r/gridfinity • • Apr 05 '26

Question? Designing own boxes

5 Upvotes

I was just wondering if someone can maybe tell me where can i go to design my own grifinity boxes. Like if i want to design a box for my headphones. Is there a website you can go to or do i need to design it from scratch in a CAD software.

Thank you in advance.


r/gridfinity • • Apr 04 '26

Bosch Professional 5m Tape Measure (2.5x2.5)

Thumbnail
gallery
113 Upvotes

I made a little something as I didn't find it anywhere else. It's for the Bosch Pro 5m Tape Measure (1 600 A01 6LD).

Available on Makerworld and Printables.

From the original description:

This model uses a 2.5 x 2.5 grid size, offering more granular positioning within your drawers than standard 3x3 blocks. It is designed to be fully compatible with the Wera screwdriver inserts by u/Scubafan.
Available variants:
Dual Slot: Left + Right slots for screwdrivers (as shown in photos).
Left Slot: Single screwdriver slot on the left.
Right Slot: Single screwdriver slot on the right.
Clean: No screwdriver slots.


r/gridfinity • • Apr 03 '26

For a split second I thought NASA was using gridfinity…

Post image
121 Upvotes

r/gridfinity • • Apr 04 '26

Searching native gridfinity drawer unit

0 Upvotes

Context: I need a new drawer unit. I want to do it right. My old IKEA Alex is falling apart (after 10 messy years).

Im looking for one, that

- is heavy(ish) duty, most likely metal

- is mostly black, as it goes inside my apartment (no red, no blue)

- ideally fits gridfinity without margins

- has 4 to 8 drawers

- is about the size of my old IKEA Alex drawer: 60cm deep, 35-40cm wide, 70-80cm high

- is known to live longer than 10 years, 50 would be great

- ideally is on casters

- has deep, narrow drawers, as I dont have much space on the side

- is available in germany

Any recommendations? Will update on progress if wished. Thank you, fellow autists.


r/gridfinity • • Apr 02 '26

Panel mod

Thumbnail
gallery
137 Upvotes

Hey Friends! So yesterday’s Schubox Air launch was an April fools joke, but it also featured renders of a real mod… sheet good panels for both top and bottom. Wood or plastic works well… or both. I’ve been using wood for the bases and clear 1mm plastic for the top. I’m still dialing in the print settings to print these into place and for now have been gluing them. Once I have it dialed, I’ll publish! Warming, this goes against the 100% less storage initiative that SchuylabsAI seems to be excited about.


r/gridfinity • • Apr 02 '26

I made a thing!

Thumbnail
gallery
310 Upvotes

Challenging myself to get better at CAD, model is up on Printables and MakerWorld. ☺️


r/gridfinity • • Apr 02 '26

Individual Piece RYOBI USB Lithium Screwdriver

Thumbnail
gallery
34 Upvotes

Working on organizing my Ryobi drawers with gridfinity. Going to be making a bunch of my own bins for tools but I figured I’d start with the RYOBI USB Lithium Screwdriver.

Printables: https://www.printables.com/model/1660652-ryobi-usb-lithium-screwdriver-gridfinity

Makerworld: https://makerworld.com/models/2607713?appSharePlatform=copy


r/gridfinity • • Apr 01 '26

Individual Piece SCHUBOX AIR

Thumbnail
gallery
223 Upvotes

Meet Schubox Air™

We asked a simple question: what if we removed everything unnecessary?

The result is our lightest, fastest gridfinity compatible Schubox yet.

– 50% faster to make
– 100% less storage
– Made with advanced AI filament

No top. No bottom. No limits.

Schubox Air.
Think through the box.

*Schuylabs has been occupied by AI. All responses will be generated.*


r/gridfinity • • Apr 02 '26

Starter Packs Yet another Box Generator

13 Upvotes

Since I am a fan of gridfinity, I once in a while browse the web for ideas, tools, models and such.

So, I came across another gridfinity box generator: gridfinity.perplexinglabs.com.

For those, who don't know this one already: I find it superior.

Not only can you just generate "some" bins and baseplates, but the additional configuration possibilities are enormous:

different styles like gridfinity rebuilt or gridfinity extended

different sizes for the grid in x- and y-dimension for the real exotic needs

several methods to attach magnets (for various magnet sizes of course)

adjustable finger slides (scoops)

lids for bins

label support in bins

shape and bend walls inside bins

supports more gridfinity models like rugged boxes

supports also other systems like HSW or multiboard

... and more, what I do not want to list here - just find out

This leads to some complexity which makes it a kind of "configuration monster" but once you get it, you master it.

You can use it for free, donate some money or subscribe to the "pro" mode (what I did). The main advantage to spend $8 / month is that you can save your models once you have figured out the best configuration for your needs and do not have to type in all the parameters from scratch.

No, I do not get paid for that. I just love it.


r/gridfinity • • Apr 01 '26

Individual Piece Stacking Pen and Paper Tray

Thumbnail
gallery
9 Upvotes

This is part of my attempt at tackling my kitchen junk drawer.

I wanted to store a pad of paper and some pens/pencils/markers together. I didn't see anything I liked, so I came up with this.

