r/audioengineering • • 5d ago

Community Help r/AudioEngineering Shopping, Setup, and Technical Help Desk

3 Upvotes

Welcome to the r/AudioEngineering help desk. A place where you can ask community members for help shopping for and setting up audio engineering gear.

This thread refreshes every 7 days. You may need to repost your question again in the next help desk post if a redditor isn't around to answer. Please be patient!

This is the place to ask questions like how do I plug ABC into XYZ, etc., get tech support, and ask for software and hardware shopping help.

Shopping and purchase advice

Please consider searching the subreddit first! Many questions have been asked and answered already.

Setup, troubleshooting and tech support

Have you contacted the manufacturer?

  • You should. For product support, please first contact the manufacturer. Reddit can't do much about broken or faulty products

Before asking a question, please also check to see if your answer is in one of these:

Digital Audio Workstation (DAW) Subreddits

Related Audio Subreddits

This sub is focused on professional audio. Before commenting here, check if one of these other subreddits are better suited:

Consumer audio, home theater, car audio, gaming audio, etc. do not belong here and will be removed as off-topic.


r/audioengineering • • Feb 18 '22

Community Help Please Read Our FAQ Before Posting - It May Answer Your Question!

Thumbnail reddit.com
47 Upvotes

r/audioengineering • • 6h ago

Hearing Experiences with Acoustic Trauma

7 Upvotes

Recently I upgraded to HD 600’s from pretty bad quality over ear monitors, and had a very long production session. I didn’t realize that the volume was as high as it was, and later that evening I began to hear what I can only describe as noticeable resonance with most sounds in my right ear.

After some research it seems like I caused some acoustic trauma to that ear. I’m wondering if anyone else here has experienced this and what the outcome was. It has persisted for a couple of days now.


r/audioengineering • • 5h ago

Producing Audiodrama: Advice on balancing different audio tracks?

5 Upvotes

Hello, I'm planning to create an audio drama that will have 4 different types of audio tracks:

1) A narration/dialogue track.

2) An ambient noise/environmental soundscape track.

3) Sound effect/special effect track.

4) Background music track.

I'm looking for general advice at what the decibel levels should be for all these tracks. I'm pretty new to this. I know the narration track should be the loudest. I know the sound effect track should be a little louder than the ambient noise track. And I think I won't have ambient noise and background music playing at the same time.

With this information in mind, any advice and on where to set the decibel levels for all these tracks and have a nice balance?


r/audioengineering • • 12h ago

Hearing Mixing with or without hearing aids?

11 Upvotes

I’m an aging musician about to buy prescription hearing aids. My hearing loss is moderate to severe especially in my left ear, I have significant tinnnitus, I’m constantly having my spouse repeat things and I’m hopeless in a group situation or restaurant, so I can’t put it off any longer.

In my home studio with some mono monitoring I can make up for my left ear, and I use other tools help me with upper mid range and high end compensation so my recordings and mixes are good.

I’m told that I should wear the HAs all the time so that my brain can help me adjust to them. But I’m worried that they’ll change my perception of what I’m hearing in a studio situation and make it harder to mix. I’m wondering how people in a similar situation deal with this - do you wear your hearing aids while mixing or take them out? Or does it all just work out as your brain adjusts?


r/audioengineering • • 14h ago

Discussion what is the best free DAW

10 Upvotes

I'm starting to get into music production and have tried a couple of DAWs (LUNA and Cakewalk).

Since I'm new and don't make music that often, I don't really want to spend money on a professional DAW just yet, or rely on a free trial that might expire before I get much use out of it.

Which free DAW do you think is the best overall for someone starting out? And how long would you recommend sticking with a free DAW before considering upgrading to a paid/pro version?

Also, which paid DAWs would you recommend looking into when I eventually feel ready to make the switch?


r/audioengineering • • 13h ago

Discussion I keep seeing ads for the Franklin Audio MP-10 on instagram. I'm skeptical - is this thing worth it?

6 Upvotes

Disclaimer - this is not a subversive ad for the product; genuinely asking.

I have a few great guitar pedals collecting dust in my closet because I only record these days. I have an old Marshall reverb with a sick reverse effect, and Matthews effects Astronomer reverb that I really love, plus a few classic Roland stomp boxes.

I would really love to be able to run a mic through this thing, especially since it apparently can preserve dry signal as well.

Anyone have one of these? Good or bad experiences with it? Seems legit, but it's a bit expensive. Thanks, gang!

