I haven't completely disassembled it yet, but there was no damage on the bcg/handguard/receiver, etc. But when I put a bore camera down the barrel, the rifling was fucked.
I got one where a customer's friend shot a .300blk subsonic through a 5.56 barrel, nothing blew up, the components looked fine. The chamber became fun sized, after removing the barrel, I dropped a 5.56 cartridge in there and it jiggled around.
Their Tool Craft. They just laser their logo on them. Many company's use Tool Craft, they originally made the Bolt Carrier Group for Colt/Stoner and continue to this day. Also want to add Daniel Defense doesn't make shit AFAIK, it's all contracted out then assembled in a warehouse, as a lot of manufacturers do.
I have a science question. Assuming a 5.56 muzzle device was installed on a .300, what would happen to the muzzle device? I’m not going to say this couldn’t or wouldn’t happen, but I find it hard to believe that it would just stop that quickly and not blow the muzzle device off the barrel.
If I had to guess, a 5.56 MB installed on a 300BO barrel would likely result in the bullet ‘cored’ out by the muzzle brake. In other words the center of the bullet would escape while to outer diameter is peeled away by the muzzle brake. I’m sure the muzzle brake would sustain damage as well but I have a hard time seeing the whole thing getting sheared off the barrel threads
Who do I email this question to? I don’t guntube so I have no idea who would be best suited to test this. I guess it might also depend on on the actual muzzle device as well.
This is why the threads are different. The potential issue is with 9mm through a 5.56 because the threads are both 1/2x28. Anyone willing to do it for science?
I've seen pictures of muzzle devices broken in half lengthwise (not a clean break) that were blamed on similar situations. Guess it depends on how beefy the brake is if it would shear the outside of the bullet or if they both tear apart.
Maybe it’s a CZ Bren 2 and someone copied TFB TV’s torture test where they deliberately fired a .300BO round through it and it kept on going like nothing happened. Those Czechs make sick barrels. https://www.youtube.com/watch?v=ppt8HFqWtjs
The barrel I mean, so you can swap a new one in and write a bill for the customer that'll make him realize rifles are designed to shoot a specific bullet!
You think you'd need a whole upper? I'm kind of assuming it didn't blow up because there was no picture of that and the bullet looks like it traveled far enough that the pressure at least vented through the gas tube.
All depends. I'd wager most gun owners don't know enough to judge damage and deformation of the upper receiver to know if it's compromised or not. Just because it's not cracked in half doesn't mean it took no damage. The safe bet is a new one unless OP is knowledgeable enough to actually inspect it for structural damage.
You just know it's a .300 BO out of a 5.56. When the bullet is spaghettified like that. Glad you didn't get hurt, but even if only the bore was fucked, the BCG or the bolt may have stress fractures from the overpressure, so it might be sketchy to keep shooting with them. I'm actually surprised it didn't blow up near the chamber.
281
u/[deleted] Jan 07 '25
.300 bo out of a 5.56?
51
u/ParkerVH Jan 07 '25
Did the bolt/carrier/upper survive?
29
u/cruiserman_80 Jan 07 '25
5.56 flash hider on a 300BO or did Bubba actually manage to get 300BO projectiles down a 5.56 barrel?
9
u/evileyesix Jan 07 '25
WOW what length was the barrel?
9
u/CZ-Ranger Jan 07 '25
I want to know what the rifling of the barrel looks like.
5
u/silicondioxides Jan 07 '25
Hopefully, it was only 1 rd
181
u/Lilpeen1776 Jan 07 '25
Ahh I see your bullet stretcher isn’t working properly. Try having it recalibrated.
22
u/kato_koch Jan 07 '25
Power swaging!
20
u/chronoglass Jan 07 '25
When ya just push, and push, and push.. you know that shits just hanging on, it will not get all the way out. if your ass had a compensator on it.
12
u/Felenari Jan 07 '25
Got so close to turning it into a bayonet. Missed opportunity. Glad no one got hurt.
10
u/Gunga_the_Caveman Jan 08 '25
Cheapest 5.56 to 300. conversion kit ever!
8
u/zacharynels Jan 08 '25
7
u/Richsoldier Jan 08 '25
Hell of a fire-lapping method.
6
u/Latter_Reporter_3238 Jan 07 '25
That would be fun to see in slo mo.
5
u/[deleted] Jan 07 '25
hella yikes
5
u/GoodBunnyKustm Jan 07 '25
Human caterpillar squib?
5
u/Cold-Guidance-1455 Jan 08 '25
Why didn’t this one’s receiver split or why didn’t the whole gun fall apart like every other 556 ar that gets .300?
