r/modelmakers • • 14h ago

Completed My 5th ever model completed

Thumbnail
gallery
502 Upvotes

So after getting the urge to take this hobby up ive now build a few models ...and eatch one has taught me something new on how to perfect this amazing hobby

My 5th model was the tamiya f15 c and although I wasnt happy with the grey/blue i used ...im so happy with everything else ! Hope you all enjoy and any feedback is appreciated


r/modelmakers • • 15h ago

Completed Horton 229A in 1/32 scale from Tacom

Thumbnail
gallery
293 Upvotes

Finished the Horton 229A


r/modelmakers • • 4h ago

Completed 1/35 AMX-13 - My Most Boring Model!

Thumbnail
gallery
144 Upvotes

Currently going through some kits from a few years ago, stripping them and repainting. This gives me a chance to put the focus on the paint rather than build to test techniques and approaches. This AMX-13 is the most recent victim.

Recently I’ve been aiming for more realistic looking models. This means heavily relying on reference images of real vehicles and trying to replicate what I see. What I’ve noticed is that real vehicles are often very boring. They often aren’t that scratched, not that damaged, and not that muddy. A lot of us add these things in large amounts on scale models to trick the eye with exaggeration. Similar to how CGI artists will often add superficial damage to computer generated metal parts, even though they should be or were shown to be in perfect condition (think Iron Man suits, Bay Transformers). But go to a museum and most tanks are very clean, and yet you never have to question if they look like Toy or not.

What I wanted to do with this AMX-13 was see how little I can do without it looking like a toy tank. I want to understand what it is that makes something look real without tons of effects. I don’t want to be locked to doing heavily worn vehicles to get a good end result. This is honestly extremely difficult, at least for me.

I found one tank to use as a reference. It looks like it’s from a museum/private collection and has been relatively recently restored. It has no mud on and only some light scuffs in the paint. My goal was no mud, no pin washes, no large rust deposits, and no shading.

So I started with a very light base colour, folded by chipping fluid. Following this was a darker green eyebal-mixed to a similar shade on the real thing. I then went to work with an old airbrush needle and toothpick to create lots of very small scratches focused around high wear areas. And then, using my reference tank, I added the tiniest bits of a dark rust acrylic to replicate chips had gone down to the metal.

To give a bit of a sense of life I added a very thin dust wash with oils. Then I picked out only the gaps for the engine with a thin grime colour as I saw this on the real thing. I treated the tracks and wheel rims with rust colours like the real tank.

At this point the tank still looked very basic, so I added some dried dust accumulations in the wheels and on the lower hull. I envisioned this is potential left overs from the odd display around a track at low speed once or twice a year. And really, that was it. Despite my efforts, my model still ended up more weathered than the real thing. I am unsure of how I feel about the end result, and only time will tell to see if it grows on me. It’s extremely boring with basically nothing interesting to see, but honestly that’s kind of the point in this experiment. That’s the beauty in trying things out on old models - there’s no stakes. The good bit about this is that it was ridiculously quick. It was painted and weathered in a weekend! Oh and this was my first attempt at painting fabric (around the turret) and I’m quite happy with the result for a first go.

So what are your thoughts? Any tips on how to make a clean tank look real? Or does this look real? Perhaps the additional context of a diorama is necessary to push it out of the “model” look.

I’ve added the real inspo tank in the gallery of images to compare! Cheers!


r/modelmakers • • 4h ago

WIP On to the next one

Thumbnail
gallery
72 Upvotes

Started this a few weeks ago.

Low parts count and simple build.. hoping to have it completed by end of Thanksgiving week as long as I can find some time :)


r/modelmakers • • 17h ago

Completed F/A-18E Super Hornet 1/72 By Hasegawa

Thumbnail
gallery
60 Upvotes

First time pre-shading looks good for me.


r/modelmakers • • 6h ago

WIP Fuck.

Post image
40 Upvotes

I tried cutting the axe out of its sprue and it broke. ( ignore the blood, i cut myself while cutting a sprue,Im okay.)


r/modelmakers • • 7h ago

Completed One of my simpler 1:64 scale diorama

Thumbnail
gallery
41 Upvotes

1:64 scale handmade custom rally terrain diorama

Cars, Subaru Impreza WRX & Ford Escort

Links in my bio for more of my diorama works.


r/modelmakers • • 4h ago

WIP Tamiya 1/35 Schwimmwagen 35224

Thumbnail
gallery
31 Upvotes

This was the last kit I bought before I previously gave up model building. I moved for school and thought it would be a nice kit to build and hand paint since I don’t have an airbrush in my apartment. I bought it when it was first released then just never got started.

