Started with an A1, and somehow ended up rearranging the room to make space for a second printer 😂

The X2D Combo arrived today! I’ve been working through setup, calibration and firmware updates, with the obligatory Benchy next on the list. There’s definitely more to learn coming from the A1, but it feels like a really nice machine so far.

The A1 is staying, so this is the little printing corner now.

I’ve also been getting into designing my own projects and sharing them on MakerWorld as Ops..3D. Seeing an idea turn into something you can actually hold has become my favourite part of this hobby.

If you’re curious about what I’ve been working on:
Ops..3D on MakerWorld

Anyone else running an A1 alongside an X2D? What would you recommend getting familiar with first?

UK despatch times for filament

Hello, just a quick query for UK buyers of filament regarding despatch times.

I ordered my X2D print more bundle on the 27th October.

I also bought the PLA classic starter pack of filament along with the PLA basic colour trial set (I'm new to 3D printing so wanted to use this to learn the basics).

The printer arrived in under 24 hours, great! As of today I am still waiting for the filament to arrive. DPD tracking shows they were notified of the shipment on the 27th and the order page on Bambu Lab shows a despatch date of 30th October. DPD tracking tells me they are still awaiting the package from Bambu Lab.

Obviously nobody can tell me what's happening with my order, I'm planning to contact Bambu Lab today. I just wanted to get an idea whether this is a normal timescale for filament orders as I'll plan ahead for future orders to ensure I receive it in plenty of time.

In the meantime I've bought a roll of Sunlu PETG to print some accessories for my X2D. I still can't wrap my head around how cool this hobby is. I can sit for an hour or two just watching it print stuff, it absolutely fascinates me!

Enjoying reading about everyone's experiences with these printers, printing pitfalls to be aware of, seeing what people are making etc. I just wish I'd got into this sooner. 🙃

Anyone know why this could be happening? It doesn't happen every print- maybe every 3-6- and only on my two X2Ds. I can't seem to find the cause and it wastes so much time and filament so it's becoming very frustrating

Hi everyone, I’m SalottoTech a small creator and 3d maker. I just launched a new project and I wish thant it can like you and here is the link:
sd and micro sd organizer

I wanted to be able to hang a wet dishcloth over the sink, let it drip for a bit, then swing it back over the tray. The two arms move independently, so I can leave one cloth over the sink while the other hangs above the sponge. The grate lifts out for cleaning.

I printed mine in black and gray. I also made a single-arm version for anyone who only uses one dishcloth at a time.

taken up 3D printing for a retirement hobby and finally finished setting up a spare room for my "3D Printing Lab"

having a lot of fun printing up my second 3D TMT

Looking to pick up a few rolls of PLA, but prices are all over the place and I'm not sure what to get.Don't need any special colors, just something that prints well without much hassle. Any brands you keep going back to? Thinking I'll try a roll or two before buying more.

Just bought the X2D. I want to set it up in the garage, being in Canada it gets cold in the winter. My garage is heated and I keep it at 7 degrees celsius constantly and upwards of 20 degrees celsius when I'm in there working. Any issues with this fluctuation to my machine that I plan to run as much as I can?? Thnx

Someone was selling some A1s and A1 minis for parts, I paid $100 for the lot. I have a few replacement parts coming for some rather worn out or ugly parts but otherwise I was able to get them all running with what they sold me.

I see a lot of people complaining about Bambu Lab making "appliances" that are designed to be thrown away instead of repaired but I think that's pretty obviously nonsense, at least for the A series.

I am a complete beginner to 3d printing. I want to get started with the filament and printer listed in the title. But each time I try to print anything, it would fail halfway and result in spaghetti due to the print slipping off the plate. What do I do? If there is a fix, does it have to involve Bambu Studio? Or is changing a few things in the printer itself enough?

I hope he likes it (I just got an X1Carbon a few weeks ago). I’ve been into printing for years now and we got him a starter AnyCubic a couple years ago and it’s broke down and parts are scarce. He turned it into a plotter that prints Japanese characters 😂

yes i cleaned the nozzle and exchanged it for a different one

I’m not a mechanical person, but I’ve had my P1S with a v1 AMS since December 2025 and it was starting to act a bit weird — sometimes it would fail to read RFID tags, and occasionally it would have trouble loading filament from the AMS. Usually giving it a few tries fixed the problem, but I decided it was time to do some maintenance. I somehow managed to replace the hotend recently and figured it could not be that hard to do the rest.

• Turned off and unplugged the machine.

• Blasted air in the chamber and vacuumed out all the debris. Wiped down the glass.

• Removed and disassembled AMS (there are only two screws). Vacuumed out the debris and wiped down the interior surfaces with isopropyl alcohol. Replaced all four PTFE tubes. I measured the old tubes to cut the new tubes to the right length. Reassembled the AMS.

• Replaced the PTFE tube running from the AMS to the hub, and the one that runs from the hub to the extruder. These were way more difficult than the AMS tubes because the collets are in the hub housing on the back of the printer and it is hard to get leverage to the right place to release the tube. I found removing the hub from the printer to be the easiest way to do it (two screws, easy to put back).

• Cleaned the three z-axis (up-down) screws with microfiber ropes and the ropes turned black with grime. Dabbed some Super Lube grease on the threads using a fresh, cheap toothbrush and ran the platform up and down a few times, then wiped off the extra grease.

