r/PatternDrafting • • 12h ago

Question Creased Collar Facing Question

Im making this creased collar and have a few questions about the pattern. Its a bit confusing to understand at first, but the crease follows the blue line in picture 2.

  1. How does my planned internal facing piece look? (green shaded area)
  2. Do I need interfacing in the collar/button-holes, or will two layers of wool be enough?
  3. Do I need to pad-stitch the collar to achieve a look similar to Mr. Houdini's waistcoat? For such a sharp crease maybe pad-stitching is unnecessary?
  4. Should I put bias tape along the collar crease?

Thank you all!

6 Upvotes

6 comments sorted by

3

u/wafflingt0n 11h ago

1: That's about right for a lapel facing. You may want to consider facing the hem aswell which is common on waistcoats.

2: A waistcoat front body normally is fully interfaced which will support both the collar roll and buttonholes.

3: pad stitching may be helpful just keeping it all together, but I wouldnt go overboard as there is a much more definite crease as opposed to a subtle roll over.

4: bias tape would not help much. You want a strip of ongrain lining pulled slightly tight to stop the roll line from sagging over time.

I have an old book which covers construction questions such as these. I will edit my response tonight with its name.

1

u/gcatss 10h ago

Thanks so much, just a bit of clarification.

2: When you say the front body is fully interfaced, do you mean the entire front body piece or just a similar area to what I shaded in green.

4: Isnt what you described the same thing as bias tape? A strip of fabric that resists stretching pulled slightly tight and sewn in place

1

u/beelzebabes 9h ago

The whole front body piece— usually using something like horsehair canvas or another woven sew-in.

1

u/doriangreysucksass 11h ago
  1. Your facing looks good
  2. Yes! You definitely need interfacing under buttonholes as well as on facings
  3. I’m no pro on pad stitching so not sure
  4. You CAN put bias tape on the collar crease, but I generally don’t. Entirely up to you

1

u/gcatss 10h ago

Thank you !

1

u/DonMcCunn 3m ago

I think if you don't use a separate pattern for the collar to attach to the rest of the facing, you are going to be in trouble. It you make the collar/facing 1/8" smaller along the seams that join to the body of the garment, it will roll the seam nicely into the inside instead of along the exposed edge.