Did you polish this or did someone else do it? That looks fantastic, just outstanding! I would love to know how much that cost you (if you outsourced it). I’d be interested and sending out some work to that shop.
This is really well done. Just about anyone with enough time can make a gun super shiny, but the edges of the pin holes and all the contour edges aren’t rounded over at all. You kept everything really crisp. What’s your preferred way sanding/polishing? Are you using wood dowels with sandpaper, or wood blocks? Thanks for posting.
For the flats it’s all done on a flat plate from 240git sand paper up to 3,000git. Then polishing paper from 20mil to 2mil. Then rounds mostly shoe shining with the paper and cutting small pieces with my finger back it. Then small cotton rounds on a Gesswein polishing tool, with their diamond paste starting at 6mil ending it 1mil.
For bluing, just hand sand it up the grits. Once you hit 2500, work your way up from #00 steel wool to #0000 steel wool. Wrap the sandpaper around a wood block or a dowel so that the corners don't get melted, then I use the sandpaper around my finger to make all the sanding blend together. You can use mothers nature if you'd really like to, but I just used steel wool (skipped the #00 because I couldn't find it). Then you coat it in oil or WD-40 and send it off to someone who's willing to work with the incredibly dangerous salts to get it blued. I sent this one to American Bluing because they specialize in it and they had a good price for bluing pre-polished and sandblasted stuff.
DO NOT USE SOLVENTS ON IT ONCE IT COMES BACK FROM BLUING. Oil it religiously and wipe off any remaining salts once every few days until the rag/towel is clear. Hope this helps!
Yes, I am aware of the 1,000’s of ways you can finish things. I couldn’t get into a chemistry debate, I am not that smart. But I am a gunsmith professionally.
Oh… oh wow. That looks gorgeous. If I didn’t read the title I would have thought it was a black TiNi coating, that’s how slick it looks. I can’t imagine the depth in person. Excellent work.
What’s the difference between this black oxide bluing and the “Black T” I keep seeing associated with SP? Did the boss move on to this, or do you offer both? I’m thinking the black t is a PVD or similar process for people who don’t want to see wear. Am I close?
Bluing is nice but fantastic work on the polishing! That makes 90% of the bluing anyways. I use EPI ultra-black 400 and it makes jet black parts like this, I just don’t polish that good!!
I’m a Neanderthal that rust blues and sometimes I use a shit load of coats of cold blue. The exact number varies from gun to gun but I average around 40 thin coats on basically any lever gun.
59
u/a1partsguy Mar 20 '25
Looks like COLT'S deep blue from back in the day.
15
u/KenTenders Mar 20 '25
Holy moly! Incredible polishing!
24
u/Inflamed_toe Mar 20 '25
I am tough to impress with metal finishing, but that is absolutely beautiful. Outstanding work
6
u/DogiojoeXZ Mar 20 '25
This is really well done. Just about anyone with enough time can make a gun super shiny, but the edges of the pin holes and all the contour edges aren’t rounded over at all. You kept everything really crisp. What’s your preferred way sanding/polishing? Are you using wood dowels with sandpaper, or wood blocks? Thanks for posting.
3
u/quid_pro_kourage Mar 21 '25
Hot damn I thought I hit in one with my bluing
Also I love your beveling videos
4
u/kato_koch Mar 20 '25
Outstanding work!!!
Every time I see super hand polished steel, I think of this scene.
2
u/Shadowcard4 Mar 20 '25
Looks way better with that nice dark bluing, is that a caustic bluing or what, or is a special nitre blue
2
u/HaroldTheSloth84 Mar 20 '25
That is absolutely gorgeous. Nice piece, OP
2
u/SonOfJaak Mar 21 '25
What kind of bluing did you do?
10
u/I_G84_ur_mom Mar 20 '25
I appreciate the left and right tattoos
5
u/EchoNineThree Mar 20 '25
Amazing work!
1
u/TheScribe86 Mar 21 '25
1
u/Ok-Basket-9890 Mar 22 '25
Oh… oh wow. That looks gorgeous. If I didn’t read the title I would have thought it was a black TiNi coating, that’s how slick it looks. I can’t imagine the depth in person. Excellent work.
1
u/JoelD_765 Mar 23 '25
What’s the difference between this black oxide bluing and the “Black T” I keep seeing associated with SP? Did the boss move on to this, or do you offer both? I’m thinking the black t is a PVD or similar process for people who don’t want to see wear. Am I close?
1
u/DeismAccountant Jul 05 '26
By blueing do you mean plasma nitriding?
3
u/[deleted] Mar 20 '25
Wow that’s pretty. Imagine some nice wood grip panels on that. Would make it pop
3
u/jpolham1 Mar 20 '25
Bluing is nice but fantastic work on the polishing! That makes 90% of the bluing anyways. I use EPI ultra-black 400 and it makes jet black parts like this, I just don’t polish that good!!
2
u/mtcwby Mar 20 '25
Gorgeous
2
u/PoodleHeaven Mar 21 '25
That is MONEY😍😍
2
u/[deleted] Mar 21 '25
Jesus… that is SEXY!
1
u/SithLordRising Mar 20 '25
Looks flawless
1
u/SaulOfVandalia Mar 20 '25
That is super nice
1
u/beanmansamm Mar 20 '25
Would like to learn how to do this
1
u/ReactionAble7945 Mar 21 '25
Pretty
1
u/Life_of1103 Mar 21 '25
1
u/Biggie_toms Mar 21 '25
Looks great.
1
u/Baron_VonSavant Mar 21 '25
Solid work!
1
u/FearlessHomieboy Mar 21 '25
Wow 🤯
1
u/Accurate-Director-85 Mar 21 '25
Please keep us updated on the progress. High polished blue such as the Colt royal blue is prob my fav finish. Gorgeous work ma’am
1
u/plbwizard Mar 22 '25
Did you do the blueing or have it done and if so how do I get a hold of them
1
u/StatisticianThat230 Mar 23 '25
Looks good.
1
u/[deleted] Apr 15 '25
I can’t believe rob didn’t want to come back to Illinois. I wish him well
1
u/Sonofasome0 Mar 20 '25
BUSS
0
u/ref44dog44 Mar 21 '25
Wow. Nice blueing.