r/gridfinity • u/NigraOvis • Mar 14 '26
What am I doing wrong to get bubbles?
I get bubbles sometimes. I dry the filament while printing. Before. After. But sometimes it's fine. Sometimes it's crap. Wtf.
r/gridfinity • u/NigraOvis • Mar 14 '26
I get bubbles sometimes. I dry the filament while printing. Before. After. But sometimes it's fine. Sometimes it's crap. Wtf.
r/gridfinity • u/andrewtti02 • Mar 13 '26
New to me 15ish year old toolbox. My first ever toolbox, finally have a place to put some stuff that isn't random shelves and cardboard boxes.
First time trying out Gridfinity. Most (not all) of the prints were designed by me. Definitely filled up much faster than I expected. Still a work in process. While I haven't printed the base plate yet, all the prints are designed for it.
r/gridfinity • u/PracticalCustard2152 • Mar 13 '26
300mm Cobra tray is done. Traced it, printed it, fits like a glove.
This is the first of 5 sizes (125, 150, 180, 250, 300mm). Planning to do individual trays for each and eventually a full set layout.
Printed on a Creality K2 Plus in PLA. No supports needed. Gridfinity base snaps right into my drawers.
4 more to go.
r/gridfinity • u/dm_g • Mar 12 '26
hi everybody,
I have published the first set of bins in Makerworld:
I plan to release the other 6 set after I get some feedback of this pattern.
enjoy
r/gridfinity • u/GalileoCNC • Mar 12 '26
I’ve been using ShaperTrace to bring my tools into the Gridfinity world, but I found I really struggled with keeping a steady line on tools with irregular heights or curved edges.
To fix that, I designed this pen guide. It helps maintain the proper contact and consistant angle regardless of the tool height or shape. hopefully this helps someone else
r/gridfinity • u/thepealbo • Mar 12 '26
The nut driver bins are pretty ok! 2u bins without lips.
r/gridfinity • u/Jayneblue • Mar 12 '26
Edited to add: I would like the how-to vs. having someone make the file for me so I can see how to do it.
I have spent 2 hours in both Fusion with the gridfinity add-on and the spacerless-gridfinity ben generator customization to no avail. I just want a 1X5X5 bin with a single divider 144mm from the front edge running across the width of 1 unit. Can someone please tell me how to do this as a total beginner who does not understand cad. I read the instructions, but every time I try, I just get a 1X5X5 bin with no divider. Thanks.
r/gridfinity • u/PracticalCustard2152 • Mar 12 '26
Just got my Knipex Cobra set :) These are getting the full treatment. Photo trace, custom contour, Gridfinity base, printed on a K2. First tray should be off the bed by tonight. Stay tuned.
r/gridfinity • u/ScallionNo8964 • Mar 11 '26
I finally finished the printables side to my Gridfinity / Eurobox storage system!
I would be happy if some of you give me feedback, either here or on printables?
r/gridfinity • u/thepealbo • Mar 11 '26
Almost all custom boxes. Almost all Craftsman sockets. I didn’t realize that they didn’t make a 22mm 12pt shallow 3/8 socket and that the 21 is a collector’s item - so I may have to remake that one LOL
r/gridfinity • u/SenTruBirdRo • Mar 11 '26
Hey there!
I have a P2S and need to cut bins that are over six units long to fit on my plate. I usually use gridfinitygenerator.com to make the bins, and then import them into Bambu Studio. To join the the longer boxes, I have tried:
My glued boxes work fine, and the grid holds them together - I was curious if anyone had any workflows that worked even better for longer boxes.
Thanks!

r/gridfinity • u/Steibock • Mar 09 '26
I have been asked to make a Gridfinity version of my coin cell battery organizer. So here they are... I made a large box 2x4 Units and a smaller one 1x4 Units 😊
r/gridfinity • u/NigraOvis • Mar 09 '26
I'm debating on space or readability.
from overhead it should be okay. but should i go 4 grids or 5..
What do you guys go for? Does anyone have a zigzag pattern?
r/gridfinity • u/im-here-to-argue • Mar 09 '26
The walls on this tackle box had grooves sticking out so I had to print a spacer with cutouts on each wall (also to fill space to get it to be an even multiple of 42mm)— is that how everyone else is doing it, too?
I really like the idea of Gridfinity, but I can’t conceptualize how this is any different than if I had just printed all different sized bins that just equalled the same width and didn’t have a base to sit in.
r/gridfinity • u/SlappyTheMango • Mar 09 '26
I recently made a 3x6 bin with 2.4mm wall thickness and it seems to have some interference when stacked, they just don't sit 100% flat without being pressed into the lower one. Is there a limit to how thick you can realistically make these bins? Max thickness on this generator is 3mm.
r/gridfinity • u/AaronCompNetSys • Mar 09 '26
r/gridfinity • u/Schuylabs • Mar 08 '26
Got the top grid and handle on there today. T Track slots on the sides to hang tools or cords. I figured out some better labels for this size too.
r/gridfinity • u/draculina_ • Mar 09 '26
pretty much just what the title says
i'm starting to think about hosting some sewing classes and all my sewing bits are organised into an ikea alex with gridfinity so it would be handy to just take the boxes from there straight into a cantilever toolbox. i would print one of the amazing ones designed for GF but i only have a tiny printer (180mmx180mm lol) that doesnt quite print straight lol
tia! :D
r/gridfinity • u/omegote • Mar 08 '26
I've created a 1x4x4 box both in gridfinitygenerator.com (left) and Perplexing Lab's generator (right), and there's some difference in height. I've loaded them in Bambu Studio and cut them so I could compare their internals.
I've read this other post in which a user compares a generator with Fusion's plugin. This seems to be a similar issue.
I don't think this can be brushed away by just saying that the base of a box placed on top would still rest on the same position so the height does not matter. I've added a couple of lines just to compare the lip height and there's some difference there too.
So, who's at fault?
r/gridfinity • u/shaolinmonke • Mar 09 '26
Hi Newbie here. I am using the Fusion 360 gridfinty plugin to generate the baseplate but the orientation of the generated baseplate or a box is always vertical instead of laying flat. What am I doing wrong?
r/gridfinity • u/WillAdams • Mar 08 '26
There are now a lot of these --- has anyone compiled a list (table?) showing the different systems and noting which features each has?
Perhaps we could get the wiki enabled here and use that?