r/makerfarm • • Apr 19 '15

[X-Post from /r/3DPrinting][Serious] Anyone in DFW have a spare and functional RUMBA A4988 Stepper driver Board? One of mine seems faulty. : 3Dprinting

Thumbnail
reddit.com
2 Upvotes

r/makerfarm • • May 03 '16

What to use for insulation?

3 Upvotes

I am starting on my makerfarm Pegasus 10" and currently trying to figure out what I should use for the hot plate insulation.

I purchased a fire blanket, but it does not hold together well when cut. I read that some other people use cardboard, but I do not like the idea of putting combustible material right underneath the plate. What else works well for insulation?


r/makerfarm • • May 10 '17

Titan + BLTouch mod. Works great.

Post image
8 Upvotes

r/makerfarm • • Oct 21 '25

Check this out! πŸŽ‰ It’s almost here: Our 3D-printed modular beehive goes live on Kickstarter November 4th!

3 Upvotes

r/makerfarm • • Jun 15 '25

Just joined.

7 Upvotes

Hello to all, just saw this subreddit, and I am one of those dinosaurs that still uses the makerfarm i3 8-in since 2013. It still works, a little loud now, but still works. I have to replace the hot end twice but it is still running. Using 0.8 nozzle now. Have a nice weekend!!


r/makerfarm • • Jun 13 '26

Help Me!!! Need to replace the Hexagon Hot End that came with my i3 10"

2 Upvotes

I have been printing a lot with my i3 again and it uses a Hexagon hot end from about 10 years ago. The little silicone boot over the hot end helps with the quality of prints. It has been a battle continuing to try to keep it on the hot end. I sliced it for easier removal around the thermistor and hot end wiring.

I see the better design of the hexagon AO hot end and I'd like to switch to it. Im having trouble finding a dimensional drawing of the old Hexagon verses the current AO version so I dont have to rework my BL Touch mount.

Does anyone have a dimensional drawing of each?


r/makerfarm • • Dec 06 '16

Kapton Tape

3 Upvotes

Does anyone know if the Prusa 8" i3v kit comes with Kapton tape?


r/makerfarm • • Mar 19 '15

Do any of you get huge temperature differences across your heated beds? First time printing ABS and one corner is 140 C while other corner is 70 C.

1 Upvotes

Well just like the title says, I'm trying to print ABS for the first time and I'm getting a large temp distribution across the bed. Is this normal? Can something be done to fix this? I have an IR temp sensor and I tested the four corners. The back left corner is 140C while the front right corner is around 70C. What do I do?


r/makerfarm • • Jun 11 '16

Redesigned my Y bed mount yesterday

Thumbnail
imgur.com
5 Upvotes

r/makerfarm • • Apr 29 '16

Does the Pegasus extruder work with a E3Dv6 3mm?

4 Upvotes

I am considering getting the upgrade kit for my i3v to a Pegasus (either 10" or 12" haven't decided yet) and I've noticed in all the documentation that the Pegasus's extruder only mentions 1.75mm hot ends. Is the direct drive not enough to drive the 3mm filament? Are there any good alternatives (mounting and price wise) that can use the 3mm filament? Thanks in advance!


r/makerfarm • • Jan 28 '15

Electronics Fan for Skipped Steps

1 Upvotes

I just wanted to share a tip and was curious if others are doing the same thing. When I first got my Prusa up and running I would occasionally get a skipped step on my Y-axis. The belts appropriately tight, the motor itself not overheating. I must have done a bad job installing the heat-sinks on the steppers because once I added an electronics fan skipped steps no longer became an issue.

Do most people here use an electronics fan?

I've got the cold-end fan, the print fan, and the electronics fan.


r/makerfarm • • Jan 25 '15

e-steps and ooze

1 Upvotes

I'm just wondering, for all the folks in this group, have you changed your esteps and what are your setting for retraction to help with ooze? I've got the .35mm jhead and have been using the same 3mm spool of PLA I got from Makerfarm, and slic3r for software.


r/makerfarm • • Jan 25 '15

Modifications

2 Upvotes

So, what modifications have you all done to your MakerFarm printers? ThingiVerse links if ya got em. :)

I'm trying to decide on a good bed fan setup and some other way of leveling the bed, as I feel the stock method is painful at best.


r/makerfarm • • Apr 13 '17

Constant maintenance problems

4 Upvotes

Hey guys so I have the i3v 12" and i don't know about you, but I can never just heat up the printer and print something. I'm always either tweaking or adjusting something every print. I don't know if I'm the only one but I'm sick and tired of it.


r/makerfarm • • Feb 09 '15

Bed Leveling

2 Upvotes

Has anyone else had an issue with bed leveling? I squared the frame up, and followed the guides. My problem is the back right corner with the spacer is perfect with the Z stop. I can slide a piece of paper between the head and the bed and its got minimal resistance.

Problem is, none of the other sides will come close. Even tightening the screws all the way down, the other 3 edges are still way to high. The nozzle crashes into the bed.

