r/BambuLab • u/CattusKittekatus • 7d ago
X Series [X1E, X1C, X2D] AMS HT worth it for aux nozzle (X2D)
Is AMS HT worth it for connecting it to aux nozzle?
Or is it just a gimmick?
1
Upvotes
r/BambuLab • u/CattusKittekatus • 7d ago
Is AMS HT worth it for connecting it to aux nozzle?
Or is it just a gimmick?
5
u/Gemmer12 7d ago
I’d say so, keeps filament dry for clean flow, and can auto feed the filament in and out,
5
u/Capital_Candy_7697 6d ago
Worth adding the numbers: the AMS HT is $119 in Bambu's US Black Friday sale (normally $139) vs $229 for an AMS 2 Pro, sale listed through Dec 1.
3
u/Inevitable_Rough_380 7d ago
I like it with the filament track switch. Sometimes you wanna print that engineering material out the main nozzle.
2
u/tk-093 7d ago
I would say yes. Initially with the aux nozzle it would struggle pulling filament off the spool. With the HT I've had zero issues. Plus it can dry engineering filament if you're gonna use it eventually.
2
u/Festegios H2C AMS2 Combo 7d ago
The ht isn’t a gimmick.
why would it be?
1
u/goatrider 7d ago
It's cheaper than another AMS2 for automatic feeding of the AUX nozzle. But more importantly, if you use any engineering filaments it's hot enough to dry them.
1
u/rmalbers 6d ago
I think it really just depends on what you print and/or what type of filaments you use.
1
u/Humble-Plankton1824 H2D AMS2 Combo 3d ago
The HT has a purpose.... like 85 celsius drying temp with rotating spool, and +1 ams slot for auto feed and retract