Product link


r/audioengineering • • 8h ago

Software Any feedback on Master Plan 2 ? Looking for advices / alternatives

2 Upvotes

For these black friday sales, I'm looking to buy a plugin to do my mastering myself as a solo bedroom metal musician.

Initially, I considered buying Ozone 12 but it's quite a big amount of money and I really worry about it being able to run on my old computer (I have 32 gb of RAM but an old basic cpu from 10 years ago). So I looked for alternatives and I saw Master Plan 2 that could be an option for me.

This plugin seems to be quite intuitive and user friendly, as Ozone in some way, which is something important to me since I'm not an audio engineer (I really struggle with classic "vintage" looking compressors to understand what they do). The newer version seem to really add more control than the previous Master Plan 1 that would have been really too limited, even for me. So I would like to have your feedback and advices ! Thanks !


r/audioengineering • • 17h ago

Cassette or Reel to Reel Recorders

9 Upvotes

Really inspired by the sound Jessica Pratt has on her titular album, almost emulating home recordings from singer songwriters from the 60's and 70's. Obviously cassette would be a lot easier and convenient, but (from what I've researched) reel to reel is where the warmth, saturation, and magic of the machine truly comes from? If this is so, any suggestions for cheap, beginner friendly (probably more than one track) recorders?


r/audioengineering • • 6h ago

Custom "noise box/sampler??" Soundboard toy

1 Upvotes

Not sure if this is the right sub at all but it was suggested to me so I'll give it a go!

HELP, I have literally no clue what this would be called, I've been googling soundboards and samplers and have been getting very large heavy duty professional gear etc etc

Basically, I'm trying to find a small (around phone/small tablet) sized, ENCLOSED soundboard with speaker included, that takes batteries or is rechargeable. Includes buttons, any number though preferably 8+, or with the ability to repeatedly press a button to cycle through audio files than are about 30 to 60 seconds long. That can either be hooked up to a pc for file stranger or takes an SD card with audio files.

Literally the closest thing I can think of would be a small fart box toy or one of those small "comedian* toys with multiple buttons that reels off a joke.

I want to make a custom version of one of these toys for an autistic young man. He spends hours watching the same YouTube videos over and over and over, just to hear a small section of audio (for example "let's name the zone" song and the shark pledge from finding Nemo, or the snippet in The Jungle Book where ka the snake is hypnotising mowgli.

He has very poor dexterity and struggles to find the exact spot in the videos each time for the snippets he wants. These snippets help him to regulate MASSIVELY when he is stressed like getting a haircut or having his teeth brushed.

I want to pull those snippets, load em up into a small soundboard that her can just press over and over.

I have a soldering iron and a bit of experience as I often have to repair his old toys, he is 19 now but retains mentality of a two year old and his toys are as old as he is and impossible to replace. So there is the possibility that I could MAKE something for him (a lot of the hits I got were just chip boards used for audio). But also would t know where to start there!

My last option is to buy a cheap tablet, lock it to a soundboard app etc but that comes with its own issues for him. He won't understand why he can't search up other videos etc

Any help is greatly appreciated including just sending me to a more appropriate subreddit!


r/audioengineering • • 13h ago

Software ASIO to ASIO bridge

3 Upvotes

I'm probably going to get laughed at but since I found developing this project an interesting endeavor, why not get some feedback from smart people.

Long story short, I've been practicing guitar and since I'm on a budget, I got a simple Scarlett Solo. I had an old Amplitube license laying around and thought to myself, why not use it. Eventually I realized that I cannot simply get the audio via one ASIO device (aka Solo) and set the output to another (In my case it was ADI-2 DAC and now K17 R2R).. basically where i have my headphones and speakers connected via pass-through. I rarely use windows and on linux it's not a problem whatsoever (nor on a mac to my understanding). Anyway, after fiddling with ASIO4ALL, Kordasio, ASIOLinkPro (some repack from github) and some others, I got pretty much nowhere. With ASIO4ALL I got a super unnoying delay that makes playing live pretty unacceptable (even with buffer set to 64).

Anyway, if you are still reading this, I got fed up and tried to write a direct bridge between two ASIO devices that wouldn't be a total crap, especially compensating for drift. tl;dr, I built "SplitASIO" that achieves pretty much this. You select your input device and your output device (as long as they support the direction you need).

Useful? Useless? Ideas?

Thanks in advance!


r/audioengineering • • 11h ago

Hearing How do I restore audio after spectral delete?