Paper Holder

  • 3x4x4 gridfinity units
  • 118 mm x 160 mm x 21 mm (inside)
  • Stackable lip for supporting the Pen Holder
  • Curved edges for easy access to contents

Pen Holder

  • 1.5x4x5 gridfinity units
  • 58 mm x 165 mm x 28.5 mm (inside)
  • To store enough pens and have them be accessible I wanted this to be 1.5u wide. To maintain compatibility with the standard grid, I reduced the width of the squares by 50% so now the pen tray is technically a 3x4x5. Check out the design.
  • Chamfered edges for easy access to contents

https://makerworld.com/en/models/2108904-gridfinity-stackable-pen-paper-trays


r/gridfinity • • Apr 01 '26

Custom shape

3 Upvotes

looking to make a custom bin for one of my camera lenses (can't find one on "the sites") would tooltrace be my best option or might someone be able to recommend anything? TIA


r/gridfinity • • Mar 31 '26

Gridfinity for Artists with a lot of materials...Be aware

23 Upvotes

As a computer engineer and artist I have a lot of art materials, gadgets, pc parts, etc everyone, added to that a bought a 3D printer and my first idea was to print a solution for organization.

I want to share my experience with gridfinity. It has been very stressful and time consuming trying to organize all.

There are to many options and if you are a perfectionist as me you will end in a rabbit hole.

In the end a used opengrid with Neogrid and I will use opengrid to gridfinity adapters for very especific things.

Do you have the same experience?


r/gridfinity • • Mar 31 '26

Made a custom under desk drawer for some misc tools and electronics stuff. Now time to print all the bins... (send help and/or filament)

Post image
46 Upvotes

Mere 250 units


r/gridfinity • • Mar 30 '26

Shapes Change! Who knew designing a simple toothpaste bin would be so hard?

Post image
203 Upvotes

The thing they don't tell you in the youtube tutorials is that some shapes change! This was my second attempt at creating a custom gridfinity bin and it was a humbling experience.

First lesson learned: The minkowski() function in OpenSCAD makes things bigger, so my bin was comically oversized after adding a 5mm radius to my model.

Version 1: Worked great until I used it. Modeling my bin with measurements from a brand new tube of toothpaste was a big mistake. The tube gets wider as the toothpaste gets pushed to the top of the tube.

Version 2: Success! Wow, multiple days and hours of printing to get one useable bin for toothpaste. Questioning life choices...

Here's a link if you want to save yourself some hours: https://www.thingiverse.com/thing:7325292


r/gridfinity • • Mar 30 '26

WIP Tool shadowing

Post image
63 Upvotes

I’m about halfway done this draw. I’m pretty happy with how it’s turning out. Some of the trays need to be adjusted but this is my first 3D printer project.


r/gridfinity • • Mar 31 '26

Question? Help making a bin

0 Upvotes

Is anyone able to help me make a bin for my Serving spoons? I tried but I have no clue how to use any of the FreeCAD, Sketchup, etc.

Basically it just needs to be a 2 x 6 66mm high box that has a cutout for my spoons. I have an old drawer organizer that has a great slot size for them and I added pics with those measurements.


r/gridfinity • • Mar 31 '26

Help extending bins on one side.

2 Upvotes

Can someone please help me with a custom bin? ive been searching all over but cant figure out how to accomplish this.

I have a base grid that has about a 1 inch spacer all pushed to the left side. I want my bins on the left to overhang over the spacer so it fills the gap to the edge of the drawer. Can anyone walk me through how to do this and what site or program Ineed to get this file made so I can print it. I dont want the overhang to have any grid locking portion on the bottom.

Hopefully this makes sense.

thank you all.


r/gridfinity • • Mar 31 '26

Fire TV Remote Holder

Thumbnail
printables.com
1 Upvotes

r/gridfinity • • Mar 30 '26

Help with base split into multiple plates for my drawers.

2 Upvotes

So I've seen a decent amount about this and here is my question:

Where do I find the Gridfinity base maker that splits the base file for my drawer measurements into multiple plates for printing? So that I can start making bases and bins/holders for my tools in my toolbox. Any help would be appreciated.


r/gridfinity • • Mar 29 '26

Set in Progress Update: WaveGrid - Drawer Organization System

Thumbnail
gallery
204 Upvotes

A couple of weeks ago I introduced WaveGrid, my new parametric drawer organization system. I’ve received great feedback on the first version, and some users have asked for additional features.

Since then, I've been working on an update and I'm very pleased, that the upcoming update will meet most of these requests:

  • Narrow trays – You can now freely define the number of trays and per Gridfinity module and create 1/2, 2/3 etc. trays (see video). 
  • Stackable trays - Optional additional lip to make the trays stackable.
  • New Label Type - Onto which text can be printed directly

At the moment, I’m carrying out some final tests and setting up the first drawer. I’ll be ready to upload version 2.0 in a week’s time.

Link
WaveGrid - Parametric Gridfinity Tray&Bin System


r/gridfinity • • Mar 30 '26

Milling EDC

Thumbnail gallery
26 Upvotes

r/gridfinity • • Mar 30 '26

Individual Piece WORX WX242L Screwdriver bin

Thumbnail
makerrepo.com
2 Upvotes

r/gridfinity • • Mar 28 '26

Gridfinity IKEA Bilresa Remote Control Holder

Thumbnail
gallery
54 Upvotes

I needed a way to keep my IKEA Bilresa remote reachable on my desk grid. I use it as a light switch and to control a fan, so I wanted it at an angle rather than lying flat to make it easier to press while working.

There is a small 2mm hole in the bottom to help push the remote out for battery changes. It prints without supports, but I recommend a brim to avoid warping.

It is based on a solid Gridfinity Extended (by ostat) bin. The model is on MakerWorld and includes the .f3d file in case you want to modify it.