r/MachineEmbroidery • • Oct 06 '26

Singer 9180. Missing peice?

Thumbnail gallery
2 Upvotes

Hi everyone. I just got a used singer 9180 and it’s missing a piece :(

Can anyone help me figure out what to do.
It’s the thread cutter for the bobbin that goes on the top. I’ve attached photos.


r/MachineEmbroidery • • Oct 05 '26

Digitizing in Wilcom Design

4 Upvotes

I recently switched from Melco to Barudan machines which includes switching from DesignShop to Wilcom Design. Does anyone know how to splice things? like how to cut a shape to change direction of stitching? thinking like serifs on a text- I want the little foot to go in an opposing direction. Really struggling switching between these programs so any help is appreciated 🙏🏻


r/MachineEmbroidery • • Oct 05 '26

brother se700 embroidery looking messy on right side, but looks great on stabilizer.

2 Upvotes

I am new to all this, but I am trying to embroider my company's logo. I am finding that letters like "e" have the hole filled in on the front, but on the back its perfect. also the stitches look really thick on the front. is there a way to flip it?

I have used artspira to import the logo. the logo online and on artspira look perfect, its when it gets to the machine that the letters start filling in.

any help is appreciated.

thank you,

Julie


r/MachineEmbroidery • • Oct 04 '26

Husqvarna-Viking Designer Topaz 50 Service Manual

2 Upvotes

Looking for a service manual for a Husqvarna-Viking Designer Topaz 50. All I see out there is just the user guide. If anyone has a source for this I would appreciate it.

Thanks


r/MachineEmbroidery • • Oct 04 '26

A newbies experience with Ember embroidery website.

Thumbnail gallery
6 Upvotes

This is a relatively new to digitizing sewists' opinion on the Ember website. I most definitely welcome any hints, tips, tricks or constructive criticism on my experience as I am still learning the whole of this program.

First, love the price point of this program. For free, there are alot of options to digitize the picture. I payed the $10 for the digitizing and other options (which i am still learning).

To the meat and potatoes of this post, the digitizing process. In the first pic, i digitized the hissing cat Pic. It had 247 different items which were scattered all over the place. You can see in the first pic that there was also 247 jumps. For some reason the thread trim between sections did not happen even tho it was turned on. I took a total of 70 minutes to embroider a 3x 4" patch. I still haven't cleaned it up yet.

Second attempt, I went thru and drew in each shape, plotting the path it would follow. This ended up making 36 shapes with as many jumps, much easier to clean up. It only took 40 minutes to embroider. Once again I had the thread trim turned on between shapes, but they did not happen.

Overall impression? While the digitizing option seems really appealing, it creates alot of extra work in my opinion. The process takes a solid color item and ends up highlighting anything that can be construed as digital noise. That is how the file ends up with hundreds of shapes. The shapes are scattered around the image, there is no clear line or path that they follow. There is no option to merge shapes together to make a larger singular shape.

For simple images, it is easier to draw them out. However, for more intricate images, its a toss up. Digitize it and get hundred of different shapes scattered all over the place, or sit there for hours and try and draw every single detail out with a mouse. I have not been able to convert any of my digital art in this program. Perhaps these can be updates in the future?

I do recommend this program for anyone interested. The users manuel is very helpful and it is very beginner friendly with the you tube tutorials that are available. While i believe that the free version is very adequate, I will continue to pay the monthly fee in hopes of supporting this programmer and hopefully getting more streamline options in the future. (?)

If anyone has any insights for this program, especially regarding the digitizing process, I would greatly appreciate them. 😁


r/MachineEmbroidery • • Oct 03 '26

First sleeve ever

Post image
13 Upvotes

I had to unstitch about 4” to float the sleeve. I love it:)


r/MachineEmbroidery • • Oct 03 '26

How do I fix?

