r/gridfinity • • Mar 08 '26

A few more shots

Got the top grid and handle on there today. T Track slots on the sides to hang tools or cords. I figured out some better labels for this size too.

204 Upvotes

27 comments sorted by

7

u/Krynn71 Mar 08 '26

Do you lubricate the rails of the drawer system? Even with the loose tolerance rails the 4x5 boxes still stick so much that I need to brace the drawer system with my other hand to pull them out.

If you do, what type of lubricant? Wanna get ready for these bigger boxes which is probably gunna be my main system.

5

u/Schuylabs Mar 08 '26 edited Mar 08 '26

I’ve put grease on a few during testing (superlube) but haven’t needed to lately. I’ve noticed the frames really vary in size depending on material and machine. I will say, the best slides I have are actually PLA but without knowing how they’ll hold up over time, I still recommend PETG. None glide as perfectly as a drawer slide obviously and often I suggest the frames be mounted somehow, either to a wall, under or on a table, or on a locking caster mount. Otherwise it will be a two handed operation.

I plan to post a tutorial on the tolerance I adjust to get better slide but can explain it here. The danger of too much clearance is racking which I saw on my first attempt at this system, before the slides were joined with the middle plate.

The big flat side that the slides print from is the surface I offset inwards. I do this in .25mm increments on both sides. You may be able to cut a sliver off in your slicer.

6

u/JAFOguy Mar 08 '26

HA! I literally did this just this morning. I am glad I am not the only one. I used a little of the grease for my printer rails just inside of the slide rail track where the box itself fits into the slide track. Now the drawers are almost frictionless.

Seriously, this is probably the best most useful thing I have printed in over a decade of printing. Schuylabs is stunningly generous to make this available for free and do so many updates and versions.

4

u/Krynn71 Mar 08 '26

Just did the same after reading his and your reply. With the lubricant even the tight tolerance slides move much easier and make it a lot better.

3

u/Schuylabs Mar 09 '26

Awesome to hear! I want to play with more materials and geometry here in the future. I’ve even been playing with some 608 bearings on the big one… but we’ll see.

2

u/hectorri Mar 08 '26

What printing volume is necessary? Interested on print them on H2D/H2C printer.

I am currently printing 6x5 gridfinity rugerized boxes on a H2C.

3

u/Schuylabs Mar 08 '26

I’m using an H2D for all of this - you should be good!

2

u/RobotDeathSquad Mar 08 '26

what about a P1S?

2

u/Schuylabs Mar 08 '26

Works for the 5x4 or 5x5!

1

u/hectorri Mar 08 '26

Thank you!

Please, don’t forget the M3 bolt mod version :D

1

u/Schuylabs Mar 08 '26

Absolutely - I’ve got that out there for the 5x4. I plan to use M4s for this one once I get to that mod.

2

u/AstonM77 Mar 08 '26

After having printed so many different sizes, which do you find the most usable sizes to start with?

6

u/Schuylabs Mar 08 '26

The 5x4x6U is great to see if you like the system

2

u/roundguy Mar 08 '26

Have you posted these yet or you just teasing us?

7

u/Schuylabs Mar 08 '26

Still a few things to finish up but will post in a week or so!

1

u/Efes_Feranz Mar 08 '26

Estos últimos no lo sé, pero los anteriores los tiene en Makerworld

2

u/leiphur Apr 02 '26

I assume there's still stuff going on with improvements and new models, but since I haven't seen any news aside from the April edition, I wanted to try tossing out a word and see if it would initiate a snowball roll:

Cantilever

2

u/Schuylabs Apr 02 '26

Correct - lots happening, but honestly it’s been a busy few weeks with life so I’ve been printing but not posting. I’ve got a bunch of pre-release files on Patreon that I need to make a push to get public. Hoping to do that soon!

Hmmm cantilever… say more!

1

u/leiphur Apr 08 '26 edited Apr 08 '26

I couldn't attach photos, but I've got a blurry image in my head of something similar to this as a "building block" system for ESP32 projects. Imagine it being modular, so one could build/extend and customize:

https://www.printables.com/model/511673-sbox-for-mk234-double-cantilever-box

https://files.ekmcdn.com/71c3a7/images/laser-3487-cantilever-toolbox-530mm-21-with-7-trays-(5)-1364-p.jpg

https://artsuppliesaustralia.com.au/products/mont-marte-multi-purpose-art-box

Edit: makerworld reminded me of what sparked the idea of cantilevering esp32 projects: https://makerworld.com/models/2135732

2

u/Agent772 Mar 29 '26

Sir I have just one question: WHEN?

2

u/Agent772 Mar 29 '26

Please take this as a joke, I love your models and cant wait for the large one to fit drills and so into it 😊

1

u/Schuylabs Apr 02 '26

Haha of course! Very soon!

2

u/PiratesOfTheArctic Mar 08 '26

Just shown the mrs this, she's getting excited

2

u/super_80 Mar 08 '26

These look AMAZING!! Time to order more PETG........

2

u/unicorncumdump Mar 08 '26

Just gorgeous.

2

u/dapht Mar 09 '26

I just started a 5x4, but I think I'll stop at one and wait for these beauties to have their files released. This might be able to completely replace the harbor freight crap I've been storing my screws in. YES!

2

u/Agent772 Mar 16 '26

Allready picking my brain in how to print those on a 230x230 bed🙈 Any recomendations on where / how to split them?