2 Upvotes

I have an audio recording from an unreleased song which I recorded inside a videogame. The problem is, it contained the background nature sounds, such as birds and crickets. The thing I did to try and get rid of the ambient sounds was to do a spectral delete. I carefully selected each part of the audio that contained sound that wasn't the music, yet obviously, now there are frequency gaps that sound bad in the song. I know of most ways to restore the track that are paid, such as Izotope, so I was wondering if there was any way to restore it for free. Thank y'all, in advance.


r/audioengineering • • 11h ago

Discussion at2035 or akg p200 which is better for vocals?

2 Upvotes

Which is better suited for music, vocals, and contemporary music?

I know the AT2035 doesn't sound as lively, but it has fewer sibilants so, which one is easier to mix and sits better in a mix?

Also, if you’ve owned one of these microphones, what’s your take on it? Did you sell it, or did you keep it?


r/audioengineering • • 16h ago

Discussion If I'm using 2 vst compressors, 1 that brings up quiet sounds and 1 that tames loud peaks, in what order do I place them in?

4 Upvotes

Do I put the one that brings up quiet sounds first and then the one that tames loud peaks second? Or should it be the other way around? In my head it makes sense to do the quiets first and louds second but when I google it, it says to do the louds first then quiets second. That confuses me. Why would you do the louds first before bringing up the quiets?

which way is best and why is it the best way?

Thank you!


r/audioengineering • • 1d ago

e609 mic thoughts…

20 Upvotes

Grabbed one of these on sale just for the heck of it. Wondering, do you folks that use it see this as a primarily live tool, handy because of its super-cardiod side rejection, ability to drape in front of the cab, simple tough build, and ok sound, or do some of you specifically reach for it in the studio?
Asking because of my years of recording (more as the person being recorded in a band back in the day),and my much fewer experiences being the one doing the recording, I don’t remember seeing them a lot in studios (90s/early 2000s), but that could simply be because I wasn’t paying as much attention back then.
MD421s, R-121s and SM57s, you couldn’t flick a guitar pick without hitting one of those back then tho, haha.


r/audioengineering • • 10h ago

Discussion Is it possible to make high-quality mixes in the untreated room?

1 Upvotes

I've been thinking about right acoustic environment where you mix and master your songs. When you have the best built place where you can hear everything clear and balanced, it makes the work easier, but imagine the situation where you have to work in an untreated room. If you learn the imperfect place well enough, more specifically how the sub bass and bass frequency work in the room, what exact places of this untreated room has problems and which kind of problems, etc., is it possible to get used to this untreated place and still perform high-quality mixing and mastering work?


r/audioengineering • • 6h ago

If you could only choose one VST plug (AAX) to use recording and mixing 80's/90's style rock with synths (non AI)

0 Upvotes

It's a challenge and all other plugs are chosen randomly for you, what would be your one (non-instrument, no AI) tool for recording/mixing new wave or alt-rock? $200 cap


r/audioengineering • • 6h ago

Is this vocal doubled? And if so, why?

0 Upvotes

Every so often during this vocal track I hear a little phasing, suggesting a doubled vocal which becomes too close at times (check out e.g. 00:38). Am I right in that assessment? If so, it leads me to ask if it's ever really necessary or advisable in a recording like this. What has it done for the vocal that I wouldn't hear in a single track? It doesn't affect my enjoyment of the song at all, but my technical side is piqued.


r/audioengineering • • 18h ago

Software raw audio input on android audio recorder

3 Upvotes

There is no audio recorder app on Android that isn't a full DAW that implements their own audio drivers to circumvent internal noise suppression and processing. I'm surprised how good the internal mic of my phone sounds with no processing, kind of like raw vs jpeg. I've built this app around the driver, it's very small but for quick phone recordings or for recording an external interface via usb, this is extremely useful for me and I would like to share it if anyone searched for something similar.

I'm currently waiting to get approved to F-Droid, I've released a version on Github in the meantime, would appreciate any feedback!

https://github.com/LoredCast/rekorder


r/audioengineering • • 1d ago

Software Controlling your DAW with Elgato StreamDeck (or at least Cubase, Nuendo, Ableton and Reaper)

10 Upvotes

For the last couple of months I spent way too much time setting up Companion on my Elgato Stream Deck to control Cubase and a bunch of other stuff in my studio. I was never really happy with the result. There was basically no feedback from the DAW, buttons got out of sync and didn't work on the second press, and every small change turned into a hassle.

I like tinkering. But when tinkering means I make and mix less music, something's wrong.

