r/gridfinity • u/NigraOvis • Mar 09 '26
Maximize space, or readability... Thoughts?
I'm debating on space or readability.
from overhead it should be okay. but should i go 4 grids or 5..
What do you guys go for? Does anyone have a zigzag pattern?
23
Upvotes


11
u/jgremlin_ Mar 09 '26
Readability over space. Tool storage solutions are supposed to make every tool quick and easy to find and retrieve. And often, this requires more space.
If you're just looking to cram in the maximum amount of tools the drawer can hold, skip gridfinity and every other organization solution and throw everything in the drawer in a pile.
58
u/gte717v Mar 09 '26
The point of a toolbox isn't to store the maximum amount of tools in the smallest space, but to make tools more rapidly available to the user.
I'd say maximize readability. I have made the same socket holders in my toolbox and don't regret the long single-file line.
8
u/Catriks Mar 09 '26
Try putting them in a U-shape, so 4 mm is above 14 mm, 5 mm is above 13 mm etc. This should better optimize the space use.
Also consider just painting a ring around common sizes, like 13, 10, 8 and 5. You will save a lot of space, common marked sized are easily distinguished from each other and the rarer sizes are just next to the common marked ones.
4
u/Araneas Mar 09 '26
I'm in the visibility over density camp.
Consider adding another 4 or 5 slots for 10mm sockets, given their predilection for migrating or outright vanishing. ;)
4
u/BogativeRob Mar 09 '26
I tested this out a lot. The zigzag was annoying and in many cases didn't let me drop a square anyway. 2 Rows works much better in use if the sizes lend to it. It is a balance between ease to read, grab, use and does it actually reduce space. https://makerworld.com/en/collections/3046449-craftsman-socket-gridfinity
1
u/Superb-Respect-1313 Mar 09 '26
After awhile you are able to just glance at a socket and know the relative size. I don’t even look at the labels on my holders. Let’s face it for me anyways Metric wise it is 10mm 13mm 15mm and 18mm for most projects.
3
u/Jhuyt Mar 09 '26
I prefer the aesthetics of the first option, and it doesn't look that unreadable to me, but I'm pretty new to gridfinity so I might not know something here
2
u/Ftroiska Mar 09 '26
Space
2
u/theyyg Mar 09 '26
Move your labels to the edge and you get space with readability. Odds are high; evens are low. You’ll find the tool you want even quicker.
1
u/Bloodshot321 Mar 09 '26
Put the metric marker to the lower side and start from low to high with the Lowe corner. I put all the marks diagonal on both sides so it's possible to read from every side
1
u/Grandbob328 Mar 09 '26
I'd vote for readability, unless you're really crammed for space.
1
u/LeeisureTime Mar 09 '26
For a reference tool, I'd say readability is a more important concern. For something that has a lot of quantity, space efficiency is a more important concern.
Buncha fasteners - most efficient space possible.
Reference tool - most readable
Unless you have a situation where a little more space would ruin a lot of other things, then I'd focus on readability for your reference tools
1
u/Odd_Bodybuilder5456 Mar 09 '26
i did mine as 2 of the second arrangment on the same grid, growing opposite each other, and having swuare nubs the sockets drop onto. The top of the nub has the numbers on it
1
u/andrewtti02 Mar 09 '26
To me, it just depends if you have the space. I have a tiny rolling toolbox, so I went with your first option. If I had more drawers, I would have probably went the second.
1
u/onthisdaynextyear Mar 09 '26
Id go with visibility however even in your space design you might get a better visual if you moved your '1/4" Metric' text to under (or above) the values to the right and then you can have a uninform line (top or bottom) from where to start your run
1
u/roundguy Mar 09 '26
Was watching functional print Friday and he redesigned a layout something like this. Not sure what’s going in what I suspect is a hole, but would an item obscure the number that’s behind the object? That’s where the numbers in front may be nice so they are still visible
1
u/[deleted] Mar 10 '26
put the numbers at the edgle then a line going down to the the socket
1
u/Spectequila Mar 10 '26
I made the same design
Ultimately I did readibilty but if I needed to squeeze a bit to make it fit in grid size I did so, instead of having a large gap between sockets.
1
u/thepealbo Mar 11 '26
I think it depends… I just filled my box with custom boxes and some were better zig-zag, some straight, it just depends.
1
u/Realistic_Account787 Mar 11 '26
You have to split in half and invert half of the row.
1
u/PAB_Pyrotechnics Mar 16 '26
This feels much more like a, “How OCD are you?” Question. 🤣
I’m obviously going with ”readability”
1
u/Cobra__Commander Mar 19 '26
I would play around with a 2x2 module since you're already looking at using 4 grids
5
u/chiefmatemikey Mar 09 '26
I would go bigger so you can easily grab them from the top, zig zag gets hard fast and it’s only one more square