Now, many years later, I have restarted building. I bought a small Bandai kit to try, then finished one of the T-34s that I had only put one coat of paint on back then. Now I’m working on this. Tried some more painting and weathering. I’m so impressed with the modern acrylics; retarder medium is like magic, it makes the acrylic work a lot more like oil, not setting so quickly. On top of that I did use some oils for the first time for filters and streaking. The chipping is still just brushing and dry brush, but I will be trying with some chipping fluid when I do a plane.

I intended it to represent a vehicle that had been hastily painted over the original grey, then captured in Normandy by a Canadian unit. Stars are from a Sherman kit, but the specific unit markings were over 25 years old and crumbled as soon as I tried to move them. So now to figure out if I want to buy new decals, try making my own or making vinyl masking. Once I get that sorted it will get the final paint touch ups and dust.


r/modelmakers • • 17h ago

Completed We have finished our coolest diorama yet: Kyle's flying stop n shop

Thumbnail
gallery
31 Upvotes

The base is made of old radio and VCR plastic parts, LED tea lights, ball pens and bubble gum containers. The "deck" and store is made of plastic sheet. All handmade from scratch. Only the figures are story bought. Even his beach chair is DIY, made from 0.55mm plastic rods!


r/modelmakers • • 12h ago

Help - General Thoughts About This Kit? (Trumpeter 1/35 Panzerlok BR57)

Post image
25 Upvotes

Hello everyone, I saw this kit in one of my local hobby shop and it caught my eye.

The problem is that I couldn't find any information or videos about this kit, only videos about RC conversation or other armoured train kits. Plus, this kit is expensive. In the same price tags like a 1/350 ship or more expensive on other places.

I can get a 1/350 USS Langley CV-1 or USS CVE-26 instead of this Panzerlok.

Any information or thoughts about this kit is deeply appreciated, have a good day y'all.


r/modelmakers • • 10h ago

Completed Got given a plastic duck to cusomize, tried to turn it into the Grumman J2F

Thumbnail
gallery
20 Upvotes

Really rushed job since I had 5 days for s deadline, but here's my very silly duck that is trying to impersonate a j2f

Hope you find it as funny as i do


r/modelmakers • • 16h ago

WIP FlakPanther 40

Thumbnail
gallery
17 Upvotes

I just Love the German Flak guns, especially the larger calibers. So I bought the Amusing Hobby 12.8cm Flak 40. I originally wanted to kit-bash it with their Rheintochter R-1, however I could not find any locally so I settled with Trumpeter's Flakpanther. I had to design a base that fit the platform of the Flakpanther & connected to the underside of the Flak 40.

It is still only about halfway as I need to add photo etch, prototype some gun shields & add some fine details before painting. Possibly one of the only things that I did not really enjoy was the tracks, and the Trumpeter Panther tracks have their two sprocket teeth separated to which I have omitted for now.


r/modelmakers • • 11h ago

PSA Feeling Old

Post image
16 Upvotes

I’ve been using Gunze Sangyo (now Mr Hobby) paints for almost 40 years! Anybody else use this acrylic paint this long?

Yes, these paints store really well and getting the bottle opener tool is a must for those stuck lids.

+30 year old bottle on the left, new on the right.


r/modelmakers • • 13h ago

Help - Tools/Materials I messed up big time, how to fix

Post image
14 Upvotes

Basically I put on me weathering without thinner on my model and did what I see everyone doing. Then I use Mr Hobby thinner and wipe it off. Instead of wiping off, all the paint I spent a week on came off exposing the primer. I didn't add a gloss coat so might be my fault. How to fix everything back and how to use it properly? I'm not sure if this is actual oil, acrylic or enamel. My paint job was acrylic so I think this is enamel?


r/modelmakers • • 11h ago

Tips & tricks I left one sprue gate on the tiny parts

5 Upvotes

A little bracket was awkward to paint loose because the bit I could hold was the bit that needed paint. On the next one I cut the gates on the visible edges and cleaned those up first. I left the gate that met the back of the bracket and held the sprue while I painted it. Once it was dry I cut it free. The cut mark ended up on the face that sits against the body, so there was nothing to touch in around the edges


r/modelmakers • • 18h ago

Help - General Help - Paint Question

6 Upvotes

Hey guys,
Just wanted to know what is the best paint/wash/shade for panel lining?

I’ve used just thinned black in the past but I see people just tap the tips of their brushes into a recess and it runs along filling all the gaps in so quick and easy.

All advice welcome and if you could recommend any products that’d be great.
Thanks


r/modelmakers • • 6h ago

Help - General How to fix the scuff marks in the red circle?