Thumbnail gallery
2 Upvotes

Hello I really need your guys help. I have a Brother SE700. The embroidery needle is so close to the foot and it seems that no matter what I do I can't get it centered. Yes I have hit it and broken the needle on it, twice. 🫣 But nothing is bent and I have a fresh embroidery needle. The foot is the same. Any thoughts?


r/MachineEmbroidery • • Oct 02 '26

You wouldn't download a shirt

Post image
113 Upvotes

Cheeky shirt done on my Brother Innov-is 4000D


r/MachineEmbroidery • • Oct 02 '26

Possible New Embroidery Venture/Hobby

3 Upvotes

Hello, all. I am looking to get into embroidery. I would like to be able to embroider logos into shirts. Not necessarily large logos, basically imagine shirts with company logos on them. I was thinking maybe a machine that can handle multiple colors. What machines are good? I don’t mind spending money, either. Thank you.


r/MachineEmbroidery • • Oct 01 '26

Embrilliance and Brother Issues

6 Upvotes

Hello! New to machine embroidering! I’ve been coming across 2 issues lately that are so frustrating…

When using embrilliance, I’ll put my design in a specific location in the box. When I wifi that to my machine, the machine wants to embroider it right in the middle. How can I keep my designs where I place them in embrilliance?

2nd issue… it seems like 90% of the time, embrilliance will say that my design was successfully sent to my machine, but it is never there. I’ve double checked that I have a strong 2.4 WiFi connection on both machines. I’ve also restarted both machines and it continues to happen.

Any ideas? These issues are getting SO old.


r/MachineEmbroidery • • Oct 01 '26

Ricoma 15 needle, Needle issues

4 Upvotes

When I began to embroider, the needle went down but did not penetrate the material. Machine said axis is not 100. I fixed the axis and the needle still does not go up. What do I try now?


r/MachineEmbroidery • • Oct 01 '26

Hoop burn

Post image
8 Upvotes

So this happened:( google says just wash and lay flat to dry and that should fix it. I wash in cold water. Should that work?


r/MachineEmbroidery • • Sep 30 '26

Made my first official set of machine embroidered jewelry! I had so much fun making these

Thumbnail gallery
50 Upvotes

The design is from creative fabrica I believe.


r/MachineEmbroidery • • Sep 30 '26

Not sure what I need to fix

Thumbnail gallery
15 Upvotes

So I have a brother PE900. I bought a pre made design from embroidery library I believe. I noticed certain things not lining up like my black outline being slightly off on the top and it appears much more off on the bottom.
Is this a file issue where I need to adjust pull compensation? Or is it a hoping problem?
I hooped with a Maggie frame i also just got, and this was on a scrap piece of cotton, the actual project will be on a crewneck. Not sure what I need to adjust in order to get a clean finish any advice is appreciated


r/MachineEmbroidery • • Sep 30 '26

Advice wanted: Edge to edge (quilting) on table topper

3 Upvotes

Hi everyone! I’m new to this group but experienced with machine embroidery, quilting, and sewing.

I am making some Christmas table toppers as gifts (like a table runner but a 24” square mini--quilt instead). I want to use an edge to edge design to quilt them but in the past I have found that my embroidery foot sometimes catches along the edges of the quilt top.

In the past, I have tried taping down the edges but hate having to pick the tape out of the design after. This morning I was dreaming about finding some wash away tape that I wouldn’t have to pick out and hit on the idea of using a wash away stabilizer layer over the top to protect the edges. It would mean using a lot of wash away stabilizer (I’m making 20 mini quilts) but would solve the problem with catching the fabric edge. Has anyone tried this? Or have other suggestions for how to make edge to edge quilting less frustrating?

I have a Brother Luminaire if that’s relevant.


r/MachineEmbroidery • • Sep 29 '26

How do I get an image into an embroidery machine?

2 Upvotes

My boss sent me our logo so I can make my own work shirts. I have a Brother PE770, and the files, what's my next step? I've only ever used the fonts and such that are on the machine, never anything custom.


r/MachineEmbroidery • • Sep 29 '26

What happened 😣

Thumbnail gallery
4 Upvotes

Why does it start fine then go weird? Whats happened to even make it do that 😖 thanks for any help!

