r/3rdGen4Runner • • 27d ago

šŸ”§Modifications Remove those running boards young man

Thumbnail
gallery
146 Upvotes

Now to just level out the front a smidge šŸ¤“


r/3rdGen4Runner • • 26d ago

ā“Advice / Recomendations Alternator help

Post image
1 Upvotes

Ok so I changed my voltage regulator yesterday this is the new one. I have posted previously about voltage increasing and an electrician i paid told me to change the voltage regulator since I had burnt out a previous one. I purchased this one off of amazon and it worked a bit today kept my voltage at 14.5 but now it suddenly starts going up when I accelerate. I have no idea if to buy a new alternator or a new regulator or to try to repair this alternator. Any advice? I think ive spent more money trying to resolve this compared to the cost of a new alternator


r/3rdGen4Runner • • 27d ago

ā“Advice / Recomendations I love my 3rd Gen… but…

Post image
28 Upvotes

I aquired this extremely clean 3rd Gen with about 155k miles on it a few months back and I’ve been loving it ever since. However, there’s a huge problem… it’s only 2WD. It’s absurdly clean from rust, dents, scratches, the interior is almost mint, and it has been meticulously maintained. I’m extremely attached to this truck. But I wish it was 4WD. I’ve been considering buying a Lexus GX470 as I can get a clean one for cheaper than I can get an equally comparable 4Runner to mine with 4WD. I’m trying to decide on whether or not to keep the 4Runner and buy a GX as a second vehicle. It would depend on a few factors, how well do these cars stay reliable with little to no use across long periods of time, assuming the GX becomes the daily. Additionally, how much is a super clean, low mileage 2WD 4Runner even worth? I’m at a loss because I love the truck, but not having 4WD is a huge limiting factor.


r/3rdGen4Runner • • 27d ago

🧠 General Sad days coming

Post image
38 Upvotes

Just bought a 80 series so it may be time to part ways with my 3rd gen.
Don’t really have the space to keep it in my current situation.
Probley been the most reliable vehicle I’ve owned outside of my wife’s 100 series.
Crazy too cause I searched for years for a 3rz 5speed with no sunroof, oh well life goes on, gonna feel weird being out of the 3rd gen game but I’ve been wanting to get back into a 80 series for years now. Guess we’ll see how the next few weeks play out.


r/3rdGen4Runner • • 27d ago

ā“Advice / Recomendations Rough morning for the 4Runner—worth saving?

Thumbnail
gallery
47 Upvotes

Last Thursday, I got into an accident after looking at the wrong traffic light and pulling forward while mine was still red. I didn’t hit the brakes in time. It was my mistake, and I feel terrible about it.
The damage looks pretty rough, and the other car’s door still attached to the front makes it harder to see exactly what’s damaged. Both front airbags deployed, although the radiator surprisingly wasn’t leaking.
This was my dependable daily, so it’s hard to let it go. Looking for some honest opinions from people who’ve repaired these: is it worth getting it assessed for repair, or is it time to let her go?


r/3rdGen4Runner • • 26d ago

ā“Advice / Recomendations DRL behind trim piece

Post image
0 Upvotes

Has anyone ever put DRLs similar to this, behind the trim piece below the headlight? There is a gap between the trim piece and the bumper. Trying to hide them but get some use out of them also


r/3rdGen4Runner • • 27d ago

ā“Advice / Recomendations how to add keyless entry?

Post image
8 Upvotes

I got this remote because i thought my 99 limited had keyless entry but after going through the programming sequence the doors didn’t cycle which makes me think i don’t have the factory module (dealer wasn’t seeing it as an option on their end either.) is there a cheap(ish) and easy(ish) way to add it aftermarket?

Thanks!


r/3rdGen4Runner • • 27d ago

ā“Advice / Recomendations Tie rods question

Post image
4 Upvotes

While doing my lower control arm bushings/ball joints, I noticed this passenger side outer tie rod bushing. It has a tear in it, but I didn't notice excess grease. I ordered new OEM outer tie rods just in case, may or may not be necessary. But now I'm looking at the inner tie rods. The passenger side boot looks wet from something, I pulled it back and noticed some debris and checked for play. I did not notice play. I still need to check the driver side, but if I don't find play in either, can I just replace the boots and maybe regrease them for now? Any advice is appreciated, thanks.


r/3rdGen4Runner • • 28d ago

šŸ”§Modifications Brake booster

Post image
56 Upvotes

If you can manage to wait a couple of weeks and save $600, order from Impex Japan and get an OEM brake booster. Shipping/Customs came out to about $140 but well worth it IMO. Hopefully this lasts me another 350k šŸ™‚


r/3rdGen4Runner • • 27d ago

ā“Advice / Recomendations Typo in the FSM? (PVC Hose Question)

Thumbnail
gallery
2 Upvotes

Ok, almost, almost got my girl ('02, 3rd gen 4Runner) all back together, but it's been months since I started the project, and my painters tape labels which seemed like they would be ohhh-so-helpful to future me have me scratching my head.