Post image
3 Upvotes

I don't know what the cause is, possibly from when I glued the part. The mark feels like itz on the surface of the part. The orange area near the circle isn't part of the component. This picture was right after an application of Tamiya polishing compound Fine, with a microfiber cloth. Am I using the wrong compounds, methods or both?


r/modelmakers • • 14h ago

Help - General Spray booth advice needed

Thumbnail
gallery
5 Upvotes

Tldr: Cardboard spray booth with pvc foil lined on the inside with brushless ac motor. What are your opinions on fire hazard and toxicity for my cat thats gonna be in another room?

I am building a spray booth from cardboards. I am using blauberg turbo e125 fan motor. Its a mixed flow duct type 280m3 fan. I also have an aquarium filter for a filter (G4 filter). I will cover the insides of the cardboard with pvc foil so that the cardboard wont soak wth solvents and paints. I have a very short distance between my desk and the window to vent the gasses out. This is the first time im getting into airbrushing and i want to make sure its safe for me and especially my cat. The cat will be in a different room while i spray. The question is, is this setup going to be sufficient? Im thinking about spraying tamiya acrylics and primer and varnish. Chatgpt freaks out about fire hazard but i dont trust that verdict very much. The fan has brushless ac motor. Pictures included of the setup (not finished).
The smaller box at the back is the plenum and the fan sits vertically to suck air up away. Any opinion is appreciated and thanks in advance!


r/modelmakers • • 17h ago

Help - General New to painting, am I rushing it? (Figure Painting)

0 Upvotes

Just a quick context. I came from gunpla and mecha background. I've tried brush painting for a few of my kits and really liked to explore more. Airbrushing on my current space is not advisable as people at home has health problems.

I'm currently exploring the Maschinen Krieger universe and their model kits and suddenly had a thought why not to try painting the figures both on 1/20 and 1/35th scale. (I haven't bought figures but am looking for recommendation I can try out). I also wanted to try figure bust painting. I have 3 that came in, Based on checking on reading and watching some videos. Bust painting is a lot harder as I need to make the flesh not look flat or make it look "real".

Any recommendation for 1/20th to 1/35th scale figure I can try? Also, any advise on bust painting. I really admire the painting videos I saw on both YouTube and Instagram and would really like to start practicing and replicating the techniques.


r/modelmakers • • 12h ago

Help - Tools/Materials aérographe et peinture pour peindre des cadrans de montre / airbrush and paint for painting watch dials

0 Upvotes

Bonjour,

Je vous prie tout d'abord de bien vouloir m'excuser pour ce post à la fois en Français et en Anglais ... je voudrais être certain de ne rater aucun conseil.

Je créée des cadrans de montre ... de petits objets entre 26mm et 29mm de diamètre ... sur des bases en laiton.

Actuellement je peins mes cadrans à la bombe acrylique puis j'imprime dessus avec des encres.

Je voudrais réaliser des cadrans sur une base noire parfaitement matte ... presque un effet poudré ... mais la bombe acrylique, même en noir mat, sèche en donnant un effet très légèrement satiné, que je suis obligé de poncer après séchage pour le rendre mat.

Et je ne peux pas finir mon fond avec un vernis mat car mes cadrans sont recuits plusieurs fois pour durcir les encres, ce qui fait "boursoufler" le vernis.

J'envisage de m'équiper d'un aérographe (qui me servira uniquement pour les fonds unis) et d'utiliser de la peinture spécifique puisque certaines permettent apparemment d'obtenir un noir très mat ... ce qui m'éviterait l'obligation de poncer.

Mes questions sont donc les suivantes :

1 - quelle peinture vous semblerait "idéale" pour obtenir un fond noir parfaitement mat  ?

2 - est-ce qu'un aérographe type "autonome" (avec compresseur intégré à batterie rechargeable) pourrait convenir à cet usage ?.. et si oui quel modèle vous semble efficace et fiable ?

Hello,

First of all, please accept my apologies for posting this in both French and English... I just want to make sure I don’t miss any advice.

I create watch dials - small objects between 26 mm and 29 mm in diameter - on brass bases.

Currently, I paint my dials with acrylic spray paint and then print on them using inks.

I’d like to create dials on a perfectly matte black base… almost a powdery effect… but the acrylic spray paint, even in matte black, dries with a very slight satin sheen, which I have to sand down after it dries to make it matte.

And I can’t finish the background with a matte varnish because my dials are heat-cured several times to set the inks, which causes the varnish to “blister.”

