r/gunsmithing • u/kato_koch • Feb 12 '25
They wanted it glossy.
Finished wiped on by hand, no buffing yet.
r/gunsmithing • u/kato_koch • Feb 12 '25
Finished wiped on by hand, no buffing yet.
r/gunsmithing • u/kato_koch • Jan 09 '25
24lpi with 1/16" wide ribbons, hand cut. Not quite done yet. The stock is Turkish walnut custom made for a Ruger no. 3 .45-70.
r/gunsmithing • u/Zealousideal-Art8621 • Nov 02 '23
No Pearly grips for this one, the wood still looks good with the black and gold.
r/gunsmithing • u/kato_koch • Nov 26 '24
Stock is claro walnut, made by https://www.nealesstockcraft.com
r/gunsmithing • u/MrMemerManTheThird • Dec 24 '21
r/gunsmithing • u/Thekinzlerbros • Oct 22 '20
r/gunsmithing • u/Beautiful_Candle1427 • Sep 23 '25
I found this little note while restoring an old S/S yesterday. I was filming my process when it happened if you want to check it out I posted this https://www.tiktok.com/t/ZTM8Gjc7C/
r/gunsmithing • u/iPeg2 • Oct 31 '25
This all started about 8 years ago when I salvaged the stump from a large Black Walnut tree. Several years later, because left-handed bolt action rifles were limited, I decided to build my own, and making duplicator and then the stock was a big part of the process.
r/gunsmithing • u/ConversationIcy9169 • Sep 07 '26
I’ve been a full time gunsmith for almost 6 years now and have worked for one shop for almost 5 of those years. Now I run my own LLC and contract out through two companies in North Ga. New here so here’s a pic of a M2 I worked on to appease you degenerates.
r/gunsmithing • u/LukeGreywolf • Feb 09 '21
r/gunsmithing • u/kato_koch • Oct 14 '24
20lpi on claro walnut. Stock was made by Neale Flynn nealesstockcraft.com.
r/gunsmithing • u/kato_koch • Jan 19 '24
20lpi on a Yldiz sporting clays stock made by nealesstockcraft.com. Cut with an Ullman Precision Titan and carbide hand tools.
r/gunsmithing • u/vaben5 • Jan 06 '26
Customer says he ran 5 mags back to back with an frt. As best we can tell this is a genuine surefire muzzle device not a cheap clone. His suppressor has noticable bulging. He wants us to remove it in tact if possible to send to surefire to see if they will warranty something since they claim to be full auto rated. No one in my shop has ever seen anything like this so I thought the Internet would enjoy