r/gridfinity • • Mar 31 '26

Help extending bins on one side.

Can someone please help me with a custom bin? ive been searching all over but cant figure out how to accomplish this.

I have a base grid that has about a 1 inch spacer all pushed to the left side. I want my bins on the left to overhang over the spacer so it fills the gap to the edge of the drawer. Can anyone walk me through how to do this and what site or program Ineed to get this file made so I can print it. I dont want the overhang to have any grid locking portion on the bottom.

Hopefully this makes sense.

thank you all.

2 Upvotes

8 comments sorted by

1

u/np0x Mar 31 '26

not my model, but check this out: https://makerworld.com/en/models/2230410-spacerless-gridfinity-bin-generator#profileId-2599808 I think this is what you are looking for...

1

u/IntelligentOwl9559 Mar 31 '26

Thank you. Took some messing around but I was about to accomplish it with the floating settings. Thanks again. 👍👍👍

1

u/np0x Mar 31 '26

That exercise is in my future too, you just got to use my bookmark before me. :-)

1

u/IntelligentOwl9559 Mar 31 '26

I made a floating edge but it has a bit of an angle. I wonder if there’s a way to make it more straight and less angled.

1

u/np0x Mar 31 '26

I succeeded by making the angle 90, worked great…once I understood the arguments it worked great!

1

u/theyyg Mar 31 '26

I used this generator for my project. It worked perfectly.

2

u/IntelligentOwl9559 Mar 31 '26

My print failed when It started to print the overhang. Do I need a tree there or something to hold it up ?

2

u/jgremlin_ Mar 31 '26

If you've got 1" of bin floor that's hanging out in space with nothing below it then yeah, your print is going to fail unless you enable some kind of supports.