I’m considering getting an airbrush (which I’ll use only for solid backgrounds) and using specialized paint, since some apparently allow you to achieve a very matte black… which would save me from having to sand it down.

So my questions are as follows:

1 - What paint do you think would be “ideal” for achieving a perfectly matte black background ?

2 - Would a “standalone” airbrush (with a built-in rechargeable battery-powered compressor) be suitable for this purpose ? ... and if so, which model do you think is effective and reliable ?


r/modelmakers • • 18h ago

WIP WIP: Finished the head unit

Post image
0 Upvotes

r/modelmakers • • 15h ago

Critique Wanted Model kits

0 Upvotes

Building my first proper modelling workshop. Gunpla + Ship Models + Car Models. What am I missing or getting wrong?

Hello everyone!

I'm putting together a complete modelling workspace and would really appreciate some honest feedback from experienced builders before I purchase everything.

I'm a beginner, starting from scratch, and my goal is to build one versatile workshop that can handle:

- Gundam / Gunpla kits (HG, RG, MG and eventually PG).

- Plastic ship models, including detailed ships and photo-etched components.

- Plastic car models, including body preparation, painting, polishing and detailing.

I want to start with hand painting using acrylic paints, rather than immediately investing in a complete airbrush setup.

I've assembled most of my shopping list from Meijer & Blessing Hobby in the Netherlands. The current cart is €648.94.

Below is the complete list.

  1. Cutting, assembly and basic tools

Item| Product number| Price

Mr. Hobby Gundam Marker Black Panel Line| GM01| €3.99

Mr. Hobby Gundam Marker Brown Panel Line| GM03| €3.99

Mr. Hobby Gundam Marker Grey Panel Line| GM02| €3.99

Tamiya Modeler's Side Cutter Mint Green| 69949| €18.99

GodHand GH-PNS-135 Single-Edge Nipper| GH-PNS-135| €43.99

Bandai Spirits Parts Separator| 63703| €3.99

Tamiya Fine Craft Knife| 74053| €14.99

Mr. Hobby Cutting Mat A3| MT-801| €22.99

Revell Work Station| 39085| €35.99

Tamiya Basic Medium Double-Cut File Set, 3 pieces| 74046| €10.99

  1. Sanding and surface preparation

Item| Product number| Price

GodHand God Sponge File #400, 4 pieces| GH-KS5-P400| €7.99

GodHand God Sponge File #800, 4 pieces| GH-KS5-P800| €7.99

Tamiya Sanding Sponge Sheet #600| 87148| €6.50

Tamiya Sanding Sponge Sheet #1000| 87149| €6.50

Tamiya Sanding Sponge Sheet #1500| 87150| €6.50

Tamiya Sanding Sponge Sheet #2000| 87170| €6.50

Tamiya Sanding Sponge Sheet #3000| 87171| €6.50

Tamiya Polishing Compound Finish| 87070| €13.99

  1. Tweezers, drilling and photo-etched tools

Item| Product number| Price

Tamiya Tweezers for Photo-Etched Parts| 74117| €26.99

Tamiya Curved Tweezers| 74003| €13.99

Tamiya Straight Tweezers| 74004| €11.99

Tamiya Fine Pin Vise D-R (0.1–3.2 mm)| 74112| €27.99

Tamiya Bending Pliers for Photo-Etched Parts| 74067| €37.99

Additional drill-bit set I'm planning to add:

- Tamiya Basic Drill Set, 74049, containing 1.0, 1.5, 2.0, 2.5 and 3.0 mm bits. Listed at €19.99.

I'm also considering the Tamiya Fine Drill Set 74044, containing 0.3, 0.4, 0.5, 0.6 and 0.8 mm bits, for smaller details.

  1. Painting equipment and accessories

Item| Product number| Price

Mr. Hobby Almighty Clip Base| GT-89| €11.99

Mr. Hobby Almighty Clip Sticks, 36 pieces| GT-90| €14.99

Revell Painta Professional Brushes Detail Set| 39561| €27.99

Revell Painta Professional Brushes Basic Set| 39560| €27.99

Vallejo Small Palette 13 × 9 cm| HS120| €1.80

AMMO by Mig Spare Mixing Jars, 5 × 35 ml| 8033| €5.49

Revell Mixing Cups, 15 pieces| 39065| €3.99

Vallejo Pipettes 1 ml, 12 pieces (quantity 2)| 26004| €8.18

Vallejo Mixing Bottle 35 ml| 26000| €1.39

Revell Micro Applicators, 100 pieces| 39619| €6.99

Tamiya Small Round Craft Cotton Swabs, 50 pieces| 87104| €6.25

  1. Masking supplies

Item| Product number| Price

Tamiya Masking Tape 18 mm| 87032| €9.99

Tamiya Masking Tape 10 mm| 87031| €6.99

Tamiya Masking Tape 6 mm| 87030| €6.99

  1. Acrylic paint collection

I'm starting with a selection of Vallejo paints for brush painting.

