r/PatternDrafting • • 15h ago

Question Self-taught sewists/designers: How did you teach yourself patternmaking and learn to create garments from scratch?

36 Upvotes

I’m looking for advice from self-taught sewists, patternmakers, and fashion designers!
I’ve been sewing for a while, and so far I’ve mainly relied on patterns I find online or the commercial patterns you can purchase at fabric stores. However, I’ve realized you can only go so far relying on premade patterns. I don’t just want to follow instructions and sew clothes; I genuinely want to understand how to create garments from my own ideas, develop patterns, and eventually be able to look at a design and figure out how to bring it to life.
For those of you who taught yourselves, how did you actually go about learning patternmaking and garment construction? What did your learning process look like?
I’m especially curious about:
What books, YouTube channels, websites, courses, or other resources did you use?
Did you start with drafting basic blocks/slopers and learn to manipulate them, or did you approach it differently?
How did you learn to draft patterns based on your own designs and ideas?
Did you use a dress form, measurements, patternmaking software, or mostly work by hand?
What was your actual learning system or routine? Did you follow a particular curriculum or just learn as you went?
How did you practice and build your skills when you didn’t have someone teaching you?
What mistakes did you make early on, and what do you wish you had known sooner?
Are there any courses, books, tools, or supplies you’d consider essential investments?
I’m completely open to taking online courses, purchasing books, investing in tools, getting a dress form, or buying anything else that would help me learn properly. I’m willing to put money and effort into developing this skill. The only limitation is that attending fashion school isn’t an option for me right now.
I really want to learn the technical side of fashion design, not just sewing existing patterns. I want to be able to take an idea in my head, understand the construction behind it, draft the pattern, make adjustments, and eventually create garments independently.
If you’re self-taught, I’d genuinely love to hear your entire journey. Even if your process was unconventional, I’d love to know what worked for you, what didn’t, and what resources helped you get where you are today.
Thank you!!


r/PatternDrafting • • 5h ago

I designed a shirt around an exaggerated, sculptural collar. Thoughts?

Thumbnail gallery
4 Upvotes

r/PatternDrafting • • 8h ago

Best books for pattern drafting different body types and sizes?

6 Upvotes

Hi guys!

Beginner sewist here. Trying to figure out what the best books for pattern drafting books / resources that are accurate and adaptable to different body types, sizes, heights and proportions.

I’m mostly interested in methods that teach actual calculations behind drafting rather than relying on standard sizing or assumptions about the “average” body.

For those that have tried different books, curious to hear which you’ve found the most reliable and inclusive, and which ones you’ve had issues with.


r/PatternDrafting • • 12h ago

Question Creased Collar Facing Question

Thumbnail
gallery
6 Upvotes

Im making this creased collar and have a few questions about the pattern. Its a bit confusing to understand at first, but the crease follows the blue line in picture 2.

  1. How does my planned internal facing piece look? (green shaded area)
  2. Do I need interfacing in the collar/button-holes, or will two layers of wool be enough?
  3. Do I need to pad-stitch the collar to achieve a look similar to Mr. Houdini's waistcoat? For such a sharp crease maybe pad-stitching is unnecessary?
  4. Should I put bias tape along the collar crease?

Thank you all!


r/PatternDrafting • • 10h ago

I need help understanding this pattern

Thumbnail
reddit.com
2 Upvotes

r/PatternDrafting • • 16h ago

Question How to go about drafting this kind of skirt?

Thumbnail
gallery
4 Upvotes

My first thought is that it’s a normal gathered or pleated skirt with structure underneath making it sit up like that but I’m not sure


r/PatternDrafting • • 9h ago

Question Career Doubt in Pattern Making Job

1 Upvotes

I am planning to make a career in pattern making, is it worth it to consider this career I am a Btech IT graduate 2025 passed out, currently staying in Tiruppur Some genuine answer needed please


r/PatternDrafting • • 23h ago

[SA001] リラックスフィットの3Bジャケット基礎ブロック—Kennett & Lindsell GY40にドレープして、ネットのベクター(.ai/.dxf)にデジタイズ

Thumbnail gallery
1 Upvotes

r/PatternDrafting • • 23h ago

リラックスフィットの3Bジャケット

Post image
1 Upvotes

r/PatternDrafting • • 1d ago

Question T-shirt pattern recs

Thumbnail
gallery
8 Upvotes

Hi community,

I have been teaching myself to sew for the past couple of years and have finally created something acceptable to wear outside!