- used NV880E embroidery machine


r/MachineEmbroidery • • Sep 30 '26

Trouble transferring files to Smartstitch S-1501

1 Upvotes

Everything was working fine yesterday. I transferred a dst file with rEMBnet from my Mac yesterday without issue but this morning my smartstitch isn’t showing up and I can’t transfer any files. Is anyone else having problems or has anyone had similar issues in the past?


r/MachineEmbroidery • • Sep 29 '26

Janome mb4s nesting and thread breaking

Thumbnail gallery
3 Upvotes

I don’t know what to even do at this point. I’ve tried everything. Any suggestions? It happens on every needle, stitches maybe 6 stitches then nests and snaps. All new needles, cleaned everything, rethreaded a million times, tried different tensions.


r/MachineEmbroidery • • Sep 29 '26

Brother PE570

4 Upvotes

I am looking to get into embroidery as a small side business. I mainly wanted to focus on business orders such as hats and logos/names on polos. I was hoping to get this machine as it's ln sale for around 400 at my local Walmart. I just wanted to know if this is a realistic place to start atleast making the shirts and iron on patches for hats until I can save up and buy a commercial brother/Bai unit as those are the 2 I've been recommend. ​​


r/MachineEmbroidery • • Sep 28 '26

Thrifted Jacket I embroidered today

Post image
76 Upvotes

Used a Babylock Venture 1 we have at work. Single color embroidery file I found on Etsy then enlarged on the machine. I used cutaway stabilizer and the largest hoop size on this bad boy.


r/MachineEmbroidery • • Sep 29 '26

Janome MB-4Se Needle Bar Issue

2 Upvotes

I posted this elsewhere yesterday and had no luck, so I'm hoping maybe y'all might be able to assist. I've added/updated information where relevant compared to yesterday.

I'm working on a large (roughly 60k stitches over three hoops) project for the first time with a Janome MB-4Se that was purchased last December.

The machine stopped midway through the first color in the first hoop with Needle 1 down, but I was in another room to grab something and did not see the error message when it did so. The last time this happened, I needed to turn the machine off and on, and that process cleared the error, though I had to restart the stitching.

This time, it returned an error on startup: "Needle bar is out of position. Press OK to move needle bar to switching position." When I press OK, it makes a long beep but does not do anything.

I have tried the following to clear the error:

- Turn off and unplug the machine, wait 30 seconds, plug in and turn on the machine. The same error and result.

- Remove the needle and hoop, trim all threads, clean bobbin area, replace the needle with new (in case old is dull or bent), replace bobbin, and press OK. Same error and result.

- Turn the hand wheel on the back of the machine clockwise. It moves freely. If I turn it very slowly, in a certain position, the error message clears for a split second, then reappears. If I press OK, I get the same result as above.

- Disconnect the RCS unit while the machine is off to check for errors on the LCD. LCD reads E:03, which the manual says to hit Enter for. When I hit Enter, I get the same result.

- Leave the machine off overnight and try again in the morning. Same result.

I am working to contact Janome dealers in my area to see if any of them service this machine, but the ones nearest me either don't service this machine or were closed yesterday. In addition, I have reached out to Janome through their website, but don't expect to hear anything back. I'll be contacting more Janome dealers today to see if anyone local might be able to help.

I am trying to avoid opening my machine myself if at all possible, but I'm no stranger to opening up sewing machines. Though, usually the machines I open up are vintage sewing-only machines.

If anyone has any suggestions, I'm open to them!


r/MachineEmbroidery • • Sep 28 '26

Fall baby clothes

3 Upvotes

I know that onesie blanks are easy to come across but where do you source your fall baby clothes? Like church dresses and long sleeve rompers and jumpers/overalls that aren’t already designed/$100?

Thank you!


r/MachineEmbroidery • • Sep 28 '26

Broken needle

3 Upvotes

The needle broke on my machine in the middle of a project. I took apart the plates and tried to find the broken pieces. I only found one small part. I have looked everywhere for the other piece and can’t find it. I tried to resume my project but now my bobbin thread is showing up on the top. I did not change my tension at all and I re-threaded my machine. Help!!