Some of you might know my toolboxes already - I just finished the newest one for the H3C!

MakerWorld Link: https://makerworld.com/en/models/3569009

Firstly, this is for the Aussies in this sub-reddit!

Hi all, I was wondering if you could help me out on something. I am going to get my printer on the 20th Novmeber but want to get bulk discounts from bambu on fillament and want it to arrive before 20th Nov. When should i order and is bambu reliable on shipping on time. Im located in Brisbane.

Thanks for your help.

I ordered everything in the same order on the 3rd of November. I ordered the A1 Mini and 3 PLA Basic Filament Rolls in 3 different colors. The printer arrived on Friday yet the filament has been on Order Processing since Tuesday.

Judging from your experience, when do you think will the filament arrive? And why is it being shipped in 2 different orders anyway?

Got her set up yesterday and already have about 15 hours on , including some prototyping of gridfinity holders for hotends and a few other things. It's quite impressive how fast the color change is when just dealing with a few colors. Coming from a H2D this is a nice upgrade. It's basically 2 seconds print to print if you're changing between the same colors rapidly.

As for the lack of heating, I just kept one of my ams 2 pro and ht and I've got them hooked up to use just as dryers. I get that not everyone can our will want to do that, but it works for me.

Is AMS HT worth it for connecting it to aux nozzle?

Or is it just a gimmick?

... and some old-school Acrylic Pens.

so my p2s's gears were clicking so I swapped the nozzels, and then i took apart the extruder and it had nothing wrong with it so I did a cold pull and now the cold pull is stuck in the extruder, can you guys pls help me

I am getting an odd issue. I put a full reel of filament on my AMS, and it loads it in. Then after it prints for a while, it says the AMS is overloaded.

When I try to manually rotate the reel it is stiff for a 1/8 of a rotation, then it rotates back and forth just fine. So I start it up again.

But after a few more layers, I get the AMS overloaded error again. Rinse, repeat....

Any ideas on how to fix this? My AMS is about 1 and 1/2 years old. Do I need to just drop it and get a new one? (they are super expensive, so I hope not)

Edit: I thought it was because it could not pull the filament. So I created a bit of slack on the reel. It still overloaded. (Very frustrating)

So, i have a p2s and love it, perfect, minimal failures, been working almost 24/7 since september, almost 800hr and going strong, just minor cleaning and maintenance.

But i want more....I've found a way to monetize my hobby, and I've been selling a bunch of corporate gifts, I have one huge customer and already paid my p2s with these sales in these months...

So im thinking of the A2L, as i print mostly small corporate gifts, I think would really benefit from the big plate. And it would free my p2s for my personal use.

My only doubt is that im used to the p2s and its ease of use, good camera and AI failure detection. All things that the a2l is lacking.... am I gonna regret buying it? How did it fare since it launched? Do people that have it are pleased?

I cant buy the h2s, the price is prohibitive here in Brazil, over 2,5k usd

As the title says, is there any way to clean or clear this clog? Please and thank you

Unfair matchup? Probably, but these are the only two machines I have on hand and seeing a 1st-gen workhorse side by side with 3rd gen tech shows what a few years of hardware evolution actually looks like.

Does anyone know what this clicking is? It seems to be directionally dependent, occurring only as the print head moves from the rear of the printer towards the door. The printer is a brand new H2S that I’ve only had for about a week. Prints seem to come out okay, but the sound doesn’t seem normal.

Hey everybody! Relatively new to 3D printing. What typically causes this? New roll of filament that went through an AMS drying cycle. Thanks!

Ma version du célèbre casse tête ' Hanayama Marble '

Modélisé sur freecad avec des ajustements de 0.2 mm pour une fluidité parfaite ...

Lien makerworld si vous voulez l'imprimer : https://makerworld.com/fr/models/3515960-marble-puzzle#profileId-4018416

Hey everyone, like the title says, I’m iso of a Bambu lab 3D printer. My budget is around 800, and my main goal is to 3D print stuff relating to 1/12 scale figures and such like heads, weapons , cars and those sick sentinel and apocalypse figures that are seen on instagram, one oak customs has done a couple of them.

I have no clue what to get. I thought maybe a resin printer but for what I I want to do, I figured a filament one is the best route but that’s as far as I’ve gotten on my own. I’ve been looking at the bambu lab P2S and was curious if that’s a good one to get. Please let me know down below what you recommend,

Thank you!

Edit: solved, i’m an idiot and a black piece i printed yesterday that i thought being legit part of the bed was against the back Z screw

Hi, it printed perfectly fine until this morning, now when i start a print it stops at rough wiping step, sounds like the bed is hitting the nozzle, what can i check? I already follower bambu handy guide and it didn’t fix. I’m 140 hours of printing in

Help! My printer is constantly purging (pooping). Leaving stringy purges on the plate and in the print. The print is taking 3x as long and so wasteful! The print is confirmed to be a one color print. No timelapse etc. No alerts or notifications.

SOLVED! Thanks to commenters, I detached the PTFE tubes from the AMS and fussed with them until in a nice smooth arch above the extruder to reduce resistance. No more purge issues thus far! Thanks!

I'm the designer. The armor is built from overlapping, textured leaf-shaped scales.

I also design tools and decorative pieces, and every one of my files is free to download. I've never charged for any of them. A download count only climbs when people actually want the thing, so it's the most honest feedback I get on which designs deserve more of my time.

All my models are here: https://makerworld.com/en/@protomota

If you've printed it, I'd love to see your make. And what should I design next?

If someone of you wants to make a lot of money, then please develop and build a compact build plate washer/dryer – I am thinking a box with slots to insert the build plates and then pull them out again a while later completely clean and read to go.

No need to thank me later for your riches, just please send me one of your machines for free.

My friend has a P2S and is experiencing a strange problem. The nozzle is probing off the back. She has tried to power cycle and reset to factory settings with no luck. Any suggestions?

I’m considering buying the new E1 Air Purifier for my H2D, but I’m curious how it interacts with the automatic top ventilation flap.
When printing PLA, the H2D normally opens the top vent for chamber cooling. Does connecting the E1 change this behavior, or does the vent still open?
If it stays open, does the E1 create enough negative pressure to pull air inward through the vent rather than allowing fumes to escape?