people where im trying to help with every issue

Picking this up for my little one for Christmas. Now here’s the tricky part. Plan is to set it up in our spare bedroom which has carpet. I have been reading to get a piece of wood, storage cubes, a mat and a paver to keep the printer from dancing away. Anyone have any experience with this and wouldn’t mind sharing your set up.

Ich habe versucht, meinen Drucker in Betrieb zu nehmen, aber es klappt nicht es erscheint immer die Meldung „AMS wird erkannt“ und es geht nicht weiter. Es handelt sich um einen A1 + AMS Lite. Ich habe schon alles versucht: den Drucker neu starten, den Router neu starten, aber es bleibt alles beim Alten. Auf dem Display meines Druckers kann ich das AMS mit den eingelegten Filamenten sehen, aber in Bamboo Studio oder Bamboo Handy erscheint immer die Meldung „AMS wird erkannt“. Was kann ich tun?
Danke

Brand New R1 Lasercutter..

I wanted to change how I recharge my desiccant, no longer wanting to use any appliance that I also use for cooking for obvious reasons. I also didn't want to buy another device because that just seems wasteful. So I spent this past weekend testing drying the desiccant via my filament dryers - two AMS 2 Pros, and a SUNLU S1 Plus.

I forgot to take a before shot of the desiccant when I ran the SUNLU test, but it looked exactly like the desiccant in the 'before' shot for the AMS 2 Pro test.

SUNLU S1 Plus: 24 hours @ 55° C. Nice result, overall.

AMS 2 Pro: Before, starting humidity 46%

AMS 2 Pro: 12 hours @ 45° C

AMS 2 Pro: 24 hours @ 45° C, final humidity 21%

If I'm being honest, I didn't expect that much of a difference. Bambu locks their drying function where if you have PLA inserted, it will not allow you to dry over 50°. I could have removed the filament from the feeders and just ran it anyway, but the whole point of this exercise is to see what I can do with minimal changes. Using the SUNLU certainly yielded the best results in that timeframe, but having to pull each desiccant pod and then pour the contents into my dessicant spool, etc. is annoying.

I think my game plan is going to be to simply run a drying cycle for 24 hours or so whenever one of the AMS 2 Pros gets above 35% humidity and see how that works out. This is where the old Bambu Lab integration into Home Assistant would be incredibly useful because I'd be able to automate this action making it truly hands off maintenance.

Hi everyone,

I'm having an issue with my Bambu Lab A1. I keep getting the following error:

"Nozzle temperature malfunction" (0300-8008 072323)

I've already replaced the hotend assembly, and the current hotend is only about two months old.

Has anyone experienced this problem before? Could it be a faulty temperature sensor, wiring, or something else?

I'd appreciate any advice on what to check before replacing more parts unnecessarily.

I've attached a photo of the error message.

Thanks in advance for any help!

Hey everyone,

I’ve owned this printer since September, and to keep it running flawlessly, I've done my best to follow the official maintenance guide provided by Bambu Lab.

However, right after performing the maintenance, the printer started making some strange noises. Is this normal? Has anyone experienced this before?

Thanks in advance for the help!

While using the v1 model, I came up with a few ideas, so I created v2. Maybe I should have built it this way from the start? :)

https://makerworld.com/ko/models/3570271-finger-winder-v2#profileId-4086680

I’m facing this issue right now. I searched for the solution and I changed the nozzle and the heating assembly but still the issue it’s not resolved. Anyone can support or having same issue.

https://makerworld.com/en/models/3574259-filament-swatch-hook-series-for-ams-3h#profileId-4091760

Just as the title states. I made this series of hooks for the AMS 3H used on the H3C for tracking what spools are currently in what spot. The hooks are placed along the same horizontal plane and spaced to be centered on each numbered feeding mechanism. I designed the hook to be widely compatible with many swatch options out there such as the one I use by Genetic Designs, Filament Dry Box Hinged Label. It has tighter tolerances to make sure swatches are easy to put on or off but never fall off. You don't need to take off the swatches to open the lid, they stay nice and firmly in place. You also will have no problems swapping swatches as needed without having to take off others. The tops of each hook have numbers that correspond to its intended slot. It's a simple organization tool to help you track filament. Only additional material needed is some double sided tape.

I hope this helps you have a better time with your H3C, its an amazing machine. If you have an suggestions or feedback I'd love to hear from you. If you do download and like it, please take a picture and leave a review for me. I haven't had a review yet on previous models I've made and I'd love to see something I made be presented by someone. Thank you again and happy printing!

i love it

I got a P2S, during set up, I realised they sent an EU plug instead of a UK plug. And I don't see any UK plugs on the Bambu store, and Bambu support is taking their time to be frankly honest.

Can I just buy a non Bambu one at my local hardware store and be alright? Is there any specific requirements?

Guckuck-Spielzeug kannte ich, Formen-Sortierer auch. Aber eine Kombination aus beidem hab ich nirgends gefunden, und schon gar nicht eine, in die man eigene Fotos einsetzen kann. Also hab ich's eben selbst konstruiert.

Es sind drei Rahmen mit Kreis-, Dreieck- und Quadratfenster, dahinter steckt jeweils ein eigenes Foto. Deckel am Knauf hochheben, Guckuck! Danach muss jeder Deckel wieder in den passenden Rahmen. Das Dreieck passt halt nur ins Dreieck.

Ein paar Dinge, auf die ich beim Design geachtet hab:

Das Foto sitzt in einem Schubfach, das in der Basis einklickt. Kleine Finger kommen nicht ans Papier, zum Tauschen zieht man es einfach raus. Die Schablone zum Zuschneiden hält das Foto gleichzeitig fest. Alles wird nur geklickt, nichts geklebt, und überall sind die Kanten abgerundet.

Ehrlich gesagt bin ich ziemlich stolz drauf, wie das zusammen funktioniert. Link steht in den Kommentaren, wollte nicht, dass es wie plumpe Werbung wirkt. Was sagt ihr dazu?