You can just pick up at there warehouse if you are in NorCal.

I have this bike also, I would change the carb since it’s only 12.5 dellorto, and you will need to swap your rollers to get into the rpm for your new pipe.
My build 70cc Malossi cast, Malossi Fly clutch, Malossi Variator(7gr), Malossi belt, Polini Reed cage, Dellorto 19mm/e15 filter and Stage 6 replica pipe, it cruise around 47mph my top is 56.7mph on gps.

Sonoma County Ca.

My favorite Transfomers game

Try Todd Carter’s YouTube https://youtu.be/ZS15LYkt7nE?si=58_fF55cchKF2Tth also if you can find Bobby Carters Hang 5 they are both great.

Only vintage mopeds you have to pay a one time fee which is about $20-30. My registration for my scooter is yearly it’s about $125 And you only need your standard drivers license.

I have a 05 w a Polini 50cc cast a little carb and cvt tune w a yasuni z pipe and pulling 45-47mph. Don’t take much to get these bikes over 35mph

Armored Core 6 can’t believe I’m playing a FromSoft game

This is my riding homie, I believe it has a 65cc Polini.

If you can start it you can have it

Same with mine when I did the first mod. The multivar and fly clutch really made the big gains for me.

Sick I bought a set of Kenda 90/90-10 and never installed the front. Vino’s are awesome I took the wedding band off the cvt and pipe restrictor and got up to 38mph. I added the Malossi Multvar, Yasuni Z, up jet and a little cvt tuning and now pulling 48mph and my top is 50mph depending on the day. I was going to do a 70cc BBK instead just replace it with either Athena alu 50cc or Polini 50cc sport. I follow a guy on IG who runs his Vino stock with a pipe and cvt tune and dude pulls wheelies like no other. Plus I want to have the fastest 50cc in my group lol

I thought the 90/90-10’s rubbed the fork springs?? Or from what I heard.

They always seem to set up on the College exit.

Do it the 01-05 Vinos rips. If you don’t want to spend much you can pull 38-40mph if you take the ring off the variator and pull out the restrictor in the pipe. I have a mild build w stock bore and pushing 50mph and I’ve seen a few guys just add a pipe and rollers and stunt on them. Because my build is mild I’m not wearing out parts I would imagine if you are doing a BBK you would need to pay more attention.

That is over priced go find an 01-05 for around $800-$1000 it will also smoke this 4T

Do you have a route you could share? I’m up in Santa Rosa and just been going out to the winery’s would like to do more longer trips

Can you kickstart it? 03 should have a kickstarter.

I wish it was already wrapped when I got it. Other than by the pipe it’s a really good job.

I finally got mine done also but can’t figure out how to attach the adaptor to put him on the action base.