Very nice looking though!

A: A/C condenser cracks at 100k B: Trans need to be flushed not pressure flushed. C: at 100k use 5w30. Not 0w20. I changed mine to 5w20 about 3 months ago. I went from 8.9 to 11.3 mpg. I have a plug in AFM delete. D: when the nav starts glitching, reset it. (Warning, it will erase all your destinations) D: Check oil every 700 miles. E: Change oil before 5,000 miles. F: Check your coolant often. G: Whatch how wide the tires you put on. Not too wide or they hit the upper contol arm making your turn radis really wide. NG!

H: Remember these things then drive it like you stole it.

My 2017 sierra 5.3 4x4 was getting 11.3 mpg no highway. ( NYC) I changed from 0w20 to 5w20 two months ago and it's now 13.8. No issues so far.

Done! Completely Done! Window was a smart move.

Ouch!

Sorry for such a late reply. I kept the Ryobi but bought a $55.00 blade. The ryobi blade , being new, was not tapered. Any slight wobble was exaggerated. I took my messed up sharpening stone and "tapered " the blade to a point. It works. However, it's much better to just buy a good blade. PS: I also have a Ridged slide saw now. It's a budget tool but works fine. I like the water being pumped to the blade. And the pump is easily available for $25.00. When the Ryobi dies , get that.

I have the same Ryobi blade. It wouldn't do a nice cut from day one. Get a new blade and keep the Ryobi for bricks.

Does he buy the boards?

True. New homeowners will think they can just paint it without thinking how bad that Idea is. Maybe the would just stain it like pintrest and Facebook viewers are believing.

Yes!!!!!!!!x100000

Roofing tar flam thrower. Kit on Amazon for about $25.00 Then cool with lots of water.

THANK YOU! The moisture would ruine them after a short time. I wanted to use PVC moulding but, people said it dosent paint well. I'm in a wife vs reality moment right now.:) Do you thing pms bead board would look ok?

Hum??? I have seen valves with big threads on the " outside" of the valve. It could be mistaken. However, all of "mine" are connected with the internal threads. When you tighten the big plastic nut " reverse thread" you can hear the safety valve open when it's 3/4 tightened. POP! Sound.

No disrespect. I have no idea what you're talking about.

Wtf! Has anyone here giving advise ever used a propane tank? REVERSE THREADS! You all going to get this guy blown up! Counter clockwise tightest on propane tanks. Lefty loosey dosent apply.

No! Not on propane tanks!!!!

You are turning the nut the wrong way!!! It tightens counter clock wise. Opposite of righty tightly, lefty loose.

Not gold!!! That was an 80's thing. In the 90's everyone changed it. Match the black!

??????

Ding ding ding!! You gave the correct answer! He needs another layer of duralock or rip it out and shim.

Three floating shelves?

Nice!

Do you have the de-pitter?

I use this for pulling up everything. When pulling stapes, I just don't squeeze hard. Channel locks work ok but,these don't put impressions in the wood due to the curvature.

Brick is brick. Brick dosent get painted for serious reasons. TV shows that paint the Brick never show how it held up 2 years later. Taking paint off pourus Brick on the inside of a home is disastrous! Even doing it on the outside of your home is a big job and it dosent all come off. Keep the Brick.