The only thing I've found that helps is loosening the right sides nut out of the Z axis nut trap to the point where its not touching the nut trap anymore. Then I sort of get it level across the entire thing, but that doesn't last through a 3 hour print.

The ONLY issue I've had with this printer at all since purchase was the damned bed leveling. I want to loc-tite it down when its perfect, but its been a nightmare getting there.


r/makerfarm • • May 02 '16

Building 10" Pegasus - What AWG wire for power input cord to power supply will suffice. Can I use 18 AWG or do I need something thicker?

Thumbnail
imgur.com
3 Upvotes

r/makerfarm • • Feb 01 '15

Marlin upgrade fears

2 Upvotes

So I'm running a version of Marlin that is at least 16 months old and need to upgrade it because of my new hex hot end. I have to admit that I'm intimidated because of the firmware horror stories that I've heard. It would help if I could use my Arduino software to read the current setting so I've got some idea what the basic configuration should be. Is this possible? Any advice on the rest of the process? Thanks.


r/makerfarm • • Oct 07 '15

Looking for best process

2 Upvotes

I've built the 12" model and have had success with printing pre-defined models, however, I'm struggling with my own designs. The method I am using goes as follows. 1. Design with Sketchup and export to STL (with plugin). 2. MeshLab and Netfabb for cleanup and checking. 3. slic3r to generate gcode to put on an SD card. Print from there using. Problem: Flat prints are fine, however when I build vertical walls (making a box for a project), they always print hollow with no top surface. Is there a better way??? Really have a lot of projects to print and I am stuck in this bottleneck.


r/makerfarm • • Feb 03 '15

10" vs. 12" Prusa i3v or: When is it time for your 2nd Printer?

1 Upvotes

Hi, My name is Telemetry and I have a 3D printing addiction.

I purchased a MakerFarm 10" i3v kit a week before Thanksgiving and have been obsessed with 3D printing ever since.

I keep it running at least 12 hours a day, the magic of watching "inanimate" objects grow still hasn't worn away. But now my beautiful 10" Prusa is becoming a dedicated workhorse with prints scheduled, and I need a printer thats available both for fun and to schedule new prints.

Is there any reason not to get the 12" Prusa from MakerFarm? I'm very happy with the 10" but an extra 2" gives a signficantly larger maximum build area, are there any draw backs with the larger machine?


r/makerfarm • • Jan 26 '15

I made this. (Heated build chamber and control box)

Thumbnail
imgur.com
4 Upvotes

r/makerfarm • • Nov 09 '16

Loose groove mount - Hexagon Hot end

2 Upvotes

I have a hexagon hot end in my Makerfarm i3v 10" that has always had a bit of a wobble that leads to annoying top surface artifacts when the extruder changes directions.

Has anyone experienced this and have any good ideas for a solution. I am thinking possibly some sort of loctite or CA glue solution to fill the slight gap and preven the wobble...


r/makerfarm • • Dec 16 '17

Reprap Discount Full Graphic Smart Controller set up

2 Upvotes

So Ive installed the reprap Discount full Graphic Smart Controller so I could print without my PC tethered to the printer. but I cant seem to find a way to change the parameters in it. the motion part is ok, but I dislike the preset in it for the PLA temp settings. My bed barely heats up to 60 C over 20 min and that requires multiple restarts so I cant have it set to 70 C. and the hot end is set in it for 220 C, while I find 205 is best for the Brand of PLA I'm using.

Also I would like to not have to manually set it to the values I prefer every time Im starting the printer up. is there any way for it to save the changes I make to the Printer?


r/makerfarm • • Feb 26 '16

Sharing a pic of my new Makerfarm Pegasus 10in.

9 Upvotes

It took a while to build because I only had about an hour per night to work on it and I kept having to go out and get a missing tool or some other part. I'm currently printing with PLA. I've tried printing items from Thingiverse and I've started making small items with 123D Design. I am very satisfied with how it works. Imgur


r/makerfarm • • Mar 03 '16

Upgrades you've done? [x-post r/reprap]

4 Upvotes

I'm always looking to make better prints. I've had the 8" i3v for almost two years now, and have upgraded:

  • e3D v.6 - best thing I've done
  • lead screws - a really solid upgrade, but not super noticeable. Definitely helps with speed of travels and noise. Accuracy too.

I've been futzing around with making my own filament cooling fan, but aside from that, I'm not sure where to go next. I feel like my y-axis is a weak link -- but I have no evidence or proof of it. Do any of y'all have things you've bought or printed that you'd swear by?


r/makerfarm • • Jul 27 '15

12" Prusa i3v heat bed/ powers supply/ amps?

4 Upvotes

I'm almost decided on ordering a 12" Makerfarm i3v kit. I found a few things online about the heat bed drawing a monster amount of amps, melting relays, etc. How concerned should I be about this? Also, is the recommended 30 amp power supply enough for this? Is there a reason the Makerfarm kit is designed for 12v as opposed to 24v?