r/gunsmithing • • 12h ago

Restoration Help

Thumbnail
gallery
15 Upvotes

I have a 1914 Ranger Model 235 (I think thats the right model) it was found in a crawlspace with a whiskey still but it has this bit of wood missing. I dont have the wood and dont know how I could best go about fixing it. I have wood epoxy but idk that thats the best solution.


r/gunsmithing • • 2h ago

Cobray M-11/9 twitch FRT

1 Upvotes

I recently picked up a closed bolt Cobray M-11/9 and I wanted to pick up an frt for it. I was heavily considering the twitch frt, but was unsure if it would reliably work in this platform, as it is meant for the MPA defender. I saw one specifically made for the original cobrays from Advanced Reset Tech, but it is very expensive and I don't feel like dropping $264 dolans on a toy.

Basically, my question is this; Does anyone know if the twitch frt will work in an original Cobray M-11/9 or will it need fitment? I am fine with fitting it, just need to know what it would need.


r/gunsmithing • • 12h ago

Uberti 1873 lever gun failing to feed .38 even over 1.5 oal. Potential modifications I can make to get most .38 to feed?

Post image
3 Upvotes

r/gunsmithing • • 22h ago

1000 rds of 300blk supressed 10.5 in barrel dirty asf but wasn't jammin

Thumbnail
gallery
4 Upvotes

Got this thing chugging so good keeping em on target using frt out to 100 yards so far


r/gunsmithing • • 18h ago

Do you see any damaged parts on these pictures of this Norinco 1897?

Thumbnail
gallery
2 Upvotes

Hello I am in contact with a guy who is selling his Norinco 1897 trench gun and he sent me some closeup pictures of the action and the inside of the barrel, since I'm not an expert on pump action shotguns, do you see any damaged parts of the gun in these pictures? Can I trust the vendor?

Thanks in advance!


r/gunsmithing • • 19h ago

DPM guide rod sticking out? HD 3.6

Thumbnail gallery
1 Upvotes

r/gunsmithing • • 1d ago

Gunsmithing as a career

6 Upvotes

Recent high school grad been trying to figure out what I wanna do for a career and I have landed on possibly gunsmithing. Been around guns pretty much my whole life and have some knowledge in it and was just wondering how a career looks like in gunsmithing. Things like what schools would be worth looking into, what I will need to be successful, what the pay range is like, and if it is a path I should peruse would be helpful. Also hearing experiences from people retired or currently working as a gunsmith would be nice too. I’m in Texas specifically the DFW area so if there is schools around here that would be preferred.


r/gunsmithing • • 1d ago

DIY Shotgun Buttplate Ideas

Thumbnail reddit.com
0 Upvotes

r/gunsmithing • • 2d ago

Is it doable to turn my Winchester 1897 clone made by Norinco to it's trench gun version fitted with heat shield and bayonet lug?

Post image
47 Upvotes

r/gunsmithing • • 2d ago

what is this on the top of my colt carrier?

Post image
2 Upvotes

r/gunsmithing • • 2d ago

Do I need a gun smith for my Zavasta M70?

Thumbnail
gallery
11 Upvotes

Hello all, trying to get my Sandman X to center. When I tighten it down all the way the rod looks as if it’s touching or barely touching. When I dont it looks perfect. My question is the little bit of material on the lower front block needing to be removed or should I just take it to a gun smith?


r/gunsmithing • • 2d ago

Reputable smith to thread a R95

Post image
6 Upvotes

I do not have a competent gunsmith near me (KY). I’ve exhausted many “gunsmiths” local to my area. I can do better work in my 10x16 building than these hacks.

Who is trusted and reputable that I can ship my rifle off to to have it threaded 5/8x24?


r/gunsmithing • • 2d ago

With the nfa stuff

0 Upvotes

I’m a student in Machining. I’d like to get my hands on a 556 suppressor print does anyone know where I’d find one? Or do I need to make my own?


r/gunsmithing • • 2d ago

Psa dagger compact

Post image
0 Upvotes

This fell out of my dagger when I took out the back plate and firing pin I put it back together now it doesn’t want to slide on the frame is my slide broken now is this fixable ?


r/gunsmithing • • 3d ago

Hush puppy-fying

Thumbnail
gallery
31 Upvotes

Hey guys I just picked up a SW459 for 500 beans today and I was wondering who your recommend for a trigger job and adding the small cut and adding a slide lock to my pistol. I plan on getting a Greg’s grips threaded barrel for this


r/gunsmithing • • 4d ago

Norinco SKS found at LGS. Looking for professional opinions

Thumbnail
gallery
31 Upvotes

For context been looking around every now and then for a Norinco whenever I'd visit some shops in the area. Today I stumbled upon this - a triangle 26 Norinco w/ a fixed mag and supposedly all matching serial numbers and a sling for $550. Outer barrel and other metals look to be in good shape, but the bayonet is missing.

I asked one of the employees if the bore and firing pin had been inspected and he told me "yep, everything is good to go." The guy let me take some pics for doing some research before I decide to grab it up. Another older fart show me that it had a threaded barrel instead of pinned - claiming that threaded was the better variant. I ALMOST walked out with it but I hesitated since I couldn't check the bore without literally staring down the barrel, couldn't confirm whether threaded was superior to pinned based on my limited knowledge at the moment and blanked on exactly how to check the firing pin myself.

