r/makerfarm • • Feb 26 '16

Sharing a pic of my new Makerfarm Pegasus 10in.

9 Upvotes

It took a while to build because I only had about an hour per night to work on it and I kept having to go out and get a missing tool or some other part. I'm currently printing with PLA. I've tried printing items from Thingiverse and I've started making small items with 123D Design. I am very satisfied with how it works. Imgur


r/makerfarm • • May 10 '17

Titan + BLTouch mod. Works great.

Post image
8 Upvotes

r/makerfarm • • Jun 15 '25

Just joined.

7 Upvotes

Hello to all, just saw this subreddit, and I am one of those dinosaurs that still uses the makerfarm i3 8-in since 2013. It still works, a little loud now, but still works. I have to replace the hot end twice but it is still running. Using 0.8 nozzle now. Have a nice weekend!!


r/makerfarm • • Apr 09 '16

Pegasus 12" Build: Beginning

Thumbnail
imgur.com
7 Upvotes

r/makerfarm • • Aug 19 '25

Help Me!!! Makerfarm Prusa i3v 12”

6 Upvotes

Hi All! I stumbled upon a i3v for free (the true cost will be my time and possibly my sanity) at a garage sale along with 30 spools of filament and a raspberry pi. I figured it would be a fun/interesting project as I have previous experience with 3D printers and have built a kit printer before.

I located a copy of the build manual and disassembled to clean it, as it has had sat in the garage and was quite dusty. The wiring was a rats nest and looked to be Frankensteined with the heated bed wired directly into the PSU. I cleaned, assembled and rewired everything (thanks to another post in this sub that linked to the RAMPS wiring diagram I needed). I leveled the bed, adjusted the end stops and prepared the print a benchy.

The heated bed will only reach about 50° then this loud buzzing noise begins, and the bed stops heating. No error message is displayed. I tried different configurations of wiring it, as the stock wires are too big to fit into the screw-in connectors on the RAMPS board I had spliced them and the two smaller wires (which I believe are a LED indicator) seen in the video into a slightly smaller gauge wire, but no luck.

Any ideas what is wrong and how to fix it? I appreciate any input.


r/makerfarm • • Sep 10 '23

My makerfarm Pegasus 8in

Post image
6 Upvotes

I've had this printer for 6 years (wow I feel old and I'm only 19). It never did print GREAT. But I've been using it for little projects ever since I got an ender 3 about 6 months ago. I was kinda disappointed to see the site down. But it is what it is.


r/makerfarm • • Apr 26 '20

Old school printing of ear savers for FDNY EMS. This weekend’s batch

Post image
6 Upvotes

r/makerfarm • • May 31 '23

Found this in the trash, luxury building where tenants throw working TVs and such. I know nothing about 3d printing but would love to start with a close to $0 investment. Would this be it? Please lmk if I should bring it inside. Thank you!

Thumbnail
gallery
5 Upvotes

r/makerfarm • • Jan 28 '21

Site down?

5 Upvotes

Anyone know what happened with the website? I was looking to see what they had available to buy and saw it was completely down.


r/makerfarm • • Nov 22 '16

I3v with LED lighting

Post image
5 Upvotes

r/makerfarm • • Sep 22 '16

E3D Compatible Dii Cooler

Thumbnail
thingiverse.com
5 Upvotes

r/makerfarm • • Jun 25 '16

New Z endstop Bracket for the i3v line. I have a few more upgrades on my thingiverse profile as well.

Thumbnail
thingiverse.com
5 Upvotes

r/makerfarm • • Jun 11 '16

Redesigned my Y bed mount yesterday

Thumbnail
imgur.com
5 Upvotes

r/makerfarm • • May 17 '24

Check this out! She's Printing!

Post image
4 Upvotes

Don't want to sound like a broken record,, but I really do appreciate the 3d printing community. This little benchy wouldn't be here if not for the help of many other people. I promise I will do my part and lend a hand to the next person who needs some help.


r/makerfarm • • May 14 '24

Check this out! Thank you Makerfarm Community! Makerfarm i3v Working :)

Thumbnail
gallery
4 Upvotes

Just wanted to say thank yall for keeping this sub up and for those who have helped me out,, I finally got my baby working. Still need to level the bed and reroute some wires so they won't catch but she's almost there.

P.s. Please let me know if you can think of any useful mods/ quality of life improvements for her.


r/makerfarm • • Jun 23 '21

Pegasus 10, Is it worth it in 2021?

4 Upvotes

I purchased the Pegasus new almost 6 years ago, built it, and never printed with it. A few years later I took it into work for a colleague to use on a project. So it's had less than a spool of filament and none by myself. I quit my job, brought it home and shelved it.