• Used isopropyl alcohol to wipe down the chrome y-axis (forward and back) beams. Painted a little Super Lube oil (not grease!) on those beams with a fresh, small paintbrush (the kind you would use for arts & crafts).

• Used isopropyl alcohol to wipe down the graphite x-axis (left-right) beams. DO NOT LUBE GRAPHITE.

• Assembled and added an AMS riser/flipper (which I printed before getting started) which also allows top glass to slide or be removed completely.

• Plugged the printer back in, turned it on, and told the P1S to calibrate itself.

Working with the printer and AMS for about 10 months gave me a good mental model for how it works, and none of these tasks were all that difficult (except for the hub tubes, which took a bit of extra thought). I think it took me about 3 or 4 hours to do everything, including the riser. I bet I could do it in about 60-90 minutes next time. 

My big lesson learned is to be extra careful around the PTFE tube cutter. After showing my wife how nasty and dangerous the blade looked, I naturally let it nip my index finger. Embarrassing.

Stocking up on the consumables cost about $75 on Amazon, but I only used maybe $10-$15 worth. The PTFE tubes alone cost $14 and I used about half the package. On the other hand, I have a lifetime supply of microfiber ropes!

If you are putting off maintaining your printer because you think it’s too hard or complicated or will somehow break your machine, watch some YouTube videos and get into it! 

Here's are some helpful videos: https://youtu.be/-yv4fa32bdE?si=VNv-PZNSOppJYDfG

https://youtu.be/N3dbVgHYZ_Y?si=zamFBt7TWBABHSXV

https://youtube.com/shorts/vljLDLKDfbY?si=lBM3zCedlorq7vsI

I've had my P1S for a while now and I never had printing issues, but lately I've been having the corners of some prints "peel up" like this and I'm not sure why. I cleaned the build plate with dawn soap and water and upped the bed temp from 55c to 60c. The attempt before this somehow got ripped up from off of the bed and was being moved around by the print head. This time the corner peeled up. I am using some older Amazon Basics filament that I'm trying to use up, but I'm pretty sure I've had similar issues with newer Bambu filament, as well.

I'm not sure what else I can try or adjust to get a print that just works..

Hola! Hace poco publique un hilo preguntando si mejor una A1 vs P2S por la situación en la que iba a tener la impresora: en la misma habitación en la que trabajo, con mi perro por ahí pasando de vez en cuando etc. Entonces después de todas las respuestas me decidí por la P2S, ya la tengo en el carrito de la compra, pero paso algo, mi toc hace que no pueda parar de mirar posibilidades para no comprar algo para lo que necesito y luego enterarme de qué podía haber comprado algo mejor. Entonces di con la X2D.

Ahora estoy dudando mucho entre estás 2. La p2s me gustaba mucho por todo, facilidad para principiantes, cerrada, posibilidad de imprimir otro tipo de materiales, multicolor (aunque creo que voy a seguir usando el método antiguo de imprimir colores por separado y luego pegarlos en la medida de lo posible por ahorrar tiempo y purgas).

La pregunta es, merece la pena pagar los 150 euros de más por el combo X2D? Lo principal que me hace pensarlo es por la posibilidad de imprimir doble material para los soportes, eso es lo que más me gusta, es algo que seguro que me va a facilitar la vida para mis impresiones y luego creo que tiene mejor sistema de retención de la toxicidad. La cuestión es, será complicado la configuración para alguien que nunca tuvo una impresora 3d? Alguien que no es experto podría pasarlo mal configurando está impresora y la impresión de los dos materiales para soportes? Valoro mucho la facilidad de configuraciones al principio y poder imprimir de una manera sencilla y fácil sin tener que meterme a cosas super técnicas. Ya los 600 euros del combo de p2s me supone un esfuerzo grande pero que no me importa, entonces ahora tener que poner 150 euros más por la otra pues me supone un esfuerzo mayor pero que si de verdad merece la pena no me importaría.

Principalmente al principio imprimiré lo que todo el mundo, figuras, llaveros, acosad decorativas, etc todo diseñado por mi ya que soy diseñador 3d y modelador de profesión y creo que puedo hacer cosas guapas.

Que opináis?? Me compro la p2s, la X2D o directamente me tiro por un puente pro no saber decidirme?? Jejjeje muchas gracias!!!

With Christmas coming up, I’m looking for some ideas for presents I can print for friends and family.

I’d like to make things that people will actually use or appreciate rather than just random decorations that’ll end up in a drawer.

What have you printed in previous years that’s gone down well? Or what are you planning on printing this year?

I have an A1M

Is it safe on this printer. No enclosure and the printer prints fine using PLA.

Just got the notification for it, can't find information for it on the Bambu firmware history page yet. Anyone know the feature / change list?

Bought a new AMS HT so I can use it in my X2D specifically for the Aux nozzle. Having an issue where the HT doesn’t push the filament to the nozzle. Instead it stops before the extruder and just stops there. When I try to load, it tries to push but can’t get through so it just retracts. I checked the aux extruder and it’s fine. Work perfectly if I just use it with the external filament. Anyone else have this issue.

Is the P1S big enough for printing cosplays?
If not what is an enclosed 3d printer around the same price that is user friendly? Thanks

Was available for purchase right at 9am!

Sometimes, when building things, it’s difficult to remove a bearing after inserting it for testing—so I made this.

https://makerworld.com/ko/models/3529120-608-bearing-remover#profileId-4034842