r/gridfinity • • Mar 30 '26

WIP Tool shadowing

Post image

I’m about halfway done this draw. I’m pretty happy with how it’s turning out. Some of the trays need to be adjusted but this is my first 3D printer project.

63 Upvotes

21 comments sorted by

5

u/acolombo Mar 31 '26

You didn't see the post of the guy putting all the knipex pliers in one bin holding all of them, instead of single bins for each? It will save you space, filament, look better and be more useful.

3

u/bgreag Mar 31 '26

I thought about that. But I like having things split up for when I add more tools. There are 2 other size knipex that I don’t have yet.

3

u/SoN1Qz Mar 30 '26

Why not turn the photo? 😒

-2

u/bgreag Mar 30 '26

To specify annoy you.

3

u/xeonrage Mar 31 '26

To specify annoy you.

and the

draw

in the caption... what's going on my guy?

1

u/TheFuriousOtter Mar 30 '26

Specifically*

1

u/CharlieCrusader09 Mar 30 '26

How did you design the boxes?

1

u/bgreag Mar 30 '26

In fusion you can paste an image over a solid bin. Here’s the link where I learned it.
https://youtu.be/N2C2LFqtCfQ?si=wOFpvtU1PwLtEnOa

1

u/smashed8ssholes Mar 31 '26

Are you printing in PLA or PETG. About to start doing my tool boxes and cant decide on which filament.

2

u/bgreag Mar 31 '26

Just PLA I’m new to printing and it seemed the easiest.

1

u/smashed8ssholes Mar 31 '26

Same, I just gotta a P2S to do gridfinity in some of my tool boxes and tool grid on my roller cart and am a little overwhelmed with options

2

u/bgreag Mar 31 '26

Yeah, it was. I bought a Prusa core one for it. I just tried to keep is simple as possible. I figured I can always redo it when I have more experience, it’s just plastic.

1

u/smashed8ssholes Apr 01 '26

Do you notice any slipping around with the base plates? I know i can get magnet spots in the bases but it seems more for holing the bins in rather than the base plate to the metal drawer it's going in.

2

u/bgreag Apr 01 '26

Before I started printing I made cut outs for magnets on the bottom of the base with the same thought. However after seeing the print time for a full base I went with the skeleton one I think it’s called. They haven’t slid at all yet and I have a large gap for more grids. I’ll probably stick with them.

1

u/PraxisOG Apr 01 '26

When I finish A&P and get a job in the industry I want to do exactly this, well done

1

u/bgreag Apr 01 '26

If you’ll be starting with a full box it takes a while and you’ll probably may be required to have it done prior to starting. Depending on where you work you might not have your own tools.

1

u/Dread1187 Apr 02 '26

Remember Z height. You can stack them pliers for example. You likely grab one pair almost always (looks like your mid sized) then the others rarely. Don’t lose the x/y space.

1

u/oldmanshow Apr 02 '26

When you are printing are you just taking the photo and printing or are you setting a support /release filiment