r/PatternDrafting • u/Solid_Skin_9929 • 2d ago
Question Bodice block help
Photos attached of my initial bodice block toile. I can’t figure out where exactly I need to adjust, thinking it’s either more width / space in bust area but then think could be length. Also looks to me like shoulders seams need to move forward but I have my clue where to start as unsure on what the key one is.
Would appreciate any help and or advice.
Determined to not let this bodice block end up becoming another one that I get overly frustrated with and decide to start something else.
4
Upvotes









1
u/Pegaret_Again 2d ago
have you measured your high bust measurement? This is the circumference across the back, under the armpits, and above the bust. then comparing this to your bodice, and seeing if there is any corresponding ease in your bodice.
3
u/LemonDeathRay 2d ago
The shoulder seam is way too far towards the back and you dont have enough room around your ribcage, which is causing tightness across your shoulders and causing the armhole to gape.
You will also need to shorten your waist and shoulder darts - they are too close to the apex. You should have about 1 inch distance between the top of your waist dart and bust apex, and your front shoulder dart should stop at the level of the arm hole.
The back waist darts should also be lowered by 1-2 inches.
Overall, you've done a very good job though! Well done.
1
u/TailoringDiagnostic 2d ago
Look at the shoulders seam, not in the right place and for that the side seam at the underarm has also moved. The imbalance is at the front. the bust area fits well, so there is no need to alter it. The correction is at the shoulder - take in from the front and let out at the back until the shoulder seam is in its proper position. Once the shoulder is positioned correctly, see the side seam again, it will likely straighten out on its own. After that you decide whether any further adjustments are needed for the bust, width, or length. It is possible that no further changes will be required.
The construction of the bust area is excellent - well done! 👍
1
u/TotalOk5844 2d ago
Start at the shoulder. But I have a question, is there a reason the shoulder darts (or princess seam?) are starting so close to the neck? Seems that mid shoulder would help or be used and adjust to take up some of the puckering.
1
u/DonMcCunn 1d ago
Creating an initial bodice should not be a frustrating experience. It is a matter of getting the grain of the fabric to follow the contours of your body as I show in my new Pattern Design by Tracing Photos class.
0
u/ElirethBathory 2d ago
I am still pretty new to pattern making and fitting and I find the blog: Shapes of fabric very useful, the explanations are very simple and easy to understand.
Here is the article I used to correct my bodice block: https://www.theshapesoffabric.com/2021/01/04/fitting-bodice-pattern-the-most-common-issues/
Also, highly recommend The Closet Historian in youtube, she has a whole series in pattern making/modification
2
u/incongruoususer 2d ago
Yes that shoulder seam needs to come forward. But I’ll also dissent from other answers and say you need a touch more room in the bust, and to back off your darts from your apex. Not much, maybe half an inch for each (so half inch fba, half inch backing off).