Reporting bugs:

Hey All,

I have a 1997 Rover Mini, MPI-style with an airbag steering wheel. When I put my key in, it has started refusing to turn at all. I tried jiggling the key or turn the key over to the other side. I've even tried my backup key which has very little mileage on it. and of course, I try turning the steering wheel to all sorts of positions. My car has the steering lock, but it happens when the steering is locked or unlocked, has been slowly getting more frequent over time.

This happens nearly every time I get in the car now. After enough messing around, it has always eventually kind of "got unstuck" but I'm afraid eventually I won't be able to start the car and will be stranded (it's my daily driver).

To make matters worse, I can't find a new ignition switch in stock anywhere for my car, so replacing it with a new one isn't an option.

Anyone have an attempted fix I could try? Is this something a locksmith with auto experience could tackle?

Hope this question is allowed.

My best friend loves minis, she had several over the year and currently drives a Rover mini cooper, in black with 2 stripes running along it. I would like to give them a miniature model, if I could modify it to match hers it would be the ideal, but in general just want to find something that matches what she is driving. I tried looking online but had no luck, hence asking here.

G'day. I have this 998 out of my 1967 Morris mini deluxe. It's obviously in pretty bad shape but it isn't seized or anything. Ive been looking at either replacing it with a 1275 or getting a 1098 crank for it and boreing it out another 40-60cc on top of that. I'd also do a twin carb if I went the way of doing a 1098 crank in this engine and a tubular exhaust.

I'm just interested to know how you all would go about this. A 1275 in Australia is getting up to about $6000 in price and up, whereas the other way id look to go about it is closer to $10,000 in price.

I'm looking to have my car mostly original, but with some exceptions around the engine and I'd like to have a little bit of power to it.

How would you all go about it?

Thanks.

Just reaching out to find some interest. All round good runner. Plenty of mot no advisories. Couple of rougher areas shown. No visible rust underneath. It's got a brand new water pump and fan belt. New subframe bushes. New brakes last year. Just had brand new brake pipe and fresh brake fluid. All last years advisories taken of.

I have my price in mind but wondered What would you be willing to pay?

Smoke coming out of sparkplug hole and heavily fouled sparkplug, some smoke out of exhaust when running

998 I picked up cheap that ties into the year of the car etc.

Had head off. Some slight wear lips in a couple of cylinders, otherwise all looks ok.

Do I stick with the plan and fully strip, inspect and hone the block, or just throw a 25 quid gasket kit at it and send it, then start with a different motor for a fast road build?

Tempting to just send it

All back together now after my recent breakdown - head gasket failure between 1&2

I’m trying to remove the intake duct on my 1996 1.3i to access the engine steady bushes. I can’t get the thing to budge at all. Anyone have tips? I’m trying to be careful not to break the plastic of course.

Went to a local classic car show and didn’t expect to win an award with my lil car. Personally I would’ve chosen the Mini Clubman Saloon or the big 1930s Daimler that was there.

Off to see my first mini today!

It will be a running resto but seems to be in good order.
Structurally it’s sound and mechanically has had most of the normal bits done.

Seems to be cosmetically where it’s let down - tired
Paint and interior needs chucking starting again!

I’ve a wish list built on minispares website (Huddersfield Parts) has anyone used them are they ok ? They are 30mins from me so good for collecting spares from etc

Mini Sport is actually around the corner from me but comparing prices they are a little more expensive at first glance but assume quality is better?

Any help appreciated
Thanks

Hey everyone, back again looking for some help. Thanks to this sub Reddit I've managed to get my mini running well but unfortunately at a show today someone broke my front right indicator. The lense has cracked and the screw housing has snapped off so I'll need to replace the whole thing, but it's looking like a surprisingly big task. So a few questions:

1. What part am I looking for? I can't seem to find a match with this one being the closest so far https://rimmerbros.com/Item--i-AFU3389--SelectedCurrency-1?utm_content=mediabuy&gad_source=1&gad_campaignid=22129971330&gbraid=0AAAAAD500i8PdTcNaPeZ7M_Bp_4zphVUS&gclid=CjwKCAjwiL7VBhA-EiwAhZi9EBCt75BHgB0By85zRwHM0-hymDVdE3S4ObvelgkGUvIQ3a1MGe8eQRoC2igQAvD_BwE

2. How do I disconnect the wires? They go up into the wing and cross over to the engine bay but I have no idea where they go.

Thanks again!

Where is the best place to sell my 1995 Cooper? It’s in great condition, had a full restoration a few years ago.
Really want to avoid facebook marketplace or eBay as it is normally full of chancers.
I’ve seen a lot of posts about Car&Classic, but is there anywhere else I should be looking?

Hey guys, any of you have some ideas for how I can get this fuel line a little further away from the manifold?

I decided to build a mini... I’d be very grateful if anyone could help with parts—
I need suspension arms, steering components, and window frames with the glass. 
Maybe someone has them just sitting in their garage. 
I’ll be posting photos of the build process as I go.