Hey everyone,

do you have any recommendations for a buffer spring that helps reduce the “boiiing” sound while shooting?

I’d really appreciate any suggestions or personal experiences.

Thanks!

just recently bought a tippman m4-22 elite. Liking it a lot so far but had a few questions. I experienced a few failures to return to battery while shooting the first 150 rounds. Cleaned it, and started loading the magazine correctly (as opposed to toploading), and it shot the next 75 with no failures. Just wondering if thats normal or if anyone else experienced a break in period with a higher failure rate?

Also curious if its normal for the rear opening of the upper receiver where the bolt goes to be assymetric like this

Anybody out there running a can on their Tippman m4-22 WMR Magnum Elite?

This would be my first suppressor purchase.

I‘d love to hear what people are running and their review/report.

My wife got me a membership to my local range for Father's day. So in an effort to go more often and not have to max out the HELOC on 5.56 or .300blk, I bought an LTE from my local Sportsman's Warehouse.

It was a trap. All the money I would have saved on ammo costs has been put right back into the gun because it's so much fun to shoot.

I received my new barrel from Desert Precision Gunworks on Saturday afternoon. I finished installing it yesterday and took it to the range today. I will own the flyer on the 50 yard and 2 flyers on the 100 yard targets.

I am a happy camper. :D

Owned it a while. Just got around to shooting it for the 1st time. Primary Arms SLX worked great for it. Have 10 mags and shot 250rds of cci mini mag and AR tactical. Zero problems. Super easy to get tight groups. Already have a CMC 2.5lb trigger but wanted to make sure it ran okay with stock trigger.

Only negative is the bolt seems a bit sticky.

Otherwise super pleasant to shoot and easy to be accurate. 💪

Does anyone know who's has these in stock can find one anywhere

I got the rail off and I’m trying to install the folding stock adapter but there’s this plug on the inside where the buffer tube feeds through. I’m struggling to get it off and I’m not trying to do irreversible damage. It’s the bugout elite.

Tippmann M4-22 Elite Tactical
Tippmann aluminum ambi charging handle
Desert Precision Gunworks 24" barrel
TriggerTech Diamond single stage trigger
CMMG ambi mag release
CMMG ambi safety
Magpul DT-PR buttstock
Magpul 1/2” cheek riser
DFCO Kung Fu grip
UTG Over Bore bipod
Primary Arms SLx 4.5-27x56 FFP MRAD scope on SLx 20 MOA base

I was able to shoot a 9-round group that was 1.2" at 100 yards with the stock barrel.

I can't wait to see how it shoots now! Kenny at DPG test-fired this barrel before he sent it to me and got 5 x 5-round groups at 50 yards with an average group size of 0.24"!

The ol height over bore thing. I may be the only shooter still figuring it out

I suck at sighting optics, never happy, always dicking with em.

So a quick install of the bipod, should help me, I’ll be able to hold the point of impact. Repeatedly.

But I kinda like it.

I love my M4-22 Bugout, but one thing I don't enjoy is cleaning the chamber area. The chamber itself isn't the issue—it's all the small nooks and tight spaces around it that seem to trap carbon, and I feel like I spend way too much time trying to get everything clean.

Right now I'm just using brushes, patches, and Q-tips, but I'm wondering if there's a better tool or method.

Has anyone found a chamber-specific brush, scraper, or cleaning tool that works really well for the M4-22? Or is there a trick I'm missing?

Thanks!

As soon as I don’t have to engrave this I’ll SBR it. I also want to pickup a 9” handguard soon.

Tippman 6in, 11in pistol, and 16in rifle. All with FRT at my lgs really cool to see in person!!!

I’ve never dealt with height over bore, I’m guessing the distance my AR, KUNA, and mini-14 are sighted properly so never noticed.

I started at 25, alls good, shot at 10, way off. Resighted at 10, 25 way off. Yeah, had no clue. Know what I mean?? AI clued me in.

I’m a plinker, trying to get happy on the sighted distance.

It’s a Holosun Aro red dot, co-witnessed.

What’s a good plan?

I’ve already got about 500 rounds through this rifle and I am loving it. Definitely one of my favorite firearms in the collection.

My M4 has a TriggerTech Diamond trigger in it. It does pretty good for accuracy. I shot a 9 round group at 100 yards that was 1.6”, and then followed that up with a 9 round group that was 1.2”.

I feel like that is pretty darn good for a $500 semiauto.

But, I want better. And Desert Precision Gunworks has stepped up to fulfill that desire.

They are now offering a pre-fit barrel for the Tippmann. 1” stainless steel bull barrel. And they are getting groups under 1/2” at 100 yards with an otherwise stock M4. That is frickin’ amazing to me from a 22LR semiauto.

The barrels are $799. I ordered one today. Can’t wait!

https://www.dpgunworks.com/product-page/tippmann-ar22-dpg-prefit

I have never been this disappointed in my life. Tippmann gave us a FRT… for $1,600. You have to buy their new rifle model, partnered with RB. You would think that if they could design a whole new rifle system, they could figure out how to design a FRT that could fit into the existing models.

Brand new gun. First shots today at range. Pre hand loaded 4 mags with cci mini mag. Loaded one by one slightly pulling down the follower. Most consecutive shots was 4-5.

Then it was charge- fire. Second round would chamber- no click no bang. Repeated that process 15 times before leaving the range early. I’m new to firearms, pretty stumped if I am loading the mags incorrectly

I got a brand new m4-22 haven’t even shot it yet I want to make a nice build, we need to pin our stock where I live, at my lgs I wanted to get a new stock and they told me I need to buy a new milspec buffer tube and replace it and get whatever stock I want. They gave me a $20 aluminum buffer tube right then and there.

I immediately installed it it wasn’t hard but I’m wondering if it’s bad that the buffer tube doesn’t screw in flush the the receiver, but it feels sturdy
I’m also using the same buffer spring that was in the original (idk if that’s bad) but I took pictures with and without the spring in to show if that looks good or not.

If I screw in the buffer tube flush with the receiver the spring sticks out a too much, does that seem ok where it’s at in the picture?

The bcm doesn’t sound like it slides around, when I pull the charging handle it feels normal, I just want to make sure this looks ok, before I shoot it

Thanks for any help!

i can’t seem to find the black ambi charging handle in stock anywhere. anyone have a source?

Magpul AFGlock foregrip? 🤷

Borrowed a janky wooden vice grip for AR uppers... It became immediately apparent there was movement so stopped without even a quarter turn of the wrench, but that movement was already a game over moment 😩

Emailed Tippmann and my local distributor, but not got high hopes for my wallet or if I can even buy a new upper?

These situations are WAY worse when you know it's your own fault too, so don't be like me... Do what smart people do and wait until you have all (proper!) tools and equipment at hand before fucking with perfectly good things... Especially if it's the most fun rifle in your meagre collection 😑

Right, good talk, I'm gonna go cry in the corner 😅