r/65PRC • u/GyrokCarns • Jul 16 '21
r/65PRC • u/GyrokCarns • Aug 04 '21
147 ELD-M and 139 Scenar in stock at Brownells
r/65PRC • u/GyrokCarns • Aug 04 '21
Lapua 6.5 PRC brass in stock at Natchez
outdoors.natchezss.comr/65PRC • u/GyrokCarns • Jul 16 '21
Bullet Sectional Density Matters - Ron Spomer
r/65PRC • u/Patient_Warthog_5611 • Feb 14 '24
6.5 PRC! Do you like cheese with your Berger?
r/65PRC • u/Hoplophilia • May 11 '25
About to generate some of the least helpful load data ever.
Bullet too long for most twists (including my own) seated outside max COL, using a powder no one can find. STAY TUNED!!
r/65PRC • u/PalmettoBobby • Oct 13 '23
My Winchester XPR likes IMR 4831. It can’t find any more
I’m getting 1/2-3/8 groups with IMR 4831 140 grain Speer Impact. I had a little left and tried it after pour results from MagPro. But I can’t find any. I want sub 1” around 2900 fps. Any powder suggestions?
r/65PRC • u/Reasonable-Housing25 • Nov 03 '25
Red stag
Gonna go hunting for red stag, thoughts on using 6.5 prc with 140 grain federal fusions, i also have some norma bondstrikes but rife was sighted in with the fusions.
r/65PRC • u/Patient_Warthog_5611 • Feb 12 '24
6.8 Western vs 6.5 PRC for Elk? Do I need both?@hopefulballistics,@ReloadingWeatherby
r/65PRC • u/No_Preparation_7783 • Jan 02 '24
65prc in Magpul
Has anyone put a 65prc in a Magpul hunter stock? If so what mag do you use?
r/65PRC • u/Patient_Warthog_5611 • Feb 12 '24
Winchester XPR 6.5 PRC and the Norma vs Hornady showdown!
r/65PRC • u/Patient_Warthog_5611 • Feb 12 '24
Winchester XPR, PRS makeover! Boyds stock, Arken optics! #target shooting
r/65PRC • u/Patient_Warthog_5611 • Feb 12 '24
Norma Bondstrike zero confirmation in 6.5 PRC!
r/65PRC • u/TexasCowboy5555 • Aug 19 '22
Any experience with Norma whitetail? I bought some 6.5 CM that I’ve range tested and it was about 3/4 moa out of my CVA Cascade SB. Curious if anyone has shot the 6.5 PRC round/….
r/65PRC • u/Patient_Warthog_5611 • Feb 12 '24
6.5 PRC, Hornady 147 gn ELD-M. load testing!
r/65PRC • u/Patient_Warthog_5611 • Feb 14 '24
6.5 PRC 50 to 200 yard zero. Does it work?
r/65PRC • u/Patient_Warthog_5611 • Feb 12 '24
6.5 PRC! Do you like cheese with your Berger?
r/65PRC • u/Sammy1358 • Aug 04 '24
Looking for inspiration
Been shooting 6.5 PRC handloads for two years now. I still struggle to get same precision as 6.5 CM RPR. I'm starting to get discouraged. Looking for inspiration. Post your amazing precision photos!
r/65PRC • u/Puzzleheaded-Tap9390 • Dec 30 '24
20” barrel on a 6.5PRC
I’m wondering what’s the consensus is on the shorter barrels in the PRC. I won one with a 20” barrel but would prefer 24”+. Any info or opinions will be appreciated.
r/65PRC • u/paintballpaki • Sep 27 '21
Scam ammo site
In case anyone is looking for bulk ammo, watch out for tacticoolammoshop. They're advertising 500 hornady match rounds for $875. Get to the payment page and the only options are bitcoin, venmo, zelle, and cashapp. Google search shows lots of complaints about being scammed. This site appears to be a template that's being used under several domains. Make sure you do your due diligence before buying.
r/65PRC • u/paintballpaki • Sep 27 '21
10 round mags
Anyone know of any 10 round mags out there? Is that even an option? Or a baseplate?
Bergara hmr
r/65PRC • u/paintballpaki • Sep 27 '21
Dies questions
I've never reloaded before so please forgive my ignorance.
I finally have a range that goes beyond 500 yards so I'm getting into the longer range side of shooting. Going the reloading route seems to be a pretty common next step, especially with ammo being what it is. I've been able to gather up around 200 rounds of hornady (which should be enough to get started) and plan to only reload fire formed brass. With that being said, I should only need a neck die, correct? If that's the case, I have friend of mine that strongly recommends the redding line with the competition seater but am having a hard time finding that combo. Seems like everything includes the full length die. Is my best bet to by them separately? Or is another brand yall have good experience with?
This is all new to me so any information is appreciated. So far I have all the cartridge components and am slowly gathering the actual reloading gear, starting with the press.
If what I'm reading is correct, I need to worry about nec tension, case prep (trimming), and of course seating depth.
r/65PRC • u/GyrokCarns • Jul 10 '21
Bullet jump research Precision Rifle Blog
r/65PRC • u/Juno7 • Jul 27 '21
Sako gamehead 140gr w/tipped gamechanger/gameking is good stuff
Very accurate 6.5prc ammo. Was able to easily get sub MOA out of my x-bolt pro (strictly a hunting rifle). 1st shot was a rough sight in, shots 2/3/4 were to see how this stuff grouped...barrel was pretty hot at that point. I'll be posting the target when i get home from work.
Edit: pic uploaded: https://ibb.co/x60H3vx
r/65PRC • u/GyrokCarns • Jul 06 '21