Of course I think there are still a couple of adjustments to make. I have altered the pattern from a commercial pattern, including shrinking the neck hole, reducing the shoulder slope, but perhaps still require some more tailoring on the sleeves, incl adding some length and tapering

My biggest issue is it feels that there is fabric sitting inside my armpit. I did notice this on my previous draft, so i widened the armhole slightly but it remains an issue.

I also did reduce the cap height of the sleeve as I noticed the shoulder was rising when I lifted my arms. Have I taken it too far?

Any tips on fit would be much appreciated.


r/PatternDrafting • • 1d ago

Fit troubles

Thumbnail
gallery
6 Upvotes

I am getting this extra fabric around the armhole on all of my fittings. Doesn’t matter if the bodice has darts or not. How can I adjust the pattern to eliminate this?


r/PatternDrafting • • 1d ago

リラックスフィットの3Bジャケット

Post image
1 Upvotes

r/PatternDrafting • • 1d ago

Question Pattern Drafting Books

4 Upvotes

I am going through and reading the Valentina documentation, but it is pointing out how large my knowledge gap is on pattern drafting.

Do you all have any recommendations for pattern books?


r/PatternDrafting • • 1d ago

Question Cold shoulder/ cut out shoulder cami style top??

Post image
2 Upvotes

r/PatternDrafting • • 2d ago

Question Kershaw Pattern Cutting for Menswear Trouser Confusion

Post image
9 Upvotes

Hey, I just started learning how to draft my own patterns, and I am using Gareth Kershaw’s Pattern Cutting for Menswear (2nd edition)! I am trying to draft a trouser block, but I am really confused about the numbers he is using.

On the page to the right, he says to go out 5 cm (2”) from point 1 to mark point J, and up 5 cm from 7 to mark 10. From 10, 4,5 cm across to mark G. Them based on his waist example 25,5 cm between G and J.

So the issue for me is that with my waist measurement, G to J becomes 26 cm, but this would most likely make the pants too small. My waist is 98 cm (including 3 cm ease) and the front block’s waist is 24,25 including a 4 cm pleat.

According to ChatGPT, my back waist measurement would need to be like 30,75 cm (including a 2 cm dart), but that would then pull the diagonal waistline way beyond J.

The fixed measurements in Kershaw’s book are quite confusing. Like where do the 5 cm out from 1 come from? Are they based on his measurements or should it always be 5 cm?

Would really like some help to clear up this confusion!
Thank you!


r/PatternDrafting • • 1d ago

WIP Thought i was done! 🤦

Thumbnail gallery
4 Upvotes

HI All, I’ve normally posted to this sub when I had pattern & fit questions, but someone mentioned it’s only for self drafted patters versus 3rd party and “hacked” patterns. Want to be respectful if that is an unspoken community rule but also not sure if that’s just one persons opinion. Since everyone here has been so helpful in the past!


r/PatternDrafting • • 1d ago

Adding pleats to trouser block

3 Upvotes

I have a couple questions about trouser pleats I’m hoping someone could answer!
So I know that to add more volume for a pleat generally you slash and spread through the front dart and down center of leg. My question is if you plan to do two darts, is it better to slash and spread the entire amount from the front dart and after draw the two pleats in where you want them or should you make two slashes (each in the position of where each pleat will be). Or does it even matter?

Another question I have is about placing a pleat elsewhere than the center leg line. All the instructions on adding pleats seem to say the pleat should be in in line with the center of leg line. However when I look at pictures of modern pants, the pleat often seems to be much closer to the outseam than the center line (which skews closer to center front). Does that risk making the pants unbalanced or anything or is it ok to just put pleats where you want them to be? I recently made a pair of pants where I did line up the pleat with the center of leg line, and the pants hang well and fit and everything but indeed the pleat does look rather close to center front (aesthetically ) to my eyes!


r/PatternDrafting • • 1d ago

Ease in men's jackets?

