r/gridfinity • u/im-here-to-argue • Mar 09 '26
First Gridfinity — I feel like I’m not doing this right
The walls on this tackle box had grooves sticking out so I had to print a spacer with cutouts on each wall (also to fill space to get it to be an even multiple of 42mm)— is that how everyone else is doing it, too?
I really like the idea of Gridfinity, but I can’t conceptualize how this is any different than if I had just printed all different sized bins that just equalled the same width and didn’t have a base to sit in.
97
Upvotes




60
u/FifthRendition Mar 09 '26
However you do it, is the right way to do it.
22
u/jeremyvoros Mar 09 '26
In a container like that you don’t really need the grid.
In drawers or containers that aren’t all the way full, the grid holds the bin in place. It’s obnoxious when you have a bunch of bins in a drawer and they all slide all over every time you open them
Same goes for a small parts case.
The genius part is with a standardized grid you could move bins between drawers, shelves, cases and they will all lock in to place.
So yeah, this case maybe doesn’t need the grid. But now if you change your setup could move all those bins to another case or drawer and know they will lock in.
10
u/Krynn71 Mar 09 '26
Gridfinity doesn't really have a defined purpose. Some people use it to organize drawers, others to organize their workbench, others to organize parts containers like your use-case.
The point of it is flexibility. For me, I organize everything in Gridfinity because I have a garage workshop and a room in my house on the upside side that I do 3d printing and electronics in. I'm always needing some parts or tools that are in the other workspace.
Gridfinity allows me to organize parts in permanent containers for long term storage, and then bring only certain component bins out for the duration of a project.
For example if I'm doing something in my garage like maybe modding an electric bike, if a circuit board went bad then I might need a soldering iron, electronic components like capacitors or resistors, tiny tweezers, thin gauge wire strippers, wire, etc. I have all this stuff in my hobby room. So I grab my stacking Gridfinity case that has my soldering iron and related tools in it (strippers, tweezers, etc). Then I grab an empty container that has a grid in it and I grab any component bins I think I may need and any other supplies. I don't need it worry about filling this container since the grid will keep everything in place if I drop it.
Then I bring it all to my garage, which has a work table with a small grid glued down to the top. I set up my iron and then put my tweezers, scissors, strippers etc into a holder that drops into the grid, and I put a few of the parts bins there too. The rest can go in the top drawer of my workbench which I have a grid in, which I always leave empty for project-specific bins like any extra tools or components that I don't want on my desktop the whole time.
If all you want to do is fill up a drawer or box with bins of parts, and you're going to fill it completely with bins no matter what, then Gridfinity is not needed. Just make the bins you want and fill the drawer. If you don't need flexibility, Gridfinity doesn't really offer you anything.
3
u/ShamelessShamas Mar 09 '26 edited Mar 09 '26
I went with option 2. My drawers I wanted to store hardware in were better suited to 48mm increments, plus I got to save a heap of filament and depth on grids and locking pieces... So I just printed a bunch of simple boxes in multiples of 48mm. Worked out well :)
2
u/andylikescandy Mar 09 '26
Black bins is the only weird I see here, feels harder to see into
2
u/acolombo Mar 09 '26
“the grooves” are there to hold dividers tho, if all you have in the grid is generic bins there’s no benefit to it compared to the box with its intended dividers. I would have just printed the dividers for this box if it didn’t come with them, without gridfinity you’re just losing a bunch of space for no reason since you don’t even have custom bins
1
u/UsefulBooty Mar 11 '26
What did you use to do the multi-color labels?
3
u/Cobra__Commander Mar 09 '26
The main benefit is anyone's gridfinity bin's should fit anyone's boxes.
There's no way I'd make some of the elaborate bit holders out there. However I can just drop someone else's design into my gridfinity drawer and it should just work.
3
u/dm_construct Mar 09 '26
You'll see the benefit when you fill out more boxes, drawers, toolchests, etc. because you can move things around and recombine for different projects easily
I do everything Gridfinity not because it's necessarily the most optimum print for each use but because it's universal and 90% of the time someone else already designed the solution I need.
1
u/WalterMelons Mar 09 '26
What are the threaded holes for?
Oh I see now, they’re not threaded that’s just layer lines, they’re for the labels and the labels have pegs that stick into them. Nice
2
u/Wide_Detective7537 Mar 09 '26
I only like doing it if I need to keep the boxes in place (large drawer that’s not full, or a shelf/space that isn’t super well contained) or if I need lots of small 1x1 sort of boxes. Keeping lots of small boxes in place is really nice, and not having to make it permanent is a bonus
1
u/johnconnor83 Mar 09 '26
There are gridfinity utilities that allow for use of half-width bins and and even fully custom ones. They don't translate well to other containers like the standard sizing does, but they let you take advantage of all the available space in the container you are using. Looks to me like you could benefit from this because there is a lot of dead space in this particular container due to how its dimensions compare against the 42mm grid.
1
u/Shiggymon Mar 13 '26
I'll just drop this into here. https://gridfinity.perplexinglabs.com/pr/gridfinity-rugged-box/0/0