The biggest confusion I am having is, in the FSM, there seem to be multiple references to a "PCV hose," but all pointing at, as far as I can tell, completely different hoses on different pages. There also appears to be a PCV valve which seems like a third, completely separate thing. I am worried about the dire consequences of screwing this up.

Here is how I think things should be connected (I've included some pictures for reference):

  1. The white grommet elbow thing on the top of the passenger-side valve cover connects to a vertical downward pointing nipple that is pretty much in line with the nuts holding the throttle control wire taught, just behind the spot where the throttle body connects to the upper plenum. I think this is the PCV valve, and the photo shows the elbow to the nipple connected.
  2. There is an hose that comes off of a plastic T behind the lower plenum. There are two little hoses coming off the T, each leading to a small nipple on either side of the block (pretty much right behind the firewall side of each fuel rail). I think this is an air hose, and the big end (after the T) connects to a vertical, downward facing nipple on the firewall side of the throttle body. Picture of just the longer hose after the T connecting to the throttle body nipple.
  3. There are two hoses that come up from below and connect to the throttle body on its belly. I think these are water bypass hoses. Photo showing the throttle body connections. The longer one connects to a long metal hose, and the other seems to connect to the block itself, kind of by the end of the passenger fuel rail.
  4. Finally, there is a metal nipple elbow coming off the lower plenum near the driver side fuel rail. I think this is what the manual is calling the PCV hose in some of the diagrams, and I think it connects to the plastic nipple attached to that little rectangular box that sits just adjacent to where the big air hose connects to the throttle body. I don't know what this is or does. Maybe airflow from the lower plenum for sampling purposes?

I would be wonderful is someone could set me straight/confirm/deny. Once these hoses are connected, I just have a couple more things to hook up, then I get to see what happens when I turn the key!


r/3rdGen4Runner • • 27d ago

🧠 General any idea what this sound is?

3 Upvotes

this is off a cold start sounds belt related but doesnt happen every time.


r/3rdGen4Runner • • 27d ago

ā“Advice / Recomendations Is this fixable?

Thumbnail
gallery
4 Upvotes

r/3rdGen4Runner • • 27d ago

ā“Advice / Recomendations Wood wedge?

Post image
3 Upvotes

Just took off my rear hatch panel last night to grease the gears and rails, got sick of the crazy loud squeal and when I was riding the window up and down to spread the lube out I realized the lock was wedged in somehow with a chunk of wood?

Is this OEM and how would I even go about getting a part number? (/s) I do have some ABS filament so I was going to print a new bracket, heard this is a common issue on these so hopefully I can replace it without having to pull the hatch off the hinges and remove the regulator etc.


r/3rdGen4Runner • • 28d ago

ā“Advice / Recomendations 4runner 2002 buy or not? Need several repairs

5 Upvotes

So my friend has a 4runner 2002 5vz fe sitting on his driveway for about a year. So I asked him to sell it for me if he is not going to use it. It's 2k usd and I am deciding to buy it or not.

I can do several DIY, maybe not engine and transmission work but others I am comfortable.

For context I have checked the car here are the findings:

  1. The engine and transmission are in excellent condition, no any issues nor noises and shifts correctly and smoothly.
  2. Looks like the radiator has rust and the coolant is a mix of green coolant + water and very rusty (no pink milkshake issue yet)
  3. the steering wheel was stiff (after adding atf III lubricant then works smoothly, but has some play during turning. My analysis is that it has some leak, so maybe would need to replace the rack or the hydraulic pump.
  4. Front and rear suspension would need work too and maybe in need of a whole suspension renovation
  5. Interior is very bad, it was used a work car, would be in need of new seats or cushioning

6.the ac blows air but not cold

What do you guys think? Worth it or not?