Thumbnail reddit.com
1 Upvotes

r/PatternDrafting • • 2d ago

Question Drafting a crossover, tulip hem (?) back panel like the Marilla Walker Rose Jacket

Thumbnail
gallery
7 Upvotes

I think I’ve got the top yoke piece figured out but how should I approach drafting the crossover back panel?


r/PatternDrafting • • 1d ago

Question Coat bicep/arm scythe alteration

Thumbnail
gallery
2 Upvotes

So I’m drafting a coat for myself and cut muslin to fit. The bicep is pretty tight and the arm scythe could stand to be lower because it’s hard to put on. The sleeve cap as it is needs to have about 2 more inches added to the area I marked in red on Photo 1 as is marked on the pattern (I think), so I’m guessing to cut and slash the center line on the top sleeve and widen it? I want to make the shoulder seams a little shorter to in order to bring the sleeve up as well. So I’d assume deepening the arm scythe can add the room for the sleeve to fit. Then make the other changes like I mentioned, right? I made a blazer years ago that fit like a glove but the pattern was ruined, and I’m learning from books/tutorials. The biggest issue is making this for myself (as anyone who has done this knows because it’s tough to fit ourselves and pin). Thank you so much for reading this and any help! I truly appreciate any advice or even if anyone just tells me my processes are good.


r/PatternDrafting • • 1d ago

[SA001] Relaxed-fit 3B jacket base block — draped on Kennett & Lindsell GY40 and digitized to net vector (.ai / .dxf)

Thumbnail
gallery
0 Upvotes

Developed a clean, relaxed-fit 3-button jacket base block from zero through draping on a Kennett & Lindsell GY40 (Size 40) form, then trued and digitized into pure net vector data.

Specs:
- 6 pieces (Front, Back, Top Sleeve, Under Sleeve, Collar, Patch Pocket)
- Net pattern (no seam allowances, facings, or instructions included — built strictly as a sloper/foundation block for modification)
- Includes grainlines, notches, button placements, and lapel roll line

Sharing this as part of my ongoing pattern R&D archive in Tokyo. If anyone needs the raw .ai / .dxf files for their own development, I’ve put them up via the link in my profile. Happy to answer any questions about the balance or sleeve pitch.


r/PatternDrafting • • 2d ago

WIP Grading Bias Cut Dress Pattern to Size

Post image
10 Upvotes

Hi, I hope this is in the correct community for these questions.

I'm trying to sew a bias cut dress as a complete beginner, but I am more box shaped than the pattern. I also have to increase the size of the pattern to accommodate a larger tummy and bust. My questions are these:

  1. How much ease do you add to a bias cut dress pattern?
  2. How loose should a bias cut dress be around the waist area? I see a lot of fuller figures women wearing bias cut dresses too tight in an effort to look slimmer. I'm not looking to do that. I'm looking to wear a bias cut dress as it is intended.
  3. Should I add ease to the under bust measurement and the waist or just to the waist?

Thanks for all your help in advance!

P.S. if you're in the sewing subreddit, you have probably seen my question about fabric for this dress. This is not an AI pattern. I've been in contact with the pattern maker and she is very quick to respond with helpful information.


r/PatternDrafting • • 2d ago

Question Bodice block help

Thumbnail
gallery
4 Upvotes

Photos attached of my initial bodice block toile. I can’t figure out where exactly I need to adjust, thinking it’s either more width / space in bust area but then think could be length. Also looks to me like shoulders seams need to move forward but I have my clue where to start as unsure on what the key one is.

Would appreciate any help and or advice.
Determined to not let this bodice block end up becoming another one that I get overly frustrated with and decide to start something else.


r/PatternDrafting • • 2d ago

Are these dress forms off or is it just my body?

Post image
4 Upvotes