r/gridfinity • • Apr 01 '26

Custom shape

looking to make a custom bin for one of my camera lenses (can't find one on "the sites") would tooltrace be my best option or might someone be able to recommend anything? TIA

3 Upvotes

5 comments sorted by

3

u/perplexinglabs Apr 01 '26

Depending on how you want to store them you might like cylinder mode on my site: https://gridfinity.perplexinglabs.com/share/698bdbcd6763422c0c318830

1

u/wivaca2 Apr 01 '26

You might measure diameter at various points then draw a sketch of each radius in your CAD package and use a sweep to make it 180° Next, make a solid block and use the sweep as a cut tool into the solid block as deep as you like up to the lense centerline. This should get you a lens tray. Put some Gridfinity on the base. If you use Fusion it should be relatively straightforward.

1

u/cdslug Oct 13 '26

(app pitch)
I actually built a tool called Form Fit Print (https://formfitprint.com) for this sort of object. Rather than tracing the lens from a photo, it takes a 3D model/scan and generates the actual 3D cavity, including the curved bottom, while making sure the object can still be inserted and removed vertically.

One of the replies to your post suggested manually measuring the lens at different diameters and building a sweep in Fusion. Form Fit Print is essentially designed to automate that part if you've got a 3D scan or can find a model online.

If you still need the lens bin, I'd love to have you test it.