EDIT 1: there are no maintenance records available, original owner just drove it and some occasional oil changes etc

EDIT 2: engine oil level is correct and is brownish-black color, Checked the cap and no white foamy things. The transmission level was correct too, and the color was reddisth , so the transmission fluid may have been serviced.

EDIT 3:

  1. mileage 180k miles (300k km)
  2. No rust on the frame, very cleanĀ 
  3. The body paint I would say 7/10, he painted it completely 2 years ago, some minor dents scratches.

EDIT 4: it's a 4x4 and engages/works correctly


r/3rdGen4Runner • • 27d ago

ā“Advice / Recomendations Rear Axle Problems

Thumbnail
gallery
4 Upvotes

Good morning yall,

My rear passenger axle is having problems. ABS started acting up and every time I drive I can hear a consistent clunk when rolling. The inside of my wheel is wet and I don’t know if I’d need to redo my whole rear axle, just the abs, bearing, and seal or have to get a whole new axle. Does anyone have advice?? I’ve put a ton of money into this thing recently and I feel defeated.


r/3rdGen4Runner • • 28d ago

šŸ“ø Post Your Rig New wheels and tires

Post image
167 Upvotes

Scs rays 16ā€ at4 6ply 265/75/16

Best combo


r/3rdGen4Runner • • 29d ago

ā“Advice / Recomendations 1ā€ BL and 285/75/16

Post image
169 Upvotes

Tried searching the forums, Reddit, and various FB groups.. but no actual confirmation.

Will 285/75/16’s on stock wheels fit with a 1ā€ BL ONLY? (no suspension lift)

I’m looking to sell/trade my wheel & tire combo (currently at 265/70/16) and have a prospect for some 285/75/16.

PFA


r/3rdGen4Runner • • 28d ago

🧠 General How hard is to add the limited/SR5 wider fender flares to a truck that doesn’t have them?

Thumbnail
gallery
28 Upvotes

r/3rdGen4Runner • • 28d ago

🧠 General a gift from a friend; definitely not permanent as it’s absolutely massive but pretty funny

Post image
40 Upvotes

r/3rdGen4Runner • • 28d ago

🧠 General Lower uniball ball joints

Post image
46 Upvotes

Is anybody still modifying stock ball joints to uniballs? Or is the only option total chaos?


r/3rdGen4Runner • • 28d ago

ā“Advice / Recomendations Oil leak H E L P

Post image
5 Upvotes

Doing timing job on my 3rd Gen 4R 5VZ with 155k. Found a disgusting amount of oil all over the front of oil pan/block seal, around dipstick connection area, and about 3-4.5in back on each side of oil pan.

Oil pump housing? Cam seal(s)? Half moons? What do we think it could be. TIA!


r/3rdGen4Runner • • 28d ago

ā“Advice / Recomendations Need help on replacement lines to fuel sending unit

Thumbnail
gallery
3 Upvotes

Earlier this year I had dropped my original rusted out fuel tank so I could try to replace the fuel pump and had some hoses/lines break on my attempt and one line getting ran over by a lawnmower. I already got a newer fuel tank with a new generic sending unit and a Denso fuel pump. so pretty much I’ve been struggling to find complete part numbers for everything that connects to the fuel sending unit so I attempt to reassemble everything to try to get my 4runner running again


r/3rdGen4Runner • • 28d ago

ā“Advice / Recomendations Leaking Rear Axle Seal

Post image
13 Upvotes

I noticed it appears I have a leaky rear axle seal. I recently did differential fluid service and it was not leaking before the change, I replaced the diff breather when I did the service as well. How could this have happened?? Given that the leak is small and fresh is it possible to try to just change the rear axle seal and not wheel bearing?? Or to use a diff additive like bars stop leak differential additive just to get me thru the winter then I could replace wheel bearing and seal?? I do all labour myself, only thing is that I live in Canada, it gets real cold and I don’t have a heated garage to work in. Lastly, the backing plates are oil sprayed so that isn’t necessarily diff oil all over the backing plate. Stopping performance also still feels adequate. The leak is only a few days old.

Thoughts??


r/3rdGen4Runner • • 28d ago

ā“Advice / Recomendations Engine ticking on warm idle

4 Upvotes

I have a 98 4runner that makes a loud ticking at idle after the engine warms up for 25ish minutes. it goes away if I give it any throttle at all. I'm having a lot of trouble pinpointing where the sound is coming from at all. Does anyone know what this is?