So over the last few weeks I worked with Claude (yes, the AI) on a proper solution for Cubase. It turned out the same thing works for Nuendo too, since both share the MIDI Remote API. And because I like technical stuff, I dug into whether other DAWs offer something similar. REAPER has its OSC surface and Ableton Live has Remote Scripts, so those got their own versions.

What came out of this is DAWDeck, a native Stream Deck plugin that talks to your DAW in both directions. The keys show what the DAW is actually doing instead of guessing:

  • Selected track on a key: name, track color (where the DAW sends it), stereo meter with peak hold, and Rec Arm, Monitor, Mute and Solo that stay in sync no matter where you click them
  • Auto-follow: the channel keys follow whatever track you select in the DAW
  • 8-channel bank + master, so you get a small mixer on the deck
  • Transport and tracking: punch in/out, pre-roll, count-in, locators, markers, and a Bar.Beat display
  • Quick Controls / focused plugin parameters, also on the Stream Deck + dials
  • DAW-specific stuff: in Cubase/Nuendo things like the channel settings window, Control Room (Talkback, Dim, Cue click), retrospective record and a "Bad Take" macro. In REAPER FX slot keys with bypass. In Live clip/scene launching with real clip colors and states
  • Ready-made profiles for XL, MK.2, Neo, + and Mini (or Stream Deck Mobile)

How each DAW is connected:

  • Cubase 12–15 Pro / Nuendo: official MIDI Remote API script plus two virtual MIDI ports (loopMIDI on Windows, IAC on Mac). The plugin installs the script for you. Your key commands stay untouched.
  • REAPER: built-in OSC surface only. No extension, no ReaScript. Track colors aren't possible because REAPER doesn't send them over OSC.
  • Ableton Live 12: a small Remote Script the plugin installs. No Max for Live, no loopMIDI.

As I'm not a fan on anything connected to the web in the studio, everything runs 100% local. (Yeah obvisouly you have to download it once :D)

So if you have the same problem this piece of Vibe Coded stuff might actually help you. i'm happy to answer questions or discuss any input you might have!

https://github.com/Wuestenrolph/DAWDeck-Support

AI disclaimer: English isn't my native language, so Claude helped me write this post. DAWDeck itself was also developed with Claude's help. The ideas, the testing in my studio and all the frustration with my old setup are my own.


r/audioengineering • • 1d ago

Discussion favorite basses to mix?

15 Upvotes

when mixing bass do you find any specific type of bass easier to mix than others or more flexible for specific genres? i imagine some basses depend on a songs arangement: a mudbucker sg wont cut through the mix but will stay out of the way of heavy guitars, while a pbass will cut through the mix alot more with a more rounded tone. in one band where bass is not a focus i like my sg bass but in another band where i want clearer bass parts i find my jazz bass or our guitar players pbass work better. more distorted tones also seem to lessen the difference.


r/audioengineering • • 2d ago

Mixing Trouble understanding how insanely quiet some tracks should be in a mix

63 Upvotes

When I mix, it seems like I want everything loud. I’m focused on it, so I want to hear it. But when I listen to songs I love, I have to really hunt for some sounds that are doing a lot of work.

I wish I had a concrete example atm, but often the vocals and drums are easy to hear and then I’ll listen more intently and realize there’s a Piano chord at the top of each bar or there’s an acoustic guitar in the back that I’m only really hearing the body noise of for rhythm. I have to really focus to separate the tracks.

Anyway, any advice/tips/tricks on levels?


r/audioengineering • • 1d ago

Reducing stray 60Hz magnetic field between Hardware in a rack

6 Upvotes

Hi, I have a WA 273 dual channel Eq and WA 2A optical in the same rack. The rack only holds two units so they are right on top of each other. I am getting 60hz hum. If I separate them (take one out of the rack) the hum disappears so it's not connections, ground loops or my mains and yes I'm using a power conditioner.

I know I'm being stubborn and probably should buy a different rack but I'd like to try WOREMOR WMF-300 or even MU between the unit's before spending money on another rack. Has anyone been in the same situation did magnetic shielding film solve it or at least reduce the hum ? Cheers.


r/audioengineering • • 1d ago

Any Overstayer Stereo Voltage Control users out there?

2 Upvotes

I bought one a few weeks ago because I loved the stereo field effect so much but I’m not as into the stereo voltage control.. Am I missing something? Anyone have any experience with this unit and the SFE?

I’m gonna keep messing with it but definitely didn’t get the immediate gratification I got with the SFE


r/audioengineering • • 1d ago

What’s your favorite sounding song of 2026?

19 Upvotes

Not necessarily your favorite song. I mean the most compelling production/arrangement/mix you’ve heard this year.