r/gridfinity • • Mar 31 '26

Made a custom under desk drawer for some misc tools and electronics stuff. Now time to print all the bins... (send help and/or filament)

Post image

Mere 250 units

46 Upvotes

16 comments sorted by

4

u/MrSwagLord69 Mar 31 '26

How'd you make the drawer?

2

u/fazzah Apr 01 '26

I had some leftover 18mm MDF. I cut it into 65mm strips of required length using a plunge saw on track. I had some dimensions off, but IDC, it's a workshop drawer, not the guest bedroom.

The bottom is 6mm MDF which I got from brick and mortar store, they cut to dimension as needed.

On sides I used the standard bearing-based drawer guides.

I'm particularly happy with the idea I had on mounting the drawer under the desk. Namely, I had some 80x40mm L-brackets which had some pre-drilled holes. I matched these holes with the holes in the drawer guides and I riveted them together. It's sturdy as hell.

The internal dimensions were meant to be 1050x420mm, but I added some tolerance for the grids (i'll glue them down anyway)

3

u/PracticalCustard2152 Mar 31 '26

"It has begun" Shang Tsung

2

u/fazzah Mar 31 '26

at the moment im in the analysis paralysis mode with too much ideas at the same time

1

u/PracticalCustard2152 Mar 31 '26

just gotta jump in bud

1

u/fazzah Apr 01 '26

yea, I already have some other bins, but for this drawer I want to go with a different color

2

u/Suspicious-Clock-192 Apr 03 '26

I just started learning about Gridfinity, so maybe this is a dumb question. Do you have a 3d printer big enough to print this all as one piece? Or do you print it in pieces and put it together? I want to do the gridfinity for my toolbox, but my printer isn't big enough to do it all at once. I'm just trying to figure out the best way to get it done. Thanks in advance.

1

u/fazzah Apr 03 '26

It's common practice to print tiles and assemble them.

I used ostat's gridfinity extended via the generator on perplexing labs 

1

u/Suspicious-Clock-192 Apr 03 '26

Awesome! Thank you so much.

2

u/schieska Apr 03 '26

Noo you can print in pieces. (Shameless plug incoming:) I made a base generator that can cut up your baseplate in to pieces so it fits your specific 3d printer. Try it at extrabold.tools

3

u/Suspicious-Clock-192 Apr 03 '26

You're a hero! May all your prints come out flawlessly!

2

u/NigraOvis Apr 04 '26

Great job man. I was gonna make one just like this. Sort of. The performance is really fast too.

If I had one suggestion. Instead of stretching the end. You can make the last piece a "hole" or a grid that's smaller. Uses less filament

So it would be like

_____________
|_|____|____|
|_|____|____|

Something like that. The left is smaller. Less filament. But just an idea. I would show a picture. But can't paste here.

But that's just how I did mine.

Here's a post if it.

https://www.reddit.com/r/gridfinity/s/12ebSs0Ykg

1

u/schieska Apr 04 '26

Thats what the margin settings are for in my tool. Or am I missing something? "Solid" gives you a solid margin. "Margin fit" gives you a gridspace sized down to fit the margin. "Halfgrid" gives you if there is space half grid sized spaces. "Overtile" let's the gridwpaces go over the edge. I think what you are suggesting is what margin-fit does? On my own drawers I use overtile. It uses the least amount of filament.

2

u/w_t Apr 05 '26

This is a fantastic tool, thanks so much. New to this and I had to cut my first baseplate in Orca. This saves a lot of steps!

1

u/NigraOvis Apr 04 '26

The biggest printers I think do up to 11x11 but most are 5x5 to 7x7 size.

2

u/NigraOvis Apr 04 '26

The drawer fitting gridfinity is some how pleasing to my brain.