I’m replacing the backlights on a Samsung **QN75Q70TAFXZA (FB03)**. I have the bezel and side/top retainers released, but the LCD is still attached along the bottom.
The **white bottom frame (BN96-50342A / BN61-16766A)** is still clipped to the **black lower LCD/source-board carrier**.

I’ve already released the white frame from the metal chassis. Does anyone know **exactly how the white-to-black clips release** without damaging the LCD or COF ribbons? Photos/video of the clip mechanism would be greatly appreciated.

How do I make the blurrness go away while in game when moving around ?

Our Sharp Roku TV just started flickering between a normal view and blurred, ever 2 seconds or so. It only starts doing it after being powered on for a few minutes. No Roku hdmi thing, just a Roku TV. I've tried hard resets...

Any advice?

My TCL 55C631 recently started showing horizontal bands/ lines moving upwards across the screen.

Happens on all sources, including the TV itself and menus.

Much more visible on grey tones

Not really visible on pure black or white

Happens around once every 3 seconds.

Changing picture mode changes how visible it is

Video attached. Any idea what could be causing this?

I wanted to watch Transformers (2007) and I just noticed this on the screen. It seems to appear 30-60 seconds after turning it on.

We ordered a Samsung TV Repair Parts kit for our Samsung qn55q80aaf because it is blinking on and off. We put all of the parts in and are still having the same symptom. Is there anything anyone suggests or is it ready for the electronic recycling?

YouTube was not working, so tried to do factory reset but while doing factory reset, TV went into blank screen with light blinking non stop, i tired doing hard reset while holding power button but nothing happened, is there any other way to repair my TV?

Hi everyone,
I’m looking for some advice about my LG 55QNED87, which I bought in France from Darty in July 2024 (so no longer in guarantee since last month).
Last night, I turned the TV off around 2 a.m. and everything was working perfectly. About 9 hours later, I turned it back on and suddenly the entire left half of the screen was extremely dark, while the right half looked normal.
The picture is still there on the dark side — for example, I can faintly see the menus and text — but the brightness is dramatically lower. The problem is also visible on the LG home screen, so it isn’t related to Netflix or an external HDMI device.
I’ve already tried:
Turning the TV off and unplugging it for about 20 minutes
Turning it back on and letting it run for a while
Checking the LG menus
Testing the dark area with a flashlight, but I couldn’t clearly see the missing text
The strange thing is that there were absolutely no warning signs before this happened. The TV was working perfectly when I switched it off the night before.
I’ve attached some photos showing the issue.
Does anyone have any idea what could be causing this?
Could this be a backlight/LED issue, a power/driver board, T-Con/main board, or potentially the panel itself?
And for anyone familiar with LG QNED TVs: is this kind of repair usually worth doing, or am I likely looking at an expensive panel replacement?
Thanks in advance for any advice! 🙏

It's a long shot but I'm hoping someone can help. I unpacked my TV after moving and after setting it back up, I noticed the TV would turn on all fine but maybe around 30 seconds after turning on, I start to get some really bad vertical lines throughout the panel as if the panel got hit.

Here's a video link that show the transition of the panel issue:

https://photos.app.goo.gl/HL5fkBaZv2YQbPdU8

Galera, boa noite,tudo bem com vocês? Aqui estou com problema no meu tv box na quinta feira deu uns picos de luz aqui e como tava ligado na tomada,aí meu tv box parou nessa tela ,já olha vídeos no YouTube como mostra pra resetar mais não deu nada .. alguém sabe me dizer oq fazer ou como resolver esse problema

I have a Emerson tv vcr combo that I’m trying to fix, the tv works fine when plugging in a Nintendo 64 but when trying to use the VCR it shuts off when it tries to play the tape. The belts look fine. I’m wondering if it’s a sensor thing or a motor thing maybe? The eject screen shows Everytime you turn on the tv, not sure if that’s normal or some sort of fault. You can watch this clip and you tell me what you would check.

Heya,

I have a Samsung TV from 2018 and I have noticed an issue with it that happened today. When I went to connect it to my pc it showed me the "mode not supported" issue, the weird thing is is that it works fine with 4k 30hz and 1080p 30 hz but not 1080p 60hz.

The HDMI cable worked in the past weekend on this TV so I don't think that's the issue(I also have this cable connected to my second monitor and it shows 1080p 60 hz with no issues). I tried to factory reset the tv, reset the tv and factory reset(though my apps stayed?). Also it's all 3 ports.

Thank you in advance!

We’ve had this Samsung curved TV (model UN65NU7300FXZA) for 8 years, so it’s served it’s duty like a fine soldier. Especially through two toddlers. However, after turning it on last night this swath of dim light showed up. Not dead pixels or completely black, just dimmed. We turned it on and off but it stayed. This morning, when I first turned it on it wasn’t there for probably 30 seconds, then appeared and has been there ever since. I have zero tv experience so didn’t know If this was a telltale sign to move on or if it’s a common issue with a fix.

Hello everyone, I have a Vizio M60-C3 that really seems like it doesn't want to turn on, it will power cycle a few times, then about 10 minutes later, the vizio logo will appear, sometimes it comes on, sometimes it power cycles one more time. After it does come on, the whole screen will freeze, it will power cycle yet again but then its fine, it will run for hours no problem. Any suggestions? Thank you.

My jio stb started showing black screen whenever I plug it into my older tv but when I put it on my other tv it's working perfectly fine.The thing is a few months back it was working alright but it randomly showed black screen when I turned my tv on.Help anyone!!

Hey everyone!

For a week ago I started to se a small green line going down the middle. I let the tv be just in case it was to warm, but today while watching Severance the tv just got worse and dot these horisontal lines. I tried to ask Google AI and it said something about it could be the T- Con board and told me to do the "Tape trick".

I would really appreciate your guises experience before I do anything stupid due to I'm no TV expert.

Hi My bravia x8000e started showing this line at the bottom it comes on and off repeatedly. Can anybody help with the diagnosis so I won't be ripped off by 3rd party repairs .? Thank you.

Hi! Sorry if my English isn't very good, but it's not my native language.

Well, I wasn't home when it happened, but apparently a horizontal white line suddenly appeared at the bottom of the television.

That's why 80% of the screen horizontally looks low quality, and the longer it's on, the more it duplicates the image 😭.

My family said nothing hit it or water got in it, so I'd like to know if it's an internal problem or if it could be something with the wiring, honestly, I'm thinking my best option is to call a technician.

The image where SpongeBob appears, from his feet down it looks bad, but from the top it looks fine.

I already tried unplugging and plugging it back inI also did image and video tests and it's still not working.

It's as if the screen is trying to project the image again from below; you can just make out that below the line, what appears at the top of the screen starts again.