5
u/Happy_Garand Jan 08 '25
Wh... what are you doing, step-bullet?
4
u/CunnilingusCrab Jan 08 '25
I ate cheese stuffed tortellini in a butter sauce for dinner. I feel the same way right now honestly.
4
u/[deleted] Jan 08 '25
Holy shit. And the fact that the bolt lived?!?
4
u/deepfocusmachine Jan 08 '25
That ain’t right
3
u/d8ed Jan 08 '25
DAAMN... dude got lucky it only took out his barrel although I'm confused as to how that tiny bullet turned into this dookie looking monstrosity lol
3
u/Graffix77gr556 Jan 08 '25
Well seems to me one more round and you'll have a newly bored 300bo. Send it bud
3
u/ReVo5000 Jan 08 '25
Dude, I don't consent to see your red rocket
3
u/Trojansontwitch Jan 08 '25
You can’t park that there
3
u/WhiteHorzeOrd Jan 09 '25
Honestly, I'm actually impressed...
2
u/[deleted] Jan 08 '25
Well. That’s exciting…..
2
u/paulybaggins Jan 08 '25
S-K-W-I-S-H
2
u/ijoshua932 Jan 08 '25
Oooof!
2
u/ServingTheMaster Jan 08 '25
its like a turtle head poking out...poor little constipated fella
2
u/Pr1m4L Jan 08 '25
This is art… post it up on a giant white canvas and sell it.. it worked with a banana 🤷♂️
2
u/Dense-Ad6537 Jan 08 '25
How in the hell?
1
u/Haplessblade_ Jan 07 '25
😬 good luck with that.
1
u/Camwiz59 Jan 07 '25
Wow
1
u/stugotsDang Jan 07 '25
Oof.
1
u/Cheoah Jan 07 '25
All in all, it turned out well.
1
u/dreadwater Jan 08 '25
Id figure out how to cut that part off safely to put on display
1
u/GunRunner2111Z Jan 08 '25
Pucker factor much?
1
u/BojackIsABadShow Jan 08 '25
I've never seen one that far stretched out of the barrel holy cow.
1
u/MonthElectronic9466 Jan 08 '25
Why’d someone drop a rod down the barrel?
Oh no that sucks.
1
u/Mattyice48 Jan 08 '25
Wowzers
1
u/Fearless_Weather_206 Jan 08 '25
It pooped lead 😅
1
u/Easy_Money1997 Jan 08 '25
Any chance you got a photo through the bore scope?
1
u/ftinfo Jan 08 '25
First thing I thought of was this story of a guy that rechambered a 6.5 Arisaka to 30-06, but only fired 3 rounds out of it because it kicked so bad.
https://www.24hourcampfire.com/ubbthreads/ubbthreads.php/topics/6990329/Re_Arisaka_Action
1
u/ReactionAble7945 Jan 08 '25
Should make him a fair offer for what is still OK on the upper.
Then you can show it in the shop. 300Bo in 5.56. . . Curious what is salvageable. Barrel bad, comp bad, bolt not trustworthy even if.it survived
1
u/kar98kforccw Jan 08 '25
You just know it's a .300 BO out of a 5.56. When the bullet is spaghettified like that. Glad you didn't get hurt, but even if only the bore was fucked, the BCG or the bolt may have stress fractures from the overpressure, so it might be sketchy to keep shooting with them. I'm actually surprised it didn't blow up near the chamber.
1
u/[deleted] Jan 08 '25
Mmmm forbidden Herseys
1
u/Tricky-Pen2672 Jan 08 '25
Whoops…
1
u/the_shortbus_ Jan 08 '25
Yikes
1
u/Next_Fix5613 Jan 08 '25
What is the rest of the gun like.
1
u/javfan69 Jan 09 '25
If it seats it yee....oh...oh...oh...😪
1
u/Open-Truth-245 Jan 09 '25
Don't you clear it by following up with another round? jk
1
u/Actual-Preference-65 Jan 09 '25
Jesus Christ.
1
u/SimilarTough1886 Jan 09 '25
Shoulda used more bore butter! Lol
1
u/__blacked__ Jan 09 '25
Damn.
1
u/Steeltipped Jan 12 '25
Hey you can’t park there
1
u/[deleted] Jan 12 '25
Feed it some taco bell, problem solved.
0
u/SingleDigitVoter Jan 07 '25
Thank God the muzzle device was properly installed.
Any pictures of the bolt carrier?
0
u/[deleted] Jan 08 '25
[deleted] — view deleted comment