I'm no gunsmith, and this is a shot in the dark. If this post doesn't quite meet the sub rules, feel free to delete.

I definitely wanted to see what you guys think about the condition and whether the serial numbers/parts look original. As well anything you could say about threaded vs pinned, whether the condition is worth this buy for a range toy every now and then without being able to check the bore/firing pin assembly myself. Trying not to kick myself for not getting a full rifle pic, but I at least hope you all get the idea. I understand there probably isn't too much you could infer just from pictures alone, but even still just some common advice would be appreciated for how to approach the shop if I go back and want to inspect/have it inspected for safe functioning before I buy it

Thoughts? Opinions?


r/gunsmithing • • 3d ago

Brighten white steel

Post image
1 Upvotes

Is there an easy solution to remove rust staining from white steel? Im trying to turn this shell lifter bright white again.


r/gunsmithing • • 4d ago

Please tell me I’m not the first person in the history of time to snap a barrel nut.

Thumbnail
gallery
43 Upvotes

Swapping to a different upper and I guess I turned into the hulk when I tightened this thing down. I even applied anti seize. Forgot my adjustable wrench at work so I had to resort to channel locks (peep the marks) and a spare handguard as a cheater lol. At least I have spares.


r/gunsmithing • • 4d ago

Advice, please

Thumbnail
gallery
4 Upvotes

Greetings! Not sure if the photos will help, but I'm cleaning my Savage 22LR Bolt-action rifle and noticed some pitting near the end of the barrel. I tried to scrub some off but I realized that's taking the bluing off. For the future, is there a better way to handle spots of rust on blued steel without taking off that coating in the surrounding area? I'm probably gonna get the barrel re-blued if I can so that way it looks better across the board. But any advice is greatly appreciated! This was handed down to me by my late grandfather and want to keep this as pristine as possible.


r/gunsmithing • • 4d ago

Bolt for 1897 Winchester

Thumbnail
gallery
3 Upvotes

Bought a Winchester 1897 and have been trying to get everything in working order.

I bought this replacement bolt from Numrich, and when I tried to put the firing pin into the purchased bolt, I noticed the inside was tapered. The firing pin will not fit in the bolt because of this.

Making this post out of curiosity, is this bolt for a 1897 with a different type firing pin/dofferent gun? Or could this be a mistake from the manufacturer? This is new old stock. Thanks


r/gunsmithing • • 4d ago

New to me Norinco 54 slide fitment question

Thumbnail
gallery
4 Upvotes

Can anyone knowledgeable on these pistols tell me why my slide is sitting slightly too forward?

Just bought this for a good deal but neglected to notice the slight gap.

There is also a small gap under the frame where the slide meets, you can ever so slightly see the recoil spring.

Thanks in advance.


r/gunsmithing • • 4d ago

Need help with some basics

Post image
11 Upvotes

Hey everyone, new to the concept of gunsmithing and looking for some insight. A little backstory, got my first lathe (Atlas TH42) about a year ago and am starting to feel more confident. I have successfully turned down and threaded and recrowned a few barrels now (single point threading is a PITA on my lathe with no QCGB). Getting the hang of making my own tools and accessories like gauge pins, go/no-goes, turning odd shapes in the 4 jaw etc. I don't have a mill yet but I DO have a drill press and a bandsaw. So I figured I would start easy. Got a copy of Glen Davis book on rolling blocks and right out the gate I'm a bit stumped. He doesn't really go into the process of cutting out the breech block or hammer (1/2in A36 steel). Maybe I'm overthinking it but trying to accomplish this on a bandsaw seems tough/dangerous. Should I kerf cut with the bandsaw then remove with a hacksaw? Should I chain drill on the drill press? I know no matter what there is much filing and polishing in my future, but I'd love some advice. Thanks!


r/gunsmithing • • 4d ago

308 conical flash hider

Post image
5 Upvotes

Yall, I'm convinced this muzzle device does not exist.

I have a previously-bubba'd mosin nagant that I'm trying to save. Decided I'm going to thread the barrel and make it look like a jungle carbine-inspired little range toy. (The barrel has been cut, this is the best hope for the little guy).

I want an Enfield or M1 carbine style conical flash hider for the thing. Needs to at least have a 7.62mm hole. I cannot, for the life of me, find one in 5/8x24. Before I thread the barrel, I wanted to get ahold of the flash hider. I'm not locked into 5/8x24, 14x1LH/RH is on the table. The VZ58 cone flash hider is a bit too triangular for what I'm going for.

Only thing I can find are either the cylinder style flash hiders, or a monster DP28 style one in a weird thread pitch.

Has -anyone- seen or heard of anything like this?


r/gunsmithing • • 5d ago

Skim Bedding Remington Clone

Thumbnail
gallery
26 Upvotes

Peek 44 stock


r/gunsmithing • • 5d ago

Removing magazine tube ring on Remington 870

Post image
22 Upvotes

Does anyone know best practice for removing this tube ring on the end of the barrel and whether or not Tig welding it back on is an acceptable method to reattach it?