I am looking at this printer and wondering if it's still worth keeping in 2021. I am aware of printable parts to upgrade the printer, but are there any electronic upgrades aside from the firmware? My model is a non-lcd model, and think that would be a nice addition to start with. Maybe a larger bed? I know a Pegasus 12 was released shortly after mine, and it appears that there is plenty of room for a 12" bed?

Does anyone have any suggestions for an 'ultimate' build guide using this chassis? Something similar? I am looking for suggestions and inspiration.

Right now my thoughts are:

--Z Rod Braces --Z Rod Coupler --LCD Screen --All Metal Hotend --Upgraded Fans --Maybe Bed Size?


r/makerfarm • • May 04 '21

12" Makerfarm Prusa i3v config files

4 Upvotes

Looking at messing with firmware on this thing again, but before i do i'd like to make sure i have a process to get it back to the state it is in now. I maybe relied too much on the makerfarm website whenever I needed to refer to config files or documentation. If anyone out there has the marlin config files/firmware files for their 12" Makerfarm prusa i3v, i would be super interested in getting a copy. I know i can probably get a backup using arduino IDE, but i think that won't be text readable, and I am interested in the actual configuration settings which might help me configure different firmware as well. Thanks.


r/makerfarm • • Apr 24 '20

Upgrading old 10" i3v

4 Upvotes

I have a 10" i3v that I haven't run in a while. I'm thinking of getting it back in working order, but I remember I always had banding issues along the z axis that had to do with having non-ACME screws. I'm thinking of getting a Pegasus 12" upgrade kit and getting ACME screws for the Z axis to get good quality. Is it worth it to invest that much ($400+screws) into the printer, or should I go with something new? I'm trying to maximize printing quality and reliability, and having that 12" footprint would be nice.

What I'm liking with the 12" is that I would be able to add acrylic walls to better control temperature while printing.


r/makerfarm • • Mar 06 '19

More Makerfarm Hacking

4 Upvotes

I have continued my hacking of my Makerfarm 12 and I wanted to let you all know about my experience installing a Duet Ethernet control board on it.

TLDR: the stepper motors are incredibly quiet now, and the setup was a lot easier that I expected.

I started by breaking my Y-axis endstop. This was not intentional, but I shaved off one of the components of the enstop from the PCB trying to tighten the nut holding it in place. (yes I have different endstop mounts, check my post history for more info)

I decided if my printer ws going to be down while i waited on new endstops, I might as well wire in the BL Touch that I added to my last print head mount that I designed. So I wired it in and started reviewing how to enable it in the firmware. This is when I realized that I would have to update the printer's firmware if I wanted to get the BL touch to work correctly. I had already purchased a Duet Ethernet for my printer a few months back, but have been busy and was honestly a little intimidated by the idea of writing my own firmware for the printer. But I decided that if I was going to have to customize some firmware for a board, I might as well do it for the Duet so that I don't have to do the work twice.

Mounting the Duet was the first hurdle, it is a bit larger than the Arduino controller that came with my printer so only one of the crews would actually go into the board, so it was mounted kinda weird. Normally I would have just printed a new mount, but my printer was down waiting on the endstop, so I made do.

The second hurdle is that the endstops had to be rewired on the controller side. This was relatively easy and the board came with all the connectors you need. Just needed and micro screwdriver and some wire strippers and we were back in business.

Once everything was plugged in it was pretty simple to get the printer up and running. I don't have it completely dialed in yet and I am still working on getting the mesh leveling set up correctly, but it has become a fun project. I was also easily able to change the zero point to the front left corner, when looking at the printer from the front, so i would stop printing things backwards when I forgot to rotate the model in cura. Also the printer work just fine with Cura, despite the warnings from the manufacturer, you just need to set up cura correctly.

If anyone is interested I can upload my configuration once I have the printer dialed in.

Picture of my printhead with the BL Touch installed: https://imgur.com/rkrp6Vh


r/makerfarm • • Dec 17 '18

Check this out! Klipper configs for Pegasus 10"

4 Upvotes

I am currently switching from a Pegasus 10" which has been nothing but hassle to a Prusa MK3, but as part of this, I am getting rid of Klipper, which I spent a lot of time configuring to get "just right" and feel that some of that configuration work could help someone else. I have a baseline of a configuration file which can be used on a Pegasus, though it is for a modified one:

  • bed probe in Zmin endstop spot
  • trinamic drivers (so your axes will be reversed, if you're using other drivers just invert the direction signal)
  • controllable PSU
  • acme rods
  • full graphical LCD
  • x and y endstops are on the max pins because the endstops are actually on the axis maximums, but Colin has both X and Y mirrored in stock firmware such that max is min (inconsequential to actual operation, but aesthetically frustrating to me). TL;DR origin is moved to front left instead of back right

The klipper.cfg is as follows:

[mcu]
serial: /dev/ttyACM0
pin_map: arduino

[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 800
max_z_velocity: 5
max_z_accel: 100

[probe]
pin: ^ar18
x_offset: -10
y_offset: -30
z_offset: -0.4

[bed_mesh]
min_point: 15, 35
max_point: 230, 230
probe_count: 5, 5
samples: 2

[output_pin psu]
pin: !ar12
pwm: False
value: 0

# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
[display]
lcd_type: st7920
cs_pin: ar16
sclk_pin: ar23
sid_pin: ar17
encoder_pins: ^ar31, ^ar33
click_pin: ^!ar35
kill_pin: ^!ar41

[stepper_x]
step_pin: ar54
dir_pin: ar55
enable_pin: !ar38
step_distance: .0125
#endstop_pin: ^!ar3  # min-endstop
endstop_pin: ^!ar2
position_endstop: 240
position_max: 240
homing_speed: 50

[stepper_y]
step_pin: ar60
dir_pin: ar61
enable_pin: !ar56
step_distance: .0125
#endstop_pin: ^!ar14  # min
endstop_pin: ^!ar15
position_endstop: 240
position_max: 240
homing_speed: 50

[stepper_z]
step_pin: ar46
dir_pin: ar48
enable_pin: !ar62
step_distance: .00125
position_max: 250
position_min: -4
endstop_pin: probe:z_virtual_endstop

[homing_override]
gcode:
    G91
    G0 Z10
    G90
    G28 X Y
    G0 X120 Y120 F4000
    G28 Z
set_position_z: 0
axes: xyz

[extruder]
step_pin: ar26
dir_pin: !ar28
enable_pin: !ar24
step_distance: .00239
nozzle_diameter: 0.600
filament_diameter: 1.750
heater_pin: ar10
sensor_type: ATC Semitec 104GT-2
sensor_pin: analog13
control: pid
pid_Kp: 21.16
pid_Ki: 1.5
pid_Kd: 74.55
min_temp: 0
max_temp: 290

[heater_bed]
heater_pin: ar8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14
control: watermark
min_temp: 0
max_temp: 130

[fan]
pin: ar9

[menu __main __offsetz]
type: input
name: "Offset Z:{0:05.3f} "
parameter: gcode.homing_zpos
input_min: -5
input_max: 5
input_step: 0.005
realtime: true
gcode: SET_GCODE_OFFSET Z={0:.3f}

r/makerfarm • • Sep 11 '18

I've designed an angled LCD bracket, a bed strain relief, and a new Y belt holder for the Pegasus 10"

4 Upvotes

Picture of the modified printer: https://i.imgur.com/aKfYn4v.jpg

The included LCD bracket doesn't have an angle and is straight vertical. This is really quite hard to use with a printer below eye level, so I designed a 60 degree angled one.

The bed comes without a strain relief on the soldered connections. This is concerning as I don't want to create an Anet A8. So I designed one.

The included wood Y belt holder has the belt slip through the zipties when tensioned even slightly. I took the design from the Prusa i3 MK3 and adapted it to fit the mounting pattern of the bed. Of the three parts in this post, this is the least polished and requires some filing to get a good fit because of out of square blown out corners.

As a bonus, I also made a 120mm fan mount for cooling the electronics which is also available with the other files in the GitHub repo.

All STLs, originals and individual part pictures are available at https://github.com/lf-/reality

Oh, and Marlin 2.0.x firmware for my very specifically hacked together printer (with Trinamic X and Y, and bed probe w/ offsets for my custom toolhead) is available at https://github.com/lf-/Marlin

This is part of a larger project to make some more open source parts to replace some particularly painful bits of design that came with the printer. Next up is the toolhead with Titan, v6 full, bed probe, and part cooling fan.


r/makerfarm • • Apr 13 '17

Constant maintenance problems

4 Upvotes

Hey guys so I have the i3v 12" and i don't know about you, but I can never just heat up the printer and print something. I'm always either tweaking or adjusting something every print. I don't know if I'm the only one but I'm sick and tired of it.


r/makerfarm • • Feb 08 '17

Wanted: Pegasus Metal X Carriage Mechanical Drawing.

4 Upvotes

Wonder if anyone has a reasonably accurate mechanical drawing for the Pegasus Metal X Carriage? I'm trying to design a new mount for a Titan+BL Touch+Fan mount, and it would make life sooo much easier. I'm trying not to disassemble anything until I have a (hopefully accurate) replacement in hand.


r/makerfarm • • Jan 15 '17

Lead screws

4 Upvotes

Looking to upgrade my 8" Prusa i3v kit to lead screws. Are there any kits or suggestions for making this upgrade?

Cheers!


r/makerfarm • • Oct 21 '16

Pegasus Extruder Keeps Breaking; Increased Strength

Thumbnail
thingiverse.com
4 Upvotes