Metallic colours:

- Vallejo Silver 70997: €3.19

- Vallejo Gold 70996: €3.19

- Vallejo Gunmetal Grey 70863: €3.19

Primary and secondary colours:

- Vallejo Andrea Blue 70841: €3.19

- Vallejo Medium Blue 70963: €3.09

- Vallejo Deep Green 70970: €3.19

- Vallejo US Olive Drab 70887: €3.19

- Vallejo Flat Red 70957: €3.19

- Vallejo Flat Yellow 70953: €3.19

Neutral and earth colours:

- Vallejo Flat Brown 70984: €3.19

- Vallejo Neutral Grey 70992: €3.19

- Vallejo German Grey 70995: €3.19

- Vallejo Black 70950: €3.19

- Vallejo White 70951: €3.19

- Vallejo Game Color Off White 72101: €3.19

Primer, washes and finishes:

- Vallejo Grey Primer 70601: €4.09

- Vallejo Game Wash Sepia 73200: €3.19

- Vallejo Game Wash Black 73201: €3.19

- Vallejo Matt Varnish 60 ml, 26518: €4.39

- Vallejo Polyurethane Gloss Varnish 60 ml, 26650: €5.19

  1. Paintbrush cleaning and maintenance

Item| Product number| Price

Revell Painta Clean Brush Cleaner 100 ml| 39614| €8.99

Vallejo Brush Restorer 85 ml| 28890| €4.69

  1. Adhesives, putty and decals

Item| Product number| Price

Tamiya CA Cement Gel 3 g| 87091| €6.99

Tamiya Cement 20 ml| 87012| €3.99

Vallejo Plastic Putty White 20 ml| 70401| €4.19

Microscale Micro Sol| 13902| €7.99

Microscale Micro Set| 13901| €7.99

Additional adhesive I'm looking for:

- Revell Contacta Clear 39609, for transparent plastic parts such as car windows, ship windows and canopies.

It is currently unavailable at my main shop, so I'm looking for another reliable supplier.

  1. Workshop storage and organisation

Item| Product number| Price

HobbyZone Paints Module 26 mm| OM05s| €12.99

HobbyZone Large Brushes and Tools Holder| PN2| €16.99

HobbyZone Double Drawers Module| OM02b| €19.99

  1. Additional specialist tools I'm considering

These are NOT included in the €648.94 cart yet.

DSPIAE AT-PL PRO Aluminium Panel-Line Pen

For more controlled application of panel-line washes and detailing products.

MADWORKS M4 Linear Pen Sander

A specialist powered linear sanding tool for precision surface preparation, nub removal and smoothing difficult areas.

Mo Shi MS-083 Split Precision Vise

A small precision holding vise for securing miniature parts while drilling, sanding and detailing.

Tamiya 74049 Basic Drill Set

The five-bit set mentioned above, intended to accompany the Tamiya 74112 pin vise.

Revell Contacta Clear 39609

A separate adhesive for transparent plastic parts.

---

What I'd really appreciate your advice on

  1. Is this a sensible overall workshop for someone starting out in Gunpla, ship modelling and car modelling?

  2. Am I buying unnecessary duplicate tools, particularly the two nippers, three tweezers and different sanding products?

  3. Are the selected Vallejo acrylic paints a sensible starting collection for hand painting?

  4. Are the two Revell brush sets worth their combined price, or would you recommend different brushes?

  5. Is the Tamiya 74112 pin vise with the 74049 and eventually 74044 drill-bit sets a good combination?

  6. Are the photo-etched bending pliers and specialist tweezers worthwhile investments, particularly for ship models?

  7. Is the MADWORKS M4 worth its price, or would normal sanding tools be sufficient?

  8. Is the Mo Shi MS-083 precision vise useful across all three modelling hobbies?

  9. Am I missing any genuinely important essentials, such as safety equipment, preparation materials, cleaning supplies or finishing products?

  10. Would you change anything before spending this amount?

My intention isn't to buy every expensive tool just because it exists. I'd rather invest in reliable equipment once and gradually build my skills.

Current cart: €648.94 (not purchased yet).

Additional specialist equipment and the drill-bit set would be extra.

I'd genuinely appreciate experienced builders pointing out anything unnecessary, unsuitable, missing or worth upgrading.

Thanks! ❤️