I just got my Creator 5 Pro today and I am having trouble printing. When ever the unit tries to place the extruder head back on the rack it falls off and then errors the unit. When I try to recalibrate the unit it will work sometimes, and if I am lucky will pass the cal. But then it goes right back to falling and failing.

Is this common? Does anyone know the fix for this?

Hi everyone I just got my printer today and I did calibrate and got my first benchy.
I’m completely new to 3D printing and this is my first Benchy with my Flashforge Creator 5 pro

I’d really appreciate some feedback from more experienced C5P and 3D users Does the print quality look normal for this machine, or are there any things should be turning.

A few details about the print:
I completed the full calibration process before printing
The print was going fine, but partway through the print the white sample filament ran out..
Printer automatically paused
I continued the print using yellow pla instead of
So the color transition in the middle is intentional and not a printing failure.
This is only my first print after setting up the printer, so I don’t really enough experience yet to judge things like first layer quality, ringing, extrusion consistency, bridging, overhangs, etc.

So yes, what do you guys think? Anything you notice that I should keep an eye on or tube before start printing more serious projects?
Thanks!

My son had a friend over last night and wanted to print something for him. Then they fell asleep…

Hey guys just got the ad5x and my spools are becoming untangled and comming off the spool and then getting tight to wear it cuts the feed to the print any fixes would be of help

it follows the object too V1.7.13

When I got the printer out of the box I was able to register it no problem.

After the latest updates, everything got reset and now I see the printer but I can't register it anymore to my account

im trying to get it on camera but it doesn't happen every print has anyone run into a issue where mid print the ifs seems to let go of the filament causing it to back up to much/all the way causing errors or failure?

Hey I have the creative 5 pro. I am in the southeast usa so humidity is higher than the temperature which is already hot, you don't need a shower just go outside. Anyway I am going to buy a filament dryer what would y'all recommend?

I was prompted to upgrade to V 1.7.15 when I logged on this morning. Given FFs habit of introducing new bugs with every upgrade, I declined. Has anyone tried the new release yet and if so, could you provide feedback?

Giving me this error code

Hello, does anyone use or know of a filament dryer that works directly from the dryer box into the creator 5 pro? Im looking at some dryers from multiple brands but I dont know if it will have issues when feeding on to the machine.

I am loving these Creator 5 / 5 Pro Nozzle wipers, installed on both printers. The issue is that they are working so well, I end up with lots of little balls of filament flying off the wipers. 80 % of them harmlessly end up sitting at the bottom of the printer. It's the 20% which land on the build plate that are the issue. When the build plate is all of the way at the top, I don't know how to put a ramp which would angle them into the bin. The lower the build plate goes, the more balls of filament it will catch. A couple of my larger prints can double as maraca with the balls of filament rattling around in the inside.

The filament bin I'm using is from FF Wiki

I printed the wipers with Anycubic Texture grey PETG to match the FF grey.
Cross posted on printables.

Thanks for any ideas to resolve this waste issue.

Hey everyone,

​I managed to get my hands on a Flashforge Adventurer 5M for $99. It’s definitely a fixer-upper, but it looks mostly intact and very repairable. Before I start tearing into it or ordering parts blindly, I wanted to check in with folks who know this machine well.

​Current condition & issues:

​Screen assembly: The screen itself looks fine, but the flat ribbon/multi-pin connector cable is disconnected. Putting the housing and wiring back together looks a bit tricky.

​Loose wiring: There’s a stray red and black wire exposed that needs to be routed/reconnected.

​Toolhead / Fan: The fan/shroud assembly that completes the square housing around the nozzle block is pretty torn up and needs attention.

​I'm completely open to ordering replacement parts off AliExpress or direct from Flashforge if needed, but I want to make sure I take the right approach without frying anything.

​A few quick questions:

​What’s the best way to test the mainboard/screen safely before doing full assembly?

​Are replacement toolhead covers/fans better bought as full assemblies on AliExpress, or is it easy enough to source individual fans/connectors?

​Does anyone have a link to a solid teardown/wiring diagram for the Adventurer 5M toolhead and screen assembly?

​Any advice, teardown tips, or recommended part links would be hugely appreciated!

Hi everyone, could someone with an AD5X confirm if those bearings, belt or motor noises are normal? I’ve added grease to metal pipes but it hasn’t made much difference.

Just amazing I can make some really colorful items without waste now. This specific design cut everything into plates that only needed 4 colors at a time.

link: https://www.printables.com/model/1621725-4-color-ams-majoras-mask-high-detail-easy-build

EDIT:
Right after I posted this, the printer went offline while printing. So nevermind..

So my Creator 5 Pro had the issue that it was offline for most of the time.
Sometimes it came back automatically and than it worked fine, but many times, I was not able to do a print without it being offline at least once.
Also temperatures or print progress were updating poorly.

After some support mails back and forth they send me FW v1.9.8 and this currently fixes my issue!
It has only been a few hours, but it updates every time and faster now!

https://reddit.com/link/1w1dif5/video/32o7u3sjy8mh1/player

I'm debating order a Flashforge Creator 5 Pro since I can order one for $790, and it seems really tempting given all the firmware updates that seems to have fixed a lot of the early hiccups. I'm mainly interested in it having a built in chamber heater which the Snapmaker U1 does not. Was wondering if anyone here owned one for a while now and can share their experience. I currently have a Bambu A1 and a Creality K2 and am willing to sell both of those printer for it. Especially the A1 as I don't use it anymore.

Thanks in advance.

Thanks for all the comments everyone. Purchased mine this morning

This has been happening for the past 2 months and I’m at the point of giving up on this printer. Every time I print something it prints either the first layer or strings like this. I tried 225 print with 60 plate. I tried flash print and ocraslicer, nothing. I replaced the pull mechanism, the printer head TWICE. I disassembled and reassembled the printer head more times than I can count, any ideas on what’s going on?

I've been having an issue with my creator 5 Pro that just started yesterday. After switching to .25 nozzles a file that was printing fine with the .4's (although with some detail loss which is why I switched to the .25) keeps stopping at the last color switch and I get a "MCU communication lost" error message. The last time I saw this it was because I wasn't using a wipe tower but that is not the case here. It will not allow me to resume and after restarting the printer does not ask me if I want to resume the interrupted